N-NICE
#1
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
N-NICE
can't wait until the moring!
#2
Senior Member
Join Date: Jun 2010
Location: Spring/Houston, TX
Posts: 273
Likes: 0
Received 1 Like
on
1 Post
CLS 55 AMG, FX45, F-350, Top Secret Widebody Supra (Sold) and other vehicles on another Planet
Heck yeah bro! I can't wait to see these on your car! Post pics as soon as you get them on!
.
.
#4
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
#6
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
ah, will make sure to record that information.....
I know that's a hot bit of info eveyone likes to get
all I know now is they're 19's with a satin finish.....
the center caps are pretty flimsy though....not sure which ones to use hehe....
my CF ones are looking kind of raggedy...but I have a few.....
I know that's a hot bit of info eveyone likes to get
all I know now is they're 19's with a satin finish.....
the center caps are pretty flimsy though....not sure which ones to use hehe....
my CF ones are looking kind of raggedy...but I have a few.....
Trending Topics
#8
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
pm sent Gsc
#9
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
a big change for me personally.....
I got pretty used to the concave look of the cv1's...
these are pretty mellow, but look great....
decided to go with the silver center caps...
and I know: everyone thinks it needs a drop...
still on the fence.........
#11
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 796 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
or you didnt go 19x11 which is the optimal rear width...
What are widths and tire set up?
P40SC's are conical in nature and they have what is called a low offset in the rear (CLS) and medium in the front (CLS) with low having the most cone like effects. From the pics it appears you have a medium offset in the rear and high in the front. But keep in mind that 19's have less diameter which inturn shows less conical effects.
Last edited by Vic55; 06-06-2012 at 10:55 PM.
#15
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
oh geez......I guess it was on purpose........
I don't know, the tire dude picked the tires:255/35 and 285/30 and the front and rear....
I think the rears are 10.5 in the back....
so what is the fix here exactly?
they look fine too me, but I'm hearing that they're not optimal.......
thanx duders!
I don't know, the tire dude picked the tires:255/35 and 285/30 and the front and rear....
I think the rears are 10.5 in the back....
so what is the fix here exactly?
they look fine too me, but I'm hearing that they're not optimal.......
thanx duders!
#16
Senior Member
oh geez......I guess it was on purpose........
I don't know, the tire dude picked the tires:255/35 and 285/30 and the front and rear....
I think the rears are 10.5 in the back....
so what is the fix here exactly?
they look fine too me, but I'm hearing that they're not optimal.......
thanx duders!
I don't know, the tire dude picked the tires:255/35 and 285/30 and the front and rear....
I think the rears are 10.5 in the back....
so what is the fix here exactly?
they look fine too me, but I'm hearing that they're not optimal.......
thanx duders!
#18
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 796 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
oh geez......I guess it was on purpose........
I don't know, the tire dude picked the tires:255/35 and 285/30 and the front and rear....
I think the rears are 10.5 in the back....
so what is the fix here exactly?
they look fine too me, but I'm hearing that they're not optimal.......
thanx duders!
I don't know, the tire dude picked the tires:255/35 and 285/30 and the front and rear....
I think the rears are 10.5 in the back....
so what is the fix here exactly?
they look fine too me, but I'm hearing that they're not optimal.......
thanx duders!
20x9 and 20x11 or 19x9 and 19x11
on 20s you would run 255x30 and 305x25 tires with a 35 rear offset and a 25 front.
19's you would run 255x35 and 305x30 with the same offsets.
This would keep your rolling diameter closest to stock. The rears are not wide enough at 10.5 but even with 10.5's you could just lower the offset by 12mm to a et23 to push out the rears. Even if you get wider tires it wont be right with your set up- you will have a ballooning effect with the rubber. The problem is with the width of the wheel and the offset. If you pull your wheel off (leave tire on) and look on the inside lip of the wheel where the tire touches the rim you will see the HRE offsets imprinted.
I just hate to use spacers on a custom made wheel that should be made perfectly for your car. I doubt HRE did these specs as they know the perfect set up. It had to be your retailer who suggested such specs.
#19
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
thanx Vic, and fella's too.....
I actually do think the retailer suggested the spec's...
but kind of unsure....
also feeling a bit silly about the whole thing.....haha....
I like the wheels and all, just want them to be 'right' you know??
thanx again for the guidence!
much needed
I actually do think the retailer suggested the spec's...
but kind of unsure....
also feeling a bit silly about the whole thing.....haha....
I like the wheels and all, just want them to be 'right' you know??
thanx again for the guidence!
much needed
#20
Member
It looks good man. Either have ur wheel guys get another set made for u with the correct specs or get some spacers. I like the wheel choice but not the fitment. See if u can get it replaced for the correct ones. U paid top dollar for HRE, it should be top dollar fitment. Ur ride deserves perfect tailored fit. Spacer would just be a waste of what u shelled out $$$ for. Have the wheel guys you used make things right.
Last edited by BenzCLS06; 06-07-2012 at 01:11 PM.
#21
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
bollocks!
so ask for another set to be made? these are not refundable....
I wouldn't even know what to say to the wheel guys....I left yesterday
with 'em on and was happy....
but the concensus here seems to be "NO"...
confused
so ask for another set to be made? these are not refundable....
I wouldn't even know what to say to the wheel guys....I left yesterday
with 'em on and was happy....
but the concensus here seems to be "NO"...
confused
#22
MBWorld Fanatic!
Optimal wheel stance is subjective
If you have nineteens and you went with stock specs then that's optimal per factory
Which is fine
They look good
but obviously whenever your go bigger than stock and do a drop it looks awesome like vics
If you have nineteens and you went with stock specs then that's optimal per factory
Which is fine
They look good
but obviously whenever your go bigger than stock and do a drop it looks awesome like vics
#23
hyperion, please email me directly at LonM@hrewheels.com
Let's talk, we want to make sure your happy before and after the purchase. I'm here to support our customers.
Let's talk, we want to make sure your happy before and after the purchase. I'm here to support our customers.
#24
Administrator
Honestly I think they look good.........and really, only the biggest wheel snob (Vic types) would even pick up that subtle difference. If it is really an issue for you, then spend $200.00 on some H&H 10mm spacers/lugs and call it a day. But if you go to that trouble, then get the KW coil-overs and drop it just a bit.
Edit: Looks like HRE to the rescue.....Nice!
Edit: Looks like HRE to the rescue.....Nice!
#25
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
thanx again you guys, and that is comforting....to know that they're good...
even though they're not optimal per say, I still do like the look,
I also hope that this particular set-up wouldn't cause any damage to the car you know?
and many thanx Lon!! I am very pleased with these and like them very much.....
guess I just have some more to learn about these things! but that's a good thing you know? I really thank you for the support
these boards are the best
kudos to the guys that can tell just from the pictures
even though they're not optimal per say, I still do like the look,
I also hope that this particular set-up wouldn't cause any damage to the car you know?
and many thanx Lon!! I am very pleased with these and like them very much.....
guess I just have some more to learn about these things! but that's a good thing you know? I really thank you for the support
these boards are the best
kudos to the guys that can tell just from the pictures
Last edited by hyperion667; 06-07-2012 at 01:50 PM.