carlsson 1/16 BE on w209
#1
Super Member
Thread Starter
Join Date: Jan 2004
Location: Mel/Syd/Tpe
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
GF
LUKE need your advice with carlsson 1/16 BE on w209
Hi Luke,
I have a question with carlsson 1/16 BE RIM on w209
currently I have 18/8.5 F (225/40/18) and 18/10 R (255/35/18)
from carlsson site
http://www.carlsson.de/de/raeder/uebersicht.html
the require ET for front and Rear is 28 and 29
however my current setup is with C class spacer which gives 28 and 35
My question is if I can install the Rear ET35 wheel (with C class hubcentric spacer) on the w209 Rear? The front setup is exactly same so I dont have to worry.
The Whole car is not lowered at all so I think 6mm will not make a big difference or scratch, what do you think? will it fit safely?
Thanks in advance.
I have a question with carlsson 1/16 BE RIM on w209
currently I have 18/8.5 F (225/40/18) and 18/10 R (255/35/18)
from carlsson site
http://www.carlsson.de/de/raeder/uebersicht.html
the require ET for front and Rear is 28 and 29
however my current setup is with C class spacer which gives 28 and 35
My question is if I can install the Rear ET35 wheel (with C class hubcentric spacer) on the w209 Rear? The front setup is exactly same so I dont have to worry.
The Whole car is not lowered at all so I think 6mm will not make a big difference or scratch, what do you think? will it fit safely?
Thanks in advance.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Last edited by DTMCLK; 08-09-2004 at 11:19 AM.