W211 AMG Discuss the W211 AMG's such as the E55 and the E63

Oil Geyser from Filler Cap

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 09-30-2018 | 10:10 PM
  #26  
Pmarino's Avatar
Senior Member
 
Joined: Sep 2017
Posts: 484
Likes: 66
From: N.Y. L.I.
04 E55 AMG BLK/BLK(MyDD), 06 CLK 500 (wife's) 07 ML500, 2012 C300(son's)
Originally Posted by N_Rob
I wrapped the oil filler neck and filter cap in aluminum foil and recreated the leak. To my surprise, it was neither of those. might try wrapping the individual lines next and seeing if I can isolate it that way
OK! Good work, good plan. You'll get it. Looks like you may want to check your motor mounts as well. Staying tuned for the conclusion!

Last edited by Pmarino; 09-30-2018 at 10:41 PM.
Old 10-01-2018 | 11:54 AM
  #27  
N_Rob's Avatar
Thread Starter
Member
 
Joined: Nov 2017
Posts: 198
Likes: 20
2008 BMW M5, 2004 E55 AMG (RIP)


I found a TINY tear in the bottom of the two lines right in front of the filtercap, I’m hopeful that this is it. Looks very small for the amount of oil that came out but there is a lot of pressure up that high in the rev range I guess. Hopefully it’s visible on my phone pic.
Old 10-02-2018 | 12:02 PM
  #28  
bbirdwell's Avatar
MBWorld Fanatic!
Veteran: Army
 
Joined: Jan 2014
Posts: 3,398
Likes: 1,017
From: Republic of Texas
'99 and '05 E55 AMG
Originally Posted by N_Rob
I found a TINY tear in the bottom of the two lines right in front of the filtercap, I’m hopeful that this is it. Looks very small for the amount of oil that came out but there is a lot of pressure up that high in the rev range I guess. Hopefully it’s visible on my phone pic.
Good troubleshooting. I like the way the members of this forum assist each other. If you go with DavesMeanE's fittings and lines please take photos.
Old 10-02-2018 | 01:35 PM
  #29  
Yuille36's Avatar
MBWorld Fanatic!
Veteran: Marine Corp
 
Joined: Apr 2009
Posts: 5,995
Likes: 516
From: Alexandria, VA
07 E63 AMG, 10 C63 AMG, 07 E63 Designo, 07 E350, 09 C300, 07 C230
I had a oil leak problem earlier this year, but it came from the oil cooler return lines, the o-ring seals failed.
Most of my oil spray was contained to the engine belly pans. So not a tremendous amount of clean-up involved.
Old 10-02-2018 | 03:44 PM
  #30  
AmgAnt's Avatar
Newbie
 
Joined: Sep 2018
Posts: 6
Likes: 0
From: Maryland
2005 E55 AMG
Oh trust me that’s definitely where it’s coming from! Same exact spot as mine and about the same size tear. I took my factory lines off and had new hoses and fittings installed locally here in MD. Hopefully you can fix it soon!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Oil Geyser from Filler Cap



All times are GMT -4. The time now is 12:31 AM.