Auxilliary wire for comand
you just need to add 4 wires to the C2 connectors.or you can get the C2 wiring harness from the dealer.
Can U post the part number (or PM me), i'll add it to my document.
BTW, Im not sure what you mean by the "output is bare naked", the wires connect to C2. In fact, on a CLK (W208), they connect to a 4 way connector, which is then connected to the aux input in the glovebox.
Probably easy to just buy a 3.5mm socket and connect up the cables yourself
Cheers
Richard
I don't know the part # for the wiring harness but i know the part # for the contact pins ,I just used regular wire.There's a correction on your documentary the speed sensor should be put on C2 #6 not #15.
Trending Topics
The Best of Mercedes & AMG
(www.ibex.co.uk/mbstuff)
R
I updated my document , pins are described there (just added the aux input pin id's)
(www.ibex.co.uk/mbstuff)
R
Thanks Richard! Question about that though... Since there are no pictures on your site, could you tell me how the pins are numbered in the picture?
R



