Mercedes e63 2010 issue
Thread Starter
Newbie
Joined: Apr 2024
Posts: 5
Likes: 0
Mercedes e63 2010
Mercedes e63 2010 issue
hello the issue I have Is my car goes to limp mode and attraction off I changed the padel and I changed the intake manifold also as well still facing this issue any solutions ? By the way its mercedes e63 the engine is m156
Last edited by Merce63k2010; Apr 13, 2024 at 01:07 AM.
Super Member
Joined: Feb 2007
Posts: 601
Likes: 285
From: Republic of Texas
W203 W212 W211 R53MCS
So these accelerator sensor have 2 sensors inside that have different voltages as they operate. So the engine control module is constantly checking the signals against each other. Measure the values while actuating and compare. Also make sure you have reference voltage and ground available.
Thread Starter
Newbie
Joined: Apr 2024
Posts: 5
Likes: 0
Mercedes e63 2010
So these accelerator sensor have 2 sensors inside that have different voltages as they operate. So the engine control module is constantly checking the signals against each other. Measure the values while actuating and compare. Also make sure you have reference voltage and ground available.
Thread Starter
Newbie
Joined: Apr 2024
Posts: 5
Likes: 0
Mercedes e63 2010
So these accelerator sensor have 2 sensors inside that have different voltages as they operate. So the engine control module is constantly checking the signals against each other. Measure the values while actuating and compare. Also make sure you have reference voltage and ground available.
