Mark this thread as Unsold
18x8.5/9.5 SL63 AMG reps $599 NEW from PowerWheels Pro
03-15-2010 | 05:11 PM
#201
MBWorld Fanatic!
Joined: Jan 2004
Posts: 2,853
Likes: 1
From: Boston
CLK500/Range Rover HSE/E55 AMG/Bmw 328Xi coupe/BMW 4.8x/Bmw 335i/GS350/Audi S5/E350
03-15-2010 | 11:18 PM
#203
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
Hi x-tian-230k, here is a picture of the two sets of 814s we got in without the AMG. They are 18x8 which will clear your CLK's control arm. Please note that these will not clear the AMG brakes, you will need to run spacers for those if your car has them. The 815s will fit as well as they are 18x8.
Gpupp, unfortunately we are currently out of stock on staggered 18s. It is my understanding that you might have a hard time finding aftermarket replica wheels that are less than 35mm offset (I haven't' seen any) so you might have to consider using spacers to push them out enough to clear your brakes on your CLK55.
Please note that we are getting some more AMG staggered wheels in about 5-6 weeks. We currently have the 818s, the 808s in 18x8.5 that say AMG on them.
Thanks,
Vassili
Gpupp, unfortunately we are currently out of stock on staggered 18s. It is my understanding that you might have a hard time finding aftermarket replica wheels that are less than 35mm offset (I haven't' seen any) so you might have to consider using spacers to push them out enough to clear your brakes on your CLK55.
Please note that we are getting some more AMG staggered wheels in about 5-6 weeks. We currently have the 818s, the 808s in 18x8.5 that say AMG on them.
Thanks,
Vassili
03-16-2010 | 12:10 AM
#205
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
I understand.
I will say though, if you know what to get EXACTLY you will not have any vibration issues. We have had many happy customers with R129 (also mid 20s offset) as well as CLK AMG cars use spacers without any problems.
Specifically you will need 10mm thick 66.6 hubcentric spacers 5x112 with the lip around the hole on the outside that goes into the wheel in order to center it. That lip has to also be 66.6mm diameter to ensure there is no tolerance between the wheel, spacer and car.
Try to use well known sources and you should be golden.
Just a suggestion for your consideration. There is no reason to live with your stock wheels or have to fork out $4k for a set of wheels when you can get the job done for much much less
Cheers,
Vassili
I will say though, if you know what to get EXACTLY you will not have any vibration issues. We have had many happy customers with R129 (also mid 20s offset) as well as CLK AMG cars use spacers without any problems.
Specifically you will need 10mm thick 66.6 hubcentric spacers 5x112 with the lip around the hole on the outside that goes into the wheel in order to center it. That lip has to also be 66.6mm diameter to ensure there is no tolerance between the wheel, spacer and car.
Try to use well known sources and you should be golden.
Just a suggestion for your consideration. There is no reason to live with your stock wheels or have to fork out $4k for a set of wheels when you can get the job done for much much less
Cheers,
Vassili
03-17-2010 | 09:13 AM
#206
MBWorld Fanatic!
Joined: Jan 2004
Posts: 2,853
Likes: 1
From: Boston
CLK500/Range Rover HSE/E55 AMG/Bmw 328Xi coupe/BMW 4.8x/Bmw 335i/GS350/Audi S5/E350
I understand.
I will say though, if you know what to get EXACTLY you will not have any vibration issues. We have had many happy customers with R129 (also mid 20s offset) as well as CLK AMG cars use spacers without any problems.
Specifically you will need 10mm thick 66.6 hubcentric spacers 5x112 with the lip around the hole on the outside that goes into the wheel in order to center it. That lip has to also be 66.6mm diameter to ensure there is no tolerance between the wheel, spacer and car.
Try to use well known sources and you should be golden.
Just a suggestion for your consideration. There is no reason to live with your stock wheels or have to fork out $4k for a set of wheels when you can get the job done for much much less
Cheers,
Vassili
I will say though, if you know what to get EXACTLY you will not have any vibration issues. We have had many happy customers with R129 (also mid 20s offset) as well as CLK AMG cars use spacers without any problems.
Specifically you will need 10mm thick 66.6 hubcentric spacers 5x112 with the lip around the hole on the outside that goes into the wheel in order to center it. That lip has to also be 66.6mm diameter to ensure there is no tolerance between the wheel, spacer and car.
Try to use well known sources and you should be golden.
Just a suggestion for your consideration. There is no reason to live with your stock wheels or have to fork out $4k for a set of wheels when you can get the job done for much much less
Cheers,
Vassili
I was on your website last night and was flipping through the pictures of your customers cars. I saw a 335 cab that had M6 rims. I did not see those on your website. Did you have them before and now not sell them anymore? My brother has a 335 and wants those rims? Please let me know...
Thanks..
