Luke - Question - O.Z. Ultraleggera HLT
#27
#28
Hi Chuck, do you mind posting the specs for your wheels too? like to know what offsets you used and if you don't mind, can you post pics of how flush the wheels are with the flares of the wheel well? I like mine to sit flush and my worry is that the front's may not sit flush but may require spacers. Thanks! Can't wait to see your pics!![drive](https://mbworld.org/forums/images/smilies/driving.gif)
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
#29
Wheels installed minus the front spacers. Seems the hubs are just a tad different than the rears so the spacers I bought didn't fit. New ones to try being sent via overnight from Evosport as I type....
They turned out beautiful IMO.
![](http://www.928registry.org/DSC04497.JPG)
Lots more pics here:
https://mbworld.org/forums/sl55-amg-...ml#post3699293
They turned out beautiful IMO.
Lots more pics here:
https://mbworld.org/forums/sl55-amg-...ml#post3699293
#32
Put the front spacers on tonight thanks to the guys at Evosport, when I called with my issue they jumped right on it and I had the right spacers at 8:30am this morning. While the difference is subtle with the 10mm spacer on each side I think it made a significant difference in the stance.
![](http://www.928registry.org/DSC04583.JPG)
#33
Senior Member
Join Date: May 2004
Location: So Cal
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
04 SL 500, 09 R350, 09 E63, 2010 Prius
awsome! Thank you Chuck for sharing these awsome pics of your new toy! I think the spacers do make a difference. I have 8.5 up front too and I think it's inside the wheel well too much by around 1/2 inch. I am getting spacers in there too to make them nice, like yours! great job! Any other mods coming on this baby?
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#34
awsome! Thank you Chuck for sharing these awsome pics of your new toy! I think the spacers do make a difference. I have 8.5 up front too and I think it's inside the wheel well too much by around 1/2 inch. I am getting spacers in there too to make them nice, like yours! great job! Any other mods coming on this baby? ![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#35
Super Member
Join Date: Nov 2005
Location: Cold Snowy North
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
-
Luke, what is the offset of the 19x11 rears? 42 and/or 45?
I assume neither will clear the '04 R230 SL600 (No TPMS) without the need for spacers?
The only reason is I want to run a 305/30-19 RE11 or 305/30-19 PS2. I assume for both I will need the 11in rear and the 10in will not do correct?
Thanks
I assume neither will clear the '04 R230 SL600 (No TPMS) without the need for spacers?
The only reason is I want to run a 305/30-19 RE11 or 305/30-19 PS2. I assume for both I will need the 11in rear and the 10in will not do correct?
Thanks