heater will not work any suggestions
11-19-2009, 05:31 PM
#1
Newbie
Thread Starter
Join Date: Oct 2009
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
1987 300e
heater will not work any suggestions
i have a 1987 300e no heat or air you can turn the temp wheel and it will click and bush the buttons and they will make a clicking sound thats all the fan will not come on how can i check the fan to see if it will work i have read one on page there is a wire next to the fuse box the only one i have is a plug for the power windows any suggestions thanks
11-20-2009, 12:50 PM
#2
Newbie
Join Date: Aug 2009
Location: Pacific Northwest
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
1991, 300te 4matic
I am sure you have checked your fuses, how about your strip fuse? A new strip fuse might fix it for the short term, then try to find out why it blew.
11-20-2009, 02:33 PM
#3
http://en.wikipedia.org/wiki/Run-on_sentence
--
All serious...So the fan does not work at all? There is a separate fuse for the blower motor outside the fuse box. If all the fuses are fine, the regulator or the motor itself could be dead. Its semi-common and a somewhat big job to replace.
--
All serious...So the fan does not work at all? There is a separate fuse for the blower motor outside the fuse box. If all the fuses are fine, the regulator or the motor itself could be dead. Its semi-common and a somewhat big job to replace.
11-20-2009, 03:21 PM
#4
Newbie
Thread Starter
Join Date: Oct 2009
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
1987 300e
11-20-2009, 03:26 PM
#5
Newbie
Thread Starter
Join Date: Oct 2009
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
1987 300e
http://en.wikipedia.org/wiki/Run-on_sentence
--
All serious...So the fan does not work at all? There is a separate fuse for the blower motor outside the fuse box. If all the fuses are fine, the regulator or the motor itself could be dead. Its semi-common and a somewhat big job to replace.
--
All serious...So the fan does not work at all? There is a separate fuse for the blower motor outside the fuse box. If all the fuses are fine, the regulator or the motor itself could be dead. Its semi-common and a somewhat big job to replace.
ho heat
11-25-2009, 06:33 PM
#7
Newbie
Thread Starter
Join Date: Oct 2009
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
1987 300e
no heat
Trending Topics
11-26-2009, 08:02 AM
#9
Newbie
Thread Starter
Join Date: Oct 2009
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
1987 300e
06-24-2010, 04:50 PM
#13
Newbie
Join Date: Jun 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
260e
Thank you ps2cho, If there is power on both sides of that fuse does that go directly to the blower motor or then on to the switch inside? How can I troubleshoot the motor without taking it out?
01-01-2011, 01:49 AM
#15
Newbie
Join Date: Jan 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
1987 260E Base
260E Heater Problem!
Has anyone had this happen? My heater stop working all to gether like somone pulled the fuse out, no power to the controls, buttons, fan, nothing. The car will warm up and then a """Click""" sound under the dash will happen about 5 times then the heater may or may not come on. When it does come on, it works great, no problems. All fuses are good! Blower motor good! Core gets hot! I;m at a lose!!!! Please help?
