Wheel offset: ET 45 Rear??
#1
Super Member
Thread Starter
Wheel offset: ET 45 Rear??
Would a 19x9.5 with ET 45 work for the rear wheel?
#2
A 265 rear tire on this will is 14mm pushed out from OEM. It should be OK if you aren't lowered. On my car with OEM wheels and 265 tires, I can tell you I don't have 14mm to the fender.
#4
Super Member
Thread Starter
ET50 seems to be what everyone says. So ET45 would push the wheel out another 5mm right? My car is a non lowered P30. I was looking at some of these 19" AMG replicas and they are saying the 19x9.5 ET45 will fit the C63?
#7
Super Member
Thread Starter
Are you lowered and what size tire are you running?
I was looking at Conti DWS and Hankook V12s
I was looking at Conti DWS and Hankook V12s
Trending Topics
#8
MBWorld Fanatic!
I was running 265 Hankook EVO V12's before the Michelins and had good clearance, no rubbing whatsoever.
#9
Super Member
Thread Starter
Im non lowered P30, so I might be lower then stock C63 my a small amount.
I was looking at the DWS tires as I was told they will last the longest.
I was looking at the DWS tires as I was told they will last the longest.
#10
Super Member
Join Date: Feb 2008
Location: Los Angeles
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
2011 C63 AMG
I am i the process of ordering the SLS replicas from Power Wheel Pros. It is a 19x9.5 et45 rear but am having it machined to an et48 after posting on the forum and getting input about et45. Plan to run a 265 tire and keep the suspension stock, would like to run a 275 but not sure. Good luck and keep us posted