MBWorld.org Forums
the front support bar, rear bracket and assembled pulley with bearing and retaining ring.
the front support bar, rear bracket and assembled pulley with bearing and retaining ring.
0 2016/08/23 04:56:14
All of the components
All of the components
0 2016/08/23 10:50:36
Detail shot of pulley
Detail shot of pulley
0 2016/08/23 10:50:47
Pulley, Rear Bracket & Support Bar
Pulley, Rear Bracket & Support Bar
0 2016/08/23 10:50:58
Side View of installed orientation
Side View of installed orientation
0 2016/08/23 10:51:06
All bolts/screws/bushings.
All bolts/screws/bushings.
0 2016/08/23 10:51:17
All of the components
All of the components
0 2016/08/23 10:53:53
Detail shot of the pulley.
Detail shot of the pulley.
0 2016/08/23 10:54:02
Pulley, Rear Bracket, Support Bar.
Pulley, Rear Bracket, Support Bar.
0 2016/08/23 10:57:19
Side view with installation orientation
Side view with installation orientation
0 2016/08/23 10:57:29
Bolts/screws/bushings.
Bolts/screws/bushings.
0 2016/08/23 10:57:54
All of the components.
All of the components.
0 2016/08/23 10:59:49
Detail shot of Pulley.
Detail shot of Pulley.
0 2016/08/23 10:59:56
Pulley, Rear Bracket, Support Bar.
Pulley, Rear Bracket, Support Bar.
0 2016/08/23 11:00:16
Bolts/screws/bushings.
Bolts/screws/bushings.
0 2016/08/23 11:00:20
All of the components.
All of the components.
0 2016/08/23 11:01:49
Detail shot of pulley.
Detail shot of pulley.
0 2016/08/23 11:01:57
Bolts/Screws/Bushings.
Bolts/Screws/Bushings.
0 2016/08/23 11:02:17
Pulley/Rear Bracket/Support Bar.
Pulley/Rear Bracket/Support Bar.
0 2016/08/23 11:02:23
Left Rear Corner
Left Rear Corner
0 2016/08/25 12:17:59
Right Rear Corner
Right Rear Corner
0 2016/08/25 12:18:09
Front Right Corner
Front Right Corner
0 2016/08/25 12:18:24
Fixed pulley installed with beltwrap kit.
Fixed pulley installed with beltwrap kit.
0 2016/11/24 11:51:02
This is the weight of the pulley before cutting the pulley grooves, so I think the weight came down to almost exactly 1lb even.
This is the weight of the pulley before cutting the pulley grooves, so I think the weight came down to almost exactly 1lb even.
0 2016/11/24 11:51:52
Final product after anodizing and laser engraving my logo.
Final product after anodizing and laser engraving my logo.
0 2016/11/24 11:53:32
The whole kit, all bolts, spacers, pulley and bracketry.
The whole kit, all bolts, spacers, pulley and bracketry.
0 2016/12/23 19:07:34
How it should look when installed on the car.
How it should look when installed on the car.
0 2016/12/23 19:08:33
Currently the only installed picture I have, I was waaayy too excited to take pictures because I wanted to drive it asap.
Currently the only installed picture I have, I was waaayy too excited to take pictures because I wanted to drive it asap.
0 2016/12/23 19:09:23
NeedsWings Dual Intake Kit with Black Teflon Coating inside and out. OEM 74mm TB at the time.
NeedsWings Dual Intake Kit with Black Teflon Coating inside and out. OEM 74mm TB at the time.
0 2017/01/19 04:48:51
Before I went FSP. This picture is on his website.
Before I went FSP. This picture is on his website.
0 2017/01/19 04:49:56
Before I went FSP. Also on the website
Before I went FSP. Also on the website
0 2017/01/19 04:50:12
Before I went FSP, also on website.
Before I went FSP, also on website.
0 2017/01/19 04:50:29
0 2017/01/20 13:35:48
Started with a regular 74mm Snout from an E55 or CLS55
Started with a regular 74mm Snout from an E55 or CLS55
0 2017/01/20 13:42:40
0 2017/01/20 13:42:52
Really quickly hacked up a paper gasket to give me a rough idea of how much welding i had to do.
Really quickly hacked up a paper gasket to give me a rough idea of how much welding i had to do.
0 2017/01/20 13:43:39
This is after many hours of welding and welding and more welding. I used about 16 filler rods of aluminum that was 1/8" diameter.
This is after many hours of welding and welding and more welding. I used about 16 filler rods of aluminum that was 1/8" diameter.
0 2017/01/20 13:44:30
This was a very quick skim cut on the mill today, some voids need to be filled, but its not done yet.
This was a very quick skim cut on the mill today, some voids need to be filled, but its not done yet.
0 2017/01/20 13:46:20
This was the same gasket and as you can see, a tonne of welding has been done and its 90% there. needs a couple more passes on the bottom and left side, but again, progress is progress. needed to see where and how much more needed to be done.
This was the same gasket and as you can see, a tonne of welding has been done and its 90% there. needs a couple more passes on the bottom and left side, but again, progress is progress. needed to see where and how much more needed to be done.
0 2017/01/20 13:46:28
In the top right area of the bore is where the gasket showed me an overlap. Weld, weld, weld! Top two threaded holes were ground out and re-filled with weld.
In the top right area of the bore is where the gasket showed me an overlap. Weld, weld, weld! Top two threaded holes were ground out and re-filled with weld.
0 2017/01/22 05:49:57