BTW, still debating on the 815's for my Eclass. The only thing is, they will be for my winter tires so I dont need them right now... But the question is, should I buy them now or later when I need them....
Thanks in advance!
03-17-2010 | 10:45 AM
#207
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
Hello,
I am Vassili
If you are interested in finding BMW wheels, please go to www.eurowheelspro.com, They have a great selection of BMW wheels.
As for the 815's...we are completely out of stock on them.
Sorry about that. Perhaps the 802's would work for you?
I am Vassili
If you are interested in finding BMW wheels, please go to www.eurowheelspro.com, They have a great selection of BMW wheels.
As for the 815's...we are completely out of stock on them.
Sorry about that. Perhaps the 802's would work for you?
Last edited by powerwheelspro; 03-17-2010 at 10:51 AM.
05-14-2010 | 06:10 PM
#210
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
Boris,
We just got a bunch of the 814 style in the 18x8.5" with the AMG labels.
Please contact us if you are interested.
Everyone else:
We just received 2 different designs in the staggered 18" (1885/1895)
808
811
We just got a bunch of the 814 style in the 18x8.5" with the AMG labels.
Please contact us if you are interested.
Everyone else:
We just received 2 different designs in the staggered 18" (1885/1895)
808
811
05-16-2010 | 08:20 PM
#213
Member
Joined: Nov 2008
Posts: 188
Likes: 5
w204 amg
[quote=powerwheelspro;3619805]
Item Description / Finish
This post is for one set of four SL63 replica wheels 18x8.5 and 18x9.5 with the center caps. Lug bolts not included / Chrome are available for $20 with order.
Specs:
Wheel size: 18x5 F 18x9.5 R
Bolt Pattern (PCD):5-112
Wheel Offset: +35mm
CB: 66.6
Finish: Gun Machined Face
Fitment
CL-Class W215 from 1999-2007
S-Class W140/W220 from 1991-2005
E-Class W124/W210/W211 from 1992-current
C-Class W202/W203 from 1993-2007
SLK R170/R171 from 1996 - current
CLK W208/W209 from 1997-current
SL-Class W230 from 2003-current
Guarantee
We stand behind our products 100%. We are confident our wheels are as described and will meet your highest expectations. We share the same high standards with our customers in quality, structural integrity, and finish.
We also guarantee the lowest price on the internet. This is our absolute commitment and we have gone to great lengths to maintain that lead. We will not only match, but beat any other advertised price for the same set of wheels.
Payment
Buyers can pay for their new wheels on our website at www.powerwheelspro.com with all major credit cards, or through PayPal’s secure website, checks. Please note that all orders will be shipped after payment has cleared.
Shipping
We do our best to ship each order the next business day once payment has cleared. Domestic orders are shipped via UPS. The shipment’s tracking number will be emailed to the buyer the same day they are shipped. Delivery will take from 3-6 days depending on the buyer’s location.
Shipping is a fixed $85 US dollars within the 48 continental states. Expedited shipping is available at an additional cost, depending on your location. Please email your request at support@powerwheelspro.com
International shipments: We ship all around the world! Take advantage of the undervalued $Dollar$ and buy your dream wheels from POWERWHEELS Pro! International shipment requests will be given a quote upon request and will depend upon the buyer’s location. Any related customs/duty fees are the buyer’s responsibility.
***TAKE ADVANTAGE OF OUR WORLD SHIPPING RATES***
We ship all over the world via Fedex. Due to our volume our rates are incredibly inexpensive.
Please note that the buyer is responsible for any import/customs duties
Country Charge
South Europe (France, Greece, Italy etc) $195.00
North Europe (UK, Sweden, Norway etc) $205.00
Central Europe (Austria, Germany, Holland etc) $220.00
East Europe (Poland, Slovakia, Hungary etc) $370.00
Brazil $295.00
Argentina $320.00
Mexico $150.00
Puerto Rico $150.00
Australia $250.00
New Zealand $250.00
Japan $195.00
Alternatively, we invite anyone to pick up their new wheels at our local warehouse location in Waterford, MI. Please email us for exact address. Michigan sales will be subject to 6% sales tax.
About Us
POWERWHEELS PRO is a multinational company operating in the U.S. and in Europe. Our purchasing power and high volume allows us to buy wheels at exceptionally low prices and we are excited to be in a position to pass the savings on to YOU!
We at POWERWHEELS PRO have worked hands-on with GM, Chrysler, Ford, Toyota and Honda in Automotive Quality, and we know how to live up to the toughest customer expectations. That’s why we partner with only the best wheel manufacturers and conduct routine plant inspections to bring only the best wheels to you.
