Mark this thread as Unsold
18x8.5/9.5 SL63 AMG reps $599 NEW from PowerWheels Pro
Super Member
Joined: Oct 2008
Posts: 861
Likes: 3
From: Fairfield county, CT.
2004 Ran SRT-10,2007 S550,2016 E400c
Just my 2 cents here..... i got a set of the c63 reps in silver in 19" on my 211 and i bought them because i drive in NYC pothole central... If i bend one i just buy a new one for 150 bucks.
I have had them on all last summer and when i m&b them the first time i was amazed they all balance perfectly and with little wieght. When i removed them for the winter i cleaned the inside and rebalanced them i was so suprised not one bend , not even alittle.
I drive normal i avoid as many potholes as poss. but i have hit a few.
In my opinion its not being cheap to buy reps.... i have a set of dpe 20" and hre20" at home when i just want to cruise around or hiy a show. its being smart with your money.
I have had them on all last summer and when i m&b them the first time i was amazed they all balance perfectly and with little wieght. When i removed them for the winter i cleaned the inside and rebalanced them i was so suprised not one bend , not even alittle.
I drive normal i avoid as many potholes as poss. but i have hit a few.
In my opinion its not being cheap to buy reps.... i have a set of dpe 20" and hre20" at home when i just want to cruise around or hiy a show. its being smart with your money.
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
Hey guys,
Sorry it took so long to respond to some of the recent posts. It seems there has been a issue of quality regarding replica wheels. We can assure everyone that our wheels will exceed expectations in terms of quality. Please visit our website and go to the 'testimonials' section. Also, as another member mentioned we offer a 2 year warranty and guaranteed fitment. Our wheels are made in an OEM factory and pass several inspections before they are shipped to our customers. The manufacturing process (low pressure casting) used to make our wheels makes them lighter than OEM wheels and stronger as well.
As for the 805 and 801 fitting the 2003 SL55, the 18" wheels will work perfectly according to our data. We have the 805 non staggered and the 801 non staggered and staggered. Please email us if interested.
Thanks,
Sorry it took so long to respond to some of the recent posts. It seems there has been a issue of quality regarding replica wheels. We can assure everyone that our wheels will exceed expectations in terms of quality. Please visit our website and go to the 'testimonials' section. Also, as another member mentioned we offer a 2 year warranty and guaranteed fitment. Our wheels are made in an OEM factory and pass several inspections before they are shipped to our customers. The manufacturing process (low pressure casting) used to make our wheels makes them lighter than OEM wheels and stronger as well.
As for the 805 and 801 fitting the 2003 SL55, the 18" wheels will work perfectly according to our data. We have the 805 non staggered and the 801 non staggered and staggered. Please email us if interested.
Thanks,
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
Hello,
We do not have the 818 in 19" we do however have the 805 in 19" as well as the 817 in 19" and the 811 in 19" staggered.
Thanks,
We do not have the 818 in 19" we do however have the 805 in 19" as well as the 817 in 19" and the 811 in 19" staggered.
Thanks,
Last edited by powerwheelspro; Feb 16, 2010 at 06:18 PM.
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Newbie
Joined: Sep 2009
Posts: 10
Likes: 0
From: Blue Bell
SL55 AMG, Z06, CT9A
INterested in the 805 but I need a staggard fitment.
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
We do have the 805 staggered but in 19"s for now.
qdsdirect, unfortunately we only have the 818 SL65s in 18x8.5, we are out of the rears.
Wish I could give you a better answer
Vassili
qdsdirect, unfortunately we only have the 818 SL65s in 18x8.5, we are out of the rears.
Wish I could give you a better answer
Vassili
Newbie
Joined: Sep 2009
Posts: 10
Likes: 0
From: Blue Bell
SL55 AMG, Z06, CT9A
I'd like to see pics of the staggard 19" 805's too. Can you also list the offset.
Do you know if they'll bolt right up to my 03 SL55 without any modifications? I tried looking on your website, but some of the fitment information is cutoff/not complete.
Do you know if they'll bolt right up to my 03 SL55 without any modifications? I tried looking on your website, but some of the fitment information is cutoff/not complete.
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
Auraraptor, we currently have the 811 and 817 in 17" and they are of comparable weight as the OEMs as they are made using the same manufacturing process, low pressure casting
Boris0126 here are the pictures of the Renntech 805 19" stag
Of the 817 SL63:
The 811s we don't have them side by side but here are a couple of close up shots:
alwaysinboost: Your R129 has an offset in the mid 20s, it will be very hard to find aftermarket replica wheels in that offset (we haven't seen any). Many of our R129 customers have used spacers to get the wheels to clear the brakes without any issues. The post 2004 SL R230 offset works with these wheels and they fit without any modifications or issues.
Thanks,
Boris0126 here are the pictures of the Renntech 805 19" stag
Of the 817 SL63:
The 811s we don't have them side by side but here are a couple of close up shots:
alwaysinboost: Your R129 has an offset in the mid 20s, it will be very hard to find aftermarket replica wheels in that offset (we haven't seen any). Many of our R129 customers have used spacers to get the wheels to clear the brakes without any issues. The post 2004 SL R230 offset works with these wheels and they fit without any modifications or issues.
Thanks,
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
Hello,
These wheels are about 29lbs front and 32lbs rear.
As for the Sl500:
We can set you up with the 255/35 and 285/30 Hankook Ventus V12's mounted and balanced for $890, the wheels are $699 and the shipping is $140 for a total of $1729.
Please contact us if you have further questions.
Thanks,
These wheels are about 29lbs front and 32lbs rear.
As for the Sl500:
We can set you up with the 255/35 and 285/30 Hankook Ventus V12's mounted and balanced for $890, the wheels are $699 and the shipping is $140 for a total of $1729.
Please contact us if you have further questions.
Thanks,
Super Member
Joined: Jun 2002
Posts: 828
Likes: 1
From: Northern VA
SL 500
Inquiry
Hi Vassili,
Sent u a PM regarding the following rim + tire package for R230 (SL500).
Let me know if it's stock and total cost out the door. Phone + Email in the PM.
Thank You
Amer
Specs:
Wheel size: 18x5 F 18x9.5 R
Bolt Pattern (PCD):5-112
Wheel Offset: +35mm
CB: 66.6
Finish: Gun Machined Face
Sent u a PM regarding the following rim + tire package for R230 (SL500).
Let me know if it's stock and total cost out the door. Phone + Email in the PM.
Thank You
Amer
Specs:
Wheel size: 18x5 F 18x9.5 R
Bolt Pattern (PCD):5-112
Wheel Offset: +35mm
CB: 66.6
Finish: Gun Machined Face
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
Hi Boris,
The plant is making the 19" wheels for us as per everyone's request. Production will be scheduled over the next few weeks. We should have them early summer. Hope the timing works for you.
Hi Amer,
Sent you an email and a pm.
Thanks guys!
Vassili
The plant is making the 19" wheels for us as per everyone's request. Production will be scheduled over the next few weeks. We should have them early summer. Hope the timing works for you.
Hi Amer,
Sent you an email and a pm.
Thanks guys!
Vassili
