Kenwood mobile entertainment installed on my C32..
1. Kenwood DNX7100+Bluetooth device+rearview camera+Ipod cable ($1150 shipped Ebay High rank seller)
2. Kenwood mono amp for sub (1/2/4 ohms) KAC-9103D+Kenwood Excelon 4 channel amp (2/4 ohms) for door speakers+4 gauge amp kit(1) ($370 shipped Amazon.com)
3. Wiring harness Metra 70-9401 1994-05 BENZ LAND ROVER WIRE HARNESS ($16.94 Ebay shipped)
4. Metra 40-VW10 Volkswagon Antenna Adapter Euro Ford NEW ($6.75 shipped Ebay)
5. BRAND NEW PAC SWI-CAN STEERING WHEEL ADAPTER/INTERFACE ($49.98 Ebay shipped)---still not installed
6. 2 20 Ft Tsunami RCA Cable Interconnect 4 Amp ($18.80 shipped Ebay)
7. 1 PIONEER PREMIER TS-W2501D4 SPL 10 CAR SUBWOOFER SUB NEW ($122.49 shipped Ebay)----not installed
8. 1 NEW PAC SWI-JACK UNIVERSAL STEERING WHEEL CONTROL ($45.68 shipped Ebay)----not installed yet
9. Metra install kit MBK100C ($15 shipped a company named Ambient)
10. Add another $300 approx spent on installing via audio shop
I retained the use of the OEM door speakers(I do plan to replace eventually) and sub but by accident the volume was to high and blew the sub so ordered a way better replacement. 1. Bose Amp was removed (for sale look in the classifieds) 2. OEM CD changer removed (for sale in classifieds) and 3. a DVD player removed. Basically took 20lbs off the front axles since I added a Uptima battery and put about 22 lbs to the rear axles since Amps are located in trunk. The Pioneer Premier SPL 10" Sub I am installing will add approximately another 29lbs with ported enclosure but will be removable so track days aren't hindered much. I think I took out 15+lbs by removing those three items but added more due to all the additional devices and wires like the Amp kit and RCA wires. All in all I will miss the use of the OEM voice comand and the telephone answer/hangup buttons on the steering wheel but this is soooo much better. I connect the Ipod and automatically it plays my list...I wanted to add a TV tuner but waiting til they make digital TV tuners instead. Rearview camera works flawlessly in reverse. I do think the OEM door speakers sound cleaner/better but need to get upgrade eventually. BT works great so far it connects to my Iphone no issues.
Trending Topics
The interface between the factory head and the amp is fiber....then the amp goes to the speakers with regular speaker wire....
The Best of Mercedes & AMG
The interface between the factory head and the amp is fiber....then the amp goes to the speakers with regular speaker wire....
gay..i wish i knew that before. all the other threads i found said you have to replaced all the speakers if you replace the headunit.
o well, i guess i'll just enjoy my infinitiy speakers.
So it remains uninstalled til I get a solution...but its suppose to control volume and track selection and source...
I have the 10" Pioneer Prenier sub installed in ported enclosure and the Sterring wheel controls installed(thanks Jake). I have a usb port in the back of the HU so I added a M to F 6' extension so I can use either the Ipod cable or a thumb drive(flash drive). I an able to play DivX movies so thanks to the sharing website. This HU lets me upload up to three pics of my choosing and use it as a screen saver
Last edited by c32used; Mar 28, 2008 at 08:42 PM.
Everything turned out very nice
Thanks again Jake! The SWI-JACK is working flawlessly now thanks for the countless times you had to un-install it and install it as well as programed it. The item I said I got you and Jerry is in so you guys will get it on April 12th.

I have to tune Jake's C32, Brett's C32, Alan's C32, Perry's C32, Eugene C55, Kirk's SRT6, and my car again before the meet....one more won't hurt.






