Mark this thread as Unsold
FS: AMG M113 intake manifold
#1
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
FS: AMG M113 intake manifold
Entire intake manifold assambly from 98' C43. Pretty sure all the M113 V8's 430,500,55, etc.. all use this same manifold. Clean piece in working order.
-250.00-
I Also have a 2nd intake manifold that is disasembled and 3/4 ways through a port and polish job. I may part with this one if anyone is interested.
-250.00-
I Also have a 2nd intake manifold that is disasembled and 3/4 ways through a port and polish job. I may part with this one if anyone is interested.
#3
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
It's an intake manifold bud, I can see if I was selling wheels....they are all the same and pretty straight forward and boring to look at.
I"ll post a pic and see if you can come up with 1000 words for it. K?
I'm selling wheel bearings too, should I grab a pic also?
I"ll post a pic and see if you can come up with 1000 words for it. K?
I'm selling wheel bearings too, should I grab a pic also?
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
#4
MBWorld Fanatic!
![](https://mbworld.org/forums/images/ranks/veteran_army.png)
It's an intake manifold bud, I can see if I was selling wheels....they are all the same and pretty straight forward and boring to look at.
I"ll post a pic and see if you can come up with 1000 words for it. K?
I'm selling wheel bearings too, should I grab a pic also?![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
I"ll post a pic and see if you can come up with 1000 words for it. K?
I'm selling wheel bearings too, should I grab a pic also?
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#5
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
EDIT: Had a few ask, this isn't an air intake assembly or filter box but the actual manifold that bolts to the heads.
Location on motor
[IMG]
![](http://i88.photobucket.com/albums/k198/nitrogenbalance/KristaDoodleHopinDimer217-1-2.jpg)
Actual part
[IMG]
![](http://i88.photobucket.com/albums/k198/nitrogenbalance/C43intake001.jpg)
Last edited by NitrogenBalance; 05-08-2010 at 10:01 AM. Reason: Added Pictures
#7
MBWorld Fanatic!
I'm very interested in the 3/4 ported and polished intake manifold. PM or email me. Also, I would need a part number to confirm that it would fit my C55.
Trending Topics
#8
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
Had a few ask about the manifold that has been worked on. Here are some pics, still have 1 stock untouched manifold left also.
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
![](http://i88.photobucket.com/albums/k198/nitrogenbalance/Parts%20Folder/Intake7.jpg)
[IMG]
![](http://i88.photobucket.com/albums/k198/nitrogenbalance/Parts%20Folder/Intake6.jpg)
[IMG]
![](http://i88.photobucket.com/albums/k198/nitrogenbalance/Parts%20Folder/Intake5.jpg)
[IMG]
![](http://i88.photobucket.com/albums/k198/nitrogenbalance/Parts%20Folder/Intake2.jpg)
[IMG]
![](http://i88.photobucket.com/albums/k198/nitrogenbalance/Parts%20Folder/Intake9.jpg)
[IMG]
![](http://i88.photobucket.com/albums/k198/nitrogenbalance/Parts%20Folder/Intake1.jpg)
#9
MBWorld Fanatic!
Thanks for holding this as long as you did but, I managed to get a good deal on a finished ported & polished intake complete with installation relatively near to my house. While I really do like to work on my car, I have to be honest, I'm no expert and, in my case, it's almost always cheaper and faster to have a real mechanic do the job for me.
#10
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
No sweat! I'd rather see it get used than become a work bench dust collector
It will find a home if not here eventually on my rebuild when its done in 2020.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#13
MBWorld Fanatic!
Join Date: Nov 2009
Location: Texas
Posts: 3,589
Received 68 Likes
on
44 Posts
C63 507 AMG DA Car #19
Intake
If that intake is the same as my 2004 CLK55 intake I'll take it.
Please pm a p/n so I can verify then I'll take it.
Then I can copy Mr. PTE and his bad azzzz n/a setup.
I'll probably send this off to get prof ported and then do intake and cams one weekend
...
-----
Also lmk if you have the 75% P/P intake I'd prefer to have that one.
LMK - jeff
Please pm a p/n so I can verify then I'll take it.
Then I can copy Mr. PTE and his bad azzzz n/a setup.
I'll probably send this off to get prof ported and then do intake and cams one weekend
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
-----
Also lmk if you have the 75% P/P intake I'd prefer to have that one.
LMK - jeff
Last edited by betrezra; 07-03-2010 at 06:15 PM.
#14
Former Vendor of MBWorld
Join Date: Nov 2007
Location: Dunellen, NJ
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
Chrysler Crossfire
If that intake is the same as my 2004 CLK55 intake I'll take it.
Please pm a p/n so I can verify then I'll take it.
Then I can copy Mr. PTE and his bad azzzz n/a setup.
I'll probably send this off to get prof ported and then do intake and cams one weekend
...
-----
Also lmk if you have the 75% P/P intake I'd prefer to have that one.
LMK - jeff
Please pm a p/n so I can verify then I'll take it.
Then I can copy Mr. PTE and his bad azzzz n/a setup.
I'll probably send this off to get prof ported and then do intake and cams one weekend
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
-----
Also lmk if you have the 75% P/P intake I'd prefer to have that one.
LMK - jeff
#15
MBWorld Fanatic!
Join Date: Nov 2009
Location: Texas
Posts: 3,589
Received 68 Likes
on
44 Posts
C63 507 AMG DA Car #19
15hp
Here's an old thread claiming 15 hp from a p/p intake......
https://mbworld.org/forums/clk55-amg...-manifold.html
https://mbworld.org/forums/clk55-amg...-manifold.html
#16
Senior Member
Join Date: Aug 2005
Location: Folsom Prison PA
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
04 Crossfire MB 5.0L M113 V8 6spd, 05 Bagged SRT6w/55K AMG V8 ,2016 C300 Sport
#17
MBWorld Fanatic!
Join Date: Nov 2009
Location: Texas
Posts: 3,589
Received 68 Likes
on
44 Posts
C63 507 AMG DA Car #19
I bought it from Nitrogen..... and have since gone the blower route.... so this same intake is for sale by me for same price........ PM for details. Sorry for hijack Nitrogen.... but I figure you would understand
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)