Got into secret menu on 2004 BUT....
#1
Member
Thread Starter
Join Date: Jun 2004
Location: Orange County
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
2004 W211 - 2004 MV Agusta SPR
Got into secret menu on 2004 BUT....
Hey guys it was tricky but I actually was able to get into the secret menu on my 2004, changed it to AMG 211 (shows AMG logo at startup) but now I can't seem to access the secret menu again...tried 3-5-7 but no go?
Maybe its press 3 first, then 5, then 7, and hold down all at once or is it hold ALL 3 buttons down at the same time?
Maybe its press 3 first, then 5, then 7, and hold down all at once or is it hold ALL 3 buttons down at the same time?
#2
Originally Posted by outtadaloop
Hey guys it was tricky but I actually was able to get into the secret menu on my 2004, changed it to AMG 211 (shows AMG logo at startup) but now I can't seem to access the secret menu again...tried 3-5-7 but no go?
Maybe its press 3 first, then 5, then 7, and hold down all at once or is it hold ALL 3 buttons down at the same time?
Maybe its press 3 first, then 5, then 7, and hold down all at once or is it hold ALL 3 buttons down at the same time?
#3
MBWorld Fanatic!
Originally Posted by MadManAboutTown
I've tried many times, but no luck so far
outta on mine i do all of them at once, but going one by one might work too. GL
#4
Super Member
Join Date: May 2003
Location: Chicago Western Burbs
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
'06 SL65
Was playing around with it today and finally got it to work on my '04. Try this....Press the buttons in this sequence (not all at once)....Press "5" then "3" then "7". While pressing these buttons....leave them down. When I finally got in....I selected the 211 US and also the 211 ECE but when I got out of the menu....it switched back to 211 USA. Before I turned off the car, I apparently left it on 211 AMG US and when I started up the car right now....the AMG LOGO showed (like yours). Apparently on some units, you need to turn it off for a short time before it will reboot to the settings you designated (per levind post). I now set it to 211 US and 211 ECE and going to start it up in an hour and see if it plays DVD.
Last edited by LIONHEAD; 09-11-2004 at 12:42 AM.
#7
Almost a Member!
Join Date: Feb 2004
Location: OUTSIDE PHILLY/bucks county
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
e500 4matic
tried it today and got right into "secret menu".....i switched it as stated, shut er down for 15 minutes and restarted car. dvd installed, and .........cd error was all i got! next i shut it down again and couldnt get back into secret menu.
others have stated that voice changed on nav system, but not here. in addition, cd error has popped up 2x on screen today and i wasnt even listening, nor was one installed.............oh well , mine is a 2004 with late feb build date...............will try again
others have stated that voice changed on nav system, but not here. in addition, cd error has popped up 2x on screen today and i wasnt even listening, nor was one installed.............oh well , mine is a 2004 with late feb build date...............will try again
Trending Topics
#8
Super Member
Join Date: May 2003
Location: Chicago Western Burbs
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
'06 SL65
Same here......the Nav has the same voice and the DVD doesn't work. Looks like the only thing that I can change is the "AMG" Logo during start up.
#9
MBWorld Fanatic!
Join Date: May 2003
Location: Northern NJ
Posts: 1,348
Received 0 Likes
on
0 Posts
2014 BMW 550i
Same for me. I was able to get in again, and saw that it was already on ECE from the last time that I changed it, but none of the changes as expected, and that was after having the car off for many hours.
I even went ahead and pulled the fuses for the COMAND and good ole fuse 6 for good measure, hoping that it would force it reset itself, but no dice. Mine is an early build 04, so I was hoping that I might have squeeked in with the last remaining units.
Never have I actually wanted the head unit to break so much more than now, so that they would have to replace it with an 05.
I even went ahead and pulled the fuses for the COMAND and good ole fuse 6 for good measure, hoping that it would force it reset itself, but no dice. Mine is an early build 04, so I was hoping that I might have squeeked in with the last remaining units.
Never have I actually wanted the head unit to break so much more than now, so that they would have to replace it with an 05.
#11
MBWorld Fanatic!
lion, it didnt work because you didnt change the model. as stated before, it will only work if the model changes to ECE, and it doesnt matter about the keyboard. GL
#12
MBWorld Fanatic!
Join Date: Dec 2002
Location: Irvine, CA
Posts: 2,399
Likes: 0
Received 1 Like
on
1 Post
07 M6, 05 Noble, 01 S4, Smart ForTwo
I tired it, worked. "5,3,7". However, I was only able to change the keyboard to ECE, as only US selsectins were avaiable for model So I selected AMG for the hell of it. I wonder if I get an update if it will allow me to get ECE for the model also. They replaced my entire COMAND system a few months ago, maybe its a different version.
