Mark this thread as Unsold
FS: AMG M113 intake manifold
Thread Starter
MBWorld Fanatic!
Joined: Feb 2004
Posts: 1,559
Likes: 0
From: Portsmouth, NH
none
FS: AMG M113 intake manifold
Entire intake manifold assambly from 98' C43. Pretty sure all the M113 V8's 430,500,55, etc.. all use this same manifold. Clean piece in working order.
-250.00-
I Also have a 2nd intake manifold that is disasembled and 3/4 ways through a port and polish job. I may part with this one if anyone is interested.
-250.00-
I Also have a 2nd intake manifold that is disasembled and 3/4 ways through a port and polish job. I may part with this one if anyone is interested.
Thread Starter
MBWorld Fanatic!
Joined: Feb 2004
Posts: 1,559
Likes: 0
From: Portsmouth, NH
none
It's an intake manifold bud, I can see if I was selling wheels....they are all the same and pretty straight forward and boring to look at.
I"ll post a pic and see if you can come up with 1000 words for it. K?
I'm selling wheel bearings too, should I grab a pic also?
I"ll post a pic and see if you can come up with 1000 words for it. K?
I'm selling wheel bearings too, should I grab a pic also?
MBWorld Fanatic!
Joined: Feb 2005
Posts: 5,761
Likes: 4
From: North Carolina
98 Black C43 , 12’ ML 350 Blutec
It's an intake manifold bud, I can see if I was selling wheels....they are all the same and pretty straight forward and boring to look at.
I"ll post a pic and see if you can come up with 1000 words for it. K?
I'm selling wheel bearings too, should I grab a pic also?
I"ll post a pic and see if you can come up with 1000 words for it. K?
I'm selling wheel bearings too, should I grab a pic also?
Thread Starter
MBWorld Fanatic!
Joined: Feb 2004
Posts: 1,559
Likes: 0
From: Portsmouth, NH
none
EDIT: Had a few ask, this isn't an air intake assembly or filter box but the actual manifold that bolts to the heads.
Location on motor
[IMG]
[/IMG]Actual part
[IMG]
[/IMG]
Last edited by NitrogenBalance; May 8, 2010 at 10:01 AM. Reason: Added Pictures
Trending Topics
Thread Starter
MBWorld Fanatic!
Joined: Feb 2004
Posts: 1,559
Likes: 0
From: Portsmouth, NH
none
Had a few ask about the manifold that has been worked on. Here are some pics, still have 1 stock untouched manifold left also.
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]
MB World Stories
The Best of Mercedes & AMG
Dubai Tuner Gives the Mercedes G-Class An Entirely New Look
Verdad Gallardo
Six Gift Ideas Your AMG Loving Dad or Grad Will Cherish
7 Craziest Things AMG Gas Ever Built
Verdad Gallardo
New Electric Mercedes-AMG GT 4-Door Coupe Unveiled: 10 Things You Need to Know
Verdad Gallardo
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
MBWorld Fanatic!
Joined: Feb 2004
Posts: 1,001
Likes: 37
From: NY
2014 E350 4Matic
Thanks for holding this as long as you did but, I managed to get a good deal on a finished ported & polished intake complete with installation relatively near to my house. While I really do like to work on my car, I have to be honest, I'm no expert and, in my case, it's almost always cheaper and faster to have a real mechanic do the job for me.
MBWorld Fanatic!
Joined: Nov 2009
Posts: 3,589
Likes: 68
From: Texas
C63 507 AMG DA Car #19
Intake
If that intake is the same as my 2004 CLK55 intake I'll take it.
Please pm a p/n so I can verify then I'll take it.
Then I can copy Mr. PTE and his bad azzzz n/a setup.
I'll probably send this off to get prof ported and then do intake and cams one weekend
...
-----
Also lmk if you have the 75% P/P intake I'd prefer to have that one.
LMK - jeff
Please pm a p/n so I can verify then I'll take it.
Then I can copy Mr. PTE and his bad azzzz n/a setup.
I'll probably send this off to get prof ported and then do intake and cams one weekend
...-----
Also lmk if you have the 75% P/P intake I'd prefer to have that one.
LMK - jeff
Last edited by betrezra; Jul 3, 2010 at 06:15 PM.
Former Vendor of MBWorld
Joined: Nov 2007
Posts: 717
Likes: 1
From: Dunellen, NJ
Chrysler Crossfire
If that intake is the same as my 2004 CLK55 intake I'll take it.
Please pm a p/n so I can verify then I'll take it.
Then I can copy Mr. PTE and his bad azzzz n/a setup.
I'll probably send this off to get prof ported and then do intake and cams one weekend...
-----
Also lmk if you have the 75% P/P intake I'd prefer to have that one.
LMK - jeff
Please pm a p/n so I can verify then I'll take it.
Then I can copy Mr. PTE and his bad azzzz n/a setup.
I'll probably send this off to get prof ported and then do intake and cams one weekend
...-----
Also lmk if you have the 75% P/P intake I'd prefer to have that one.
LMK - jeff
MBWorld Fanatic!
Joined: Nov 2009
Posts: 3,589
Likes: 68
From: Texas
C63 507 AMG DA Car #19
15hp
Here's an old thread claiming 15 hp from a p/p intake......
https://mbworld.org/forums/clk55-amg...-manifold.html
https://mbworld.org/forums/clk55-amg...-manifold.html
Senior Member
Joined: Aug 2005
Posts: 316
Likes: 0
From: Folsom Prison PA
04 Crossfire MB 5.0L M113 V8 6spd, 05 Bagged SRT6w/55K AMG V8 ,2016 C300 Sport
MBWorld Fanatic!
Joined: Nov 2009
Posts: 3,589
Likes: 68
From: Texas
C63 507 AMG DA Car #19
I bought it from Nitrogen..... and have since gone the blower route.... so this same intake is for sale by me for same price........ PM for details. Sorry for hijack Nitrogen.... but I figure you would understand 
