Vacuum line location?
#1
Senior Member
Thread Starter
Join Date: Sep 2010
Location: BayArea, CA
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
2013 C63 AMG
Vacuum line location?
Installing the valvetronic hardware/wiring for my new exhaust. Could anyone possibly post a picture of a good vacuum line to tap into? Not sure what I'm looking for exactly. And as for tapping into this, can I just cut it, and insert a t-valve in between the hoses?
Even better would be anyone with an AgencyPower exhaust that could post some clear photos of where/how the vacuum line and such were installed. Would appreciate any help on this. Thanks!
Even better would be anyone with an AgencyPower exhaust that could post some clear photos of where/how the vacuum line and such were installed. Would appreciate any help on this. Thanks!
#2
Senior Member
Thread Starter
Join Date: Sep 2010
Location: BayArea, CA
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
2013 C63 AMG
Again, no one has ANY info that might be helpful? I'm kind of shocked that the last two posts I've made regarding this exhaust install have gone unanswered. I know other members here have agency power exhausts. I know SOMEONE has to know where a vacuum line is on our cars
#4
Senior Member
Thread Starter
Join Date: Sep 2010
Location: BayArea, CA
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
2013 C63 AMG
#5
Former Vendor of MBWorld
True, that doesn't help much. My tech is telling me he t'd into the line for the Evap system that is in that location.
#6
Senior Member
Thread Starter
Join Date: Sep 2010
Location: BayArea, CA
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
2013 C63 AMG
When you're talking to a non-mechanic that information still doesn't help much, haha. I was able to figure out which one to tap into though. Taking plenty of pics right now to create an install guide
#7
MBWorld Fanatic!
at the bottom right of the red circle, do you see the solenoid valve? this is the purge valve. tap into it between the motor and the valve (you should see an arrow on the valve that points to the engine and says "mot" or "motor". This is the side you want. If you t- into the other side it'll be on the fuel tank side which will probably cause all sorts of b.s. purge leak evap codes and have your exhaust not working correctly.
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Sep 2010
Location: BayArea, CA
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
2013 C63 AMG
at the bottom right of the red circle, do you see the solenoid valve? this is the purge valve. tap into it between the motor and the valve (you should see an arrow on the valve that points to the engine and says "mot" or "motor". This is the side you want. If you t- into the other side it'll be on the fuel tank side which will probably cause all sorts of b.s. purge leak evap codes and have your exhaust not working correctly.
#10
Senior Member
Thread Starter
Join Date: Sep 2010
Location: BayArea, CA
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
2013 C63 AMG
#12
Bringing this back from the dead. There isn't much content on this subject. Any chance Vivid could post that picture here? Not much in the way of how to install this exhaust and AP's install doc is without pictures.
#15
Where is the evap line
can you post pictures? Trying to find the evap line myself! Thanks