When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Now my main question is. can i use on the rear 285/30/20 instead of 275/30/20?
does anyone have experience with this?
my concern is because of the 4matic.
next thing is i want nothing to brush against the fender
Your front needs 18mm spacer at least to clear the suspension components. As it stands now (without any spacers), your wheel is 28mm closer to the suspension components.
Your rear can do 285/30/20 ... but It will rub already even at 275/30/20 I believe because your wheel of 10.5 inch wide will have extended it out by 28mm (without any spacers), also you are going to be 10mm closer to the suspension components. If you do a spacer, that will extend the wheel out even more which means it will rub the fender for sure.
Is there anyway you can do away with these wheels ? Your wheel shop should have done the calculation for you before you are to order them.
just my 2 cents.
Last edited by bobblehead; Feb 9, 2022 at 07:30 AM.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