We have considered and evaluated a number of wheel factories around the world looking for the best plant to meet our highest standards for:
· Best aluminum grade
· Quality finish that exceeds specifications
· Operational consistency and
· Process standardization
Our high expectations eliminated a number of factories whose production processes were unstable or not automated to the degree that ensured consistency. The obvious risks, otherwise, are production batches that vary from one to another. This would mean the possibility of one or more of your wheels being visually different or defective, perhaps with signs of chipping, hairline cracks, etc. Our commitment to quality results in a higher quality product delivered to you.
By sourcing our business only to the best and most qualified production facilities that produce OEM wheels, POWERWHEELS PRO has taken every measure to ensure that the quality and finish of your wheels is top notch. We strive for ALL wheels that come off the production line to meet the highest safety standards and customer expectations. As a quality assurance measure, ALL of our wheels exceed the world’s most demanding quality management standard: US & Europe’s ISO 9001 – ISO 9002, Japan’s demanding JWL – JWL-T and Germany’s prestigious TUV.
Stock pictures:
hi!when are you gonna have 818 in 19'?.....i read all posts and i think that thousands are waiting for this!,,,,,
i have a w204 08' and in 18' factory amg wheels come 8'front(50 ofset)-8.5 back(54 ofset)...when are 818 come with similar sizes?
are 818 TUV approved?each 818 wheel have papers that approves that point?
efxaristo poly
john
www.mbclub.gr
Item Description / Finish
This post is for one set of four SL63 replica wheels 18x8.5 and 18x9.5 with the center caps. Lug bolts not included / Chrome are available for $20 with order.
Specs:
Wheel size: 18x5 F 18x9.5 R
Bolt Pattern (PCD):5-112
Wheel Offset: +35mm
CB: 66.6
Finish: Gun Machined Face
Fitment
CL-Class W215 from 1999-2007
S-Class W140/W220 from 1991-2005
E-Class W124/W210/W211 from 1992-current
C-Class W202/W203 from 1993-2007
SLK R170/R171 from 1996 - current
CLK W208/W209 from 1997-current
SL-Class W230 from 2003-current
Guarantee
We stand behind our products 100%. We are confident our wheels are as described and will meet your highest expectations. We share the same high standards with our customers in quality, structural integrity, and finish.
We also guarantee the lowest price on the internet. This is our absolute commitment and we have gone to great lengths to maintain that lead. We will not only match, but beat any other advertised price for the same set of wheels.
Payment
Buyers can pay for their new wheels on our website at www.powerwheelspro.com with all major credit cards, or through PayPal’s secure website, checks. Please note that all orders will be shipped after payment has cleared.
Shipping
We do our best to ship each order the next business day once payment has cleared. Domestic orders are shipped via UPS. The shipment’s tracking number will be emailed to the buyer the same day they are shipped. Delivery will take from 3-6 days depending on the buyer’s location.
Shipping is a fixed $85 US dollars within the 48 continental states. Expedited shipping is available at an additional cost, depending on your location. Please email your request at support@powerwheelspro.com
International shipments: We ship all around the world! Take advantage of the undervalued $Dollar$ and buy your dream wheels from POWERWHEELS Pro! International shipment requests will be given a quote upon request and will depend upon the buyer’s location. Any related customs/duty fees are the buyer’s responsibility.
***TAKE ADVANTAGE OF OUR WORLD SHIPPING RATES***
We ship all over the world via Fedex. Due to our volume our rates are incredibly inexpensive.
Please note that the buyer is responsible for any import/customs duties
Country Charge
South Europe (France, Greece, Italy etc) $195.00
North Europe (UK, Sweden, Norway etc) $205.00
Central Europe (Austria, Germany, Holland etc) $220.00
East Europe (Poland, Slovakia, Hungary etc) $370.00
Brazil $295.00
Argentina $320.00
Mexico $150.00
Puerto Rico $150.00
Australia $250.00
New Zealand $250.00
Japan $195.00
Alternatively, we invite anyone to pick up their new wheels at our local warehouse location in Waterford, MI. Please email us for exact address. Michigan sales will be subject to 6% sales tax.
About Us
POWERWHEELS PRO is a multinational company operating in the U.S. and in Europe. Our purchasing power and high volume allows us to buy wheels at exceptionally low prices and we are excited to be in a position to pass the savings on to YOU!
We at POWERWHEELS PRO have worked hands-on with GM, Chrysler, Ford, Toyota and Honda in Automotive Quality, and we know how to live up to the toughest customer expectations. That’s why we partner with only the best wheel manufacturers and conduct routine plant inspections to bring only the best wheels to you.
We have considered and evaluated a number of wheel factories around the world looking for the best plant to meet our highest standards for:
· Best aluminum grade
· Quality finish that exceeds specifications
· Operational consistency and
· Process standardization
Our high expectations eliminated a number of factories whose production processes were unstable or not automated to the degree that ensured consistency. The obvious risks, otherwise, are production batches that vary from one to another. This would mean the possibility of one or more of your wheels being visually different or defective, perhaps with signs of chipping, hairline cracks, etc. Our commitment to quality results in a higher quality product delivered to you.