#13
MBWorld Fanatic!
Originally Posted by Brav
I tired it, worked. "5,3,7". However, I was only able to change the keyboard to ECE, as only US selsectins were avaiable for model So I selected AMG for the hell of it. I wonder if I get an update if it will allow me to get ECE for the model also. They replaced my entire COMAND system a few months ago, maybe its a different version.
Hey, if you update your software, it probably wont work because compared to an 04 and 03, the 04's are more updated. so in this case, he less updated, which are 03 with no updates suppoesedly have the option to play video. thats what it seems like. GL though
#15
MBWorld Fanatic!
Originally Posted by Brav
All I really want for now is RDS. With a prayer, MP3 ability. Maybe 05 software?
prolly not, because i think 04, and 05 are the same. i think you can order a euro command and get rds with that. GL with it.
#17
Super Member
Join Date: Feb 2004
Location: Charlotte, NC
Posts: 942
Received 0 Likes
on
0 Posts
'16 528i MSport
I can get into the menu anytime now. Thats the great part so far. I converted it to W211_US and w211_ECE for the kayboard and shut it down for a couple of minutes and went back into the menu. It was still at those settings but the DVD didn't work. Got the CD error again and again. I'm going to leave it over night and let the settings marinate and hopefuly 2moro, I'll have better results.
For those who have gotten the DVD player to work, USA reponses only, have you guys tried burned DVDs?
For those who have gotten the DVD player to work, USA reponses only, have you guys tried burned DVDs?
#18
MBWorld Fanatic!
Join Date: Dec 2002
Location: Irvine, CA
Posts: 2,399
Likes: 0
Received 1 Like
on
1 Post
07 M6, 05 Noble, 01 S4, Smart ForTwo
Originally Posted by DaCeptak0n
I can get into the menu anytime now. Thats the great part so far. I converted it to W211_US and w211_ECE for the kayboard and shut it down for a couple of minutes and went back into the menu. It was still at those settings but the DVD didn't work. Got the CD error again and again. I'm going to leave it over night and let the settings marinate and hopefuly 2moro, I'll have better results.
For those who have gotten the DVD player to work, USA reponses only, have you guys tried burned DVDs?
For those who have gotten the DVD player to work, USA reponses only, have you guys tried burned DVDs?
#19
Almost a Member!
Join Date: May 2003
Location: Elm Grove, Wisconsin
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
'07 ML320 CDI,'05 320 CDI; '01 S430,'98 VITO 110D
How to get the DVD to run?
undefinedundefined I have '05 320 CDI ED, June production. I can get to the menu every time I am in CDC, pressing 5 then 3 then 7 and then I hold them all for about 5 sec. Menu comes up, I can change to anything in each Keypad and Model menus. DVD goes in, unit loads and 5 sec later CD error.
Now, how to get the DVD to run?
Now, how to get the DVD to run?
#20
MBWorld Fanatic!
Join Date: Dec 2002
Location: Irvine, CA
Posts: 2,399
Likes: 0
Received 1 Like
on
1 Post
07 M6, 05 Noble, 01 S4, Smart ForTwo
Originally Posted by niunio
undefinedundefined I have '05 320 CDI ED, June production. I can get to the menu every time I am in CDC, pressing 5 then 3 then 7 and then I hold them all for about 5 sec. Menu comes up, I can change to anything in each Keypad and Model menus. DVD goes in, unit loads and 5 sec later CD error.
Now, how to get the DVD to run?
Now, how to get the DVD to run?
#21
Super Member
Join Date: May 2003
Location: Chicago Western Burbs
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
'06 SL65
Originally Posted by bmms8
lion, it didnt work because you didnt change the model. as stated before, it will only work if the model changes to ECE, and it doesnt matter about the keyboard. GL
#22
Almost a Member!
Join Date: May 2003
Location: Elm Grove, Wisconsin
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
'07 ML320 CDI,'05 320 CDI; '01 S430,'98 VITO 110D
Originally Posted by Brav
Put on a chicken suit, stand on your head, and pee into a coke bottle. then it will work...
#24
MBWorld Fanatic!
i dont mean to by rude, but i dont think ppl are reading this thread, and the others to figure out what units will work, and which wont, this is basicly a breakdown
03=work
04,05=dont work
GL
03=work
04,05=dont work
GL