For you guys running NOS a little FYI.
I upped the Nitrous jetting this year and could not keep the tires down on a 3rd gear highway pull. So I picked up a Nitrous Xpress EZ progressive controller and it works fantastic. I have it dialed in a 2.5 seconds to full Nitrous and all is well. Highly recommend it as it is real easy to work and install. Just plug in and go !!! One of the best $130.00 I have spent lately.LOL

 

I may need to talk with you more at some point. We are building a CLK55 M113K swap. We picked up some slightly used NOS parts and bottle for it. Not doing anything yet but you could steer us straight if we have any issues.

Thanks!

 

No problem brother would love to.

 

Nice! I've played around with progressive nitrous before and it definitely helps if there's traction issues.

What jetting are you running now?

 

I have their kit to bro, best kit out there. Did you get the stand alone fuel cell for race fuel when spraying? I also went with the deep sea diving 15lb bottle lol, looks massive. Kit is very high quality.

 

Mii3 I now have it jetted for about 90-100hp . I was at 60 last year.

Craig no fuel cell as I run race fuel all the time so no need for anything extra.
Never heard back from you on doing a 3.06 gear swap for me .

 

We can do it, where are you located?

 

Connecticut

 

Would you plan to send the differential or ship the car bud?

 

Spraying gasoline before the blower isn’t an issue right? Same as meth or is gasoline going to mess up the coating?

 

Just the differential. It is all apart and cleaned right now. It would need new pinion bearings....the carrier only has 50k on it ... carrier bearings so they can stay.

 

I spray after the blower ...in the surge tanks / intake.

 

I would think that's a good idea. That's what I would do.

People have done it before and after the blower and either way gets the job done.
I don't know if spraying nitrous through the blower really does anything to damage the coating.

 

Didn't see a need to go that far before in the system. Also the temperature would be colder going through the intercooler than the water actually cooling it . Right at the base of the intake elbow is perfect. IMO