By sourcing our business only to the best and most qualified production facilities that produce OEM wheels, POWERWHEELS PRO has taken every measure to ensure that the quality and finish of your wheels is top notch. We strive for ALL wheels that come off the production line to meet the highest safety standards and customer expectations. As a quality assurance measure, ALL of our wheels exceed the world’s most demanding quality management standard: US & Europe’s ISO 9001 – ISO 9002, Japan’s demanding JWL – JWL-T and Germany’s prestigious TUV.
Stock pictures:
i have a w204 08' and in 18' factory amg wheels come 8'front(50 ofset)-8.5 back(54 ofset)...when are 818 come with similar sizes?
are 818 TUV approved?each 818 wheel have papers that approves that point?
efxaristo poly
john
www.mbclub.gr
05-19-2010 | 02:23 PM
#216
Junior Member
Joined: Sep 2009
Posts: 15
Likes: 0
2003 E500
So the pic below is an 802? Please tell me if you have staggered 18s in stock and price for chrome shipped to 78109.
James
James
Hello,
I am Vassili
If you are interested in finding BMW wheels, please go to www.eurowheelspro.com, They have a great selection of BMW wheels.
As for the 815's...we are completely out of stock on them.
Sorry about that. Perhaps the 802's would work for you?
I am Vassili
If you are interested in finding BMW wheels, please go to www.eurowheelspro.com, They have a great selection of BMW wheels.
As for the 815's...we are completely out of stock on them.
Sorry about that. Perhaps the 802's would work for you?
06-08-2010 | 12:42 AM
#217
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
Hi James,
We do have those in stock staggered, 18x8/9 35mm for $569 and shipping is $85.
supernsx,
Yes we are, that is still a few months away unfortunately, there is a new antidumping law in Europe going into effect so every wholesaler in Europe slammed the factory with orders, they had over 1 million wheels in back order.
We are getting the E63 810 that are similar in 18x8.5/9.5 44mm offset in 10 days, they will fit your W204 very nicely.
Kind regards,
Vassili
We do have those in stock staggered, 18x8/9 35mm for $569 and shipping is $85.
supernsx,
Yes we are, that is still a few months away unfortunately, there is a new antidumping law in Europe going into effect so every wholesaler in Europe slammed the factory with orders, they had over 1 million wheels in back order.
We are getting the E63 810 that are similar in 18x8.5/9.5 44mm offset in 10 days, they will fit your W204 very nicely.
Kind regards,
Vassili
Last edited by powerwheelspro; 06-08-2010 at 12:50 AM.
06-10-2010 | 06:11 PM
#221
Member
Joined: Sep 2007
Posts: 232
Likes: 0
From: nyc
c32
Hello,
I am Vassili
If you are interested in finding BMW wheels, please go to www.eurowheelspro.com, They have a great selection of BMW wheels.
As for the 815's...we are completely out of stock on them.
Sorry about that. Perhaps the 802's would work for you?
I am Vassili
If you are interested in finding BMW wheels, please go to www.eurowheelspro.com, They have a great selection of BMW wheels.
As for the 815's...we are completely out of stock on them.
Sorry about that. Perhaps the 802's would work for you?
If these "802s" are whats in teh picture.. will they fit a C32 and where can i buy????
06-11-2010 | 01:02 AM
#222
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
Yes, these are the Carlsson reps. They are available on the website www.powerwheelspro.com
They are 18x8/9 35mm and it should fit just fine.
Thanks,
Vassili
They are 18x8/9 35mm and it should fit just fine.
Thanks,
Vassili
06-11-2010 | 08:31 AM
#223
Member
Joined: Sep 2007
Posts: 232
Likes: 0
From: nyc
c32
I did look.. but couldnt find them under "mercedes" section. and would i need spacers? looking to buy asap because i have a crack in one of my stockies and got quoted 120$ to weld it, so might as well buy a new set.
BUT will these clear my c32 amg calipers without spacers?
:EDIT: nevermind.. im retarded, but will they clear my c32 calipers?
BUT will these clear my c32 amg calipers without spacers?
:EDIT: nevermind.. im retarded, but will they clear my c32 calipers?
Last edited by Benzboy13; 06-11-2010 at 08:35 AM.
06-11-2010 | 12:53 PM
#224
Thread Starter
Former Vendor of MBWorld
Joined: May 2009
Posts: 1,070
Likes: 3
E320
To tell you the truth, the AMG brakes are big and you will probably need spacers. The reason the Calsson reps work on the C class cars is because they are 18x8 and clear the control arm and shock tower, however if the brakes are too big, then you run into problems on the other side of the wheel.
Sorry about this.
Thanks,
Sorry about this.
Thanks,
