Hubcentricity
#1
Member
Thread Starter
Hubcentricity
My monoblocks start to shimmy at about 60mph. I had them checked and they are not bent. I was told i need a hub centric adaptor. How do you make a wheel hub centric. I'm not sure how this all works. Could someone offer any suggestions.
Last edited by Adonis; 02-18-2003 at 09:27 PM.
#2
MBWorld Fanatic!
Who sold you wheels that did not have the correct Hub ring or did the hub centric ring come off? What wheels do you have?
#3
Member
Thread Starter
I have brabus monoblock v's. they didn't have hub rings on them when i bought them. I had some plastic ones installed today and the ride is a little better but i still have a slight shimmy over 60mph
#4
MBWorld Fanatic!
Join Date: Nov 2001
Location: Dallas, TX
Posts: 1,633
Likes: 0
Received 5 Likes
on
2 Posts
W212 E63, Audi R8 4.2, Panamera S, Range Rover Sport GT
brabus has changed their manufacturing, so this is a difficult question to answer, but something is wrong.
Did you check for radial runout of the wheel? sometimes a tire is out of round.
Did you check for radial runout of the wheel? sometimes a tire is out of round.
#6
TR Moderator & Tire God
Join Date: Nov 2001
Location: SouthBend, IN USA
Posts: 3,545
Likes: 0
Received 5 Likes
on
5 Posts
depends on the weather
just because they are new it doesn't mean that they can't be out-of-round .... find a shop with a GSP9700 balancer and they will be able to determine if the wheels or tires are causing your problems
#7
MBWorld Fanatic!
Originally posted by lee2375
brabus has changed their manufacturing, so this is a difficult question to answer, but something is wrong.
Did you check for radial runout of the wheel? sometimes a tire is out of round.
brabus has changed their manufacturing, so this is a difficult question to answer, but something is wrong.
Did you check for radial runout of the wheel? sometimes a tire is out of round.