Mark this thread as Unsold
FS - 19" I-Forged Flux
09-28-2010, 08:05 PM
#2
MBWorld Fanatic!
Consider them sold if the price is right. I'll need the tires as well. Please PM me with your bottom low price and I will drive to SD with cash in hand! Thanx B!
09-28-2010, 11:38 PM
#4
MBWorld Fanatic!
Thread Starter
Picked Up - $2700 mounted and balanced, with TPMS installed.
Tires are brand new, Ventus V12 245/35-19 275/30-19
19X9 Front (2 in lip)
19X10 Rear (3 in lip)
Complete pictures in the "Build" thread. (See above)
I have had these exactly 9 1/2 hours.. Test fit one rear wheel, and just don't want to compomise my drop and I don't want to risk rolling the fenders.. Ill lose over $600 in less than 1/2 a day, but this is a great deal for someone.
Centers are Gunmetal (Close to Tectite) Brand new center caps
For anyone how wants flush.. here ya go
Tires are brand new, Ventus V12 245/35-19 275/30-19
19X9 Front (2 in lip)
19X10 Rear (3 in lip)
Complete pictures in the "Build" thread. (See above)
I have had these exactly 9 1/2 hours.. Test fit one rear wheel, and just don't want to compomise my drop and I don't want to risk rolling the fenders.. Ill lose over $600 in less than 1/2 a day, but this is a great deal for someone.
Centers are Gunmetal (Close to Tectite) Brand new center caps
For anyone how wants flush.. here ya go
09-29-2010, 03:13 PM
#6
MBWorld Fanatic!
Thread Starter
False Alarm!!!
I did some more testing in the light and with some time, and these will fit. Fronts are perfect, and the rears will need about 1/8" of help. I got in there, and it is only the inner lip that is touching. Once I am past that, I can lower it all the way to where the rim goes into the wheel well, since the lower I go, the more neg camber is present.
So I will need a very slight roll, but I will not need to bow my fender out or do anthing crazy. I took my heat gun and some random tools and played with one side, and there is no problem getting the tires in there.
I didn'y take picture of the back because I was too exited.. but here is the fronts. I think it will look sick...
So I will need a very slight roll, but I will not need to bow my fender out or do anthing crazy. I took my heat gun and some random tools and played with one side, and there is no problem getting the tires in there.
I didn'y take picture of the back because I was too exited.. but here is the fronts. I think it will look sick...
09-29-2010, 08:02 PM
#7
Former Vendor of MBWorld
Join Date: Sep 2008
Location: Bethlehem,PA
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
2005 E500 Estate Wagon
Get your rear fenders rolled man....it won't hurt anything (or I'll send you my fender roller and you can roll them yourself...its really easy).
It's always good to have your fenders rolled anyway when your slammed
!!! Slammed and Hellaflush is the ticket Bro 
It's always good to have your fenders rolled anyway when your slammed
!!! Slammed and Hellaflush is the ticket Bro
Trending Topics
09-29-2010, 08:14 PM
#8
MBWorld Fanatic!
Thread Starter
Sorry Bill.. after the wait, I wanted to peal out up and down the street. I am good now, and will be fine! Ill post up pictures when done. 
(Sometimes I get frustrated, and do crazy ****)
Why do my SS look screwed up????
(Sometimes I get frustrated, and do crazy ****)
Why do my SS look screwed up????
