DeutscheM

Hey all

anyone has installation instructions for : http://www.kabeldaviko.de/w211-219.html

I really appreciate it!

BR

Diesel Benz

Are you from Germany? If you were from the US, you should not need this harness.

But if you have an Audio 20 CD head unit, this seems to be the necessary set.

But if you do have an Audio 20 CD, shouldn't you consider this other option and an NTG2.5 Comand:
http://www.kabeldaviko.de/w211-219_comm-2-5.html

The installation instructions should not be much more than finding the way to route the cable from the front to the trunk.

DeutscheM

nope i am not from Germany but close enough

What i have is a US spec E500 with Audio50...i need to install aftertmarket HU and i am having a headache trying to figure out all the wires and the radio antenna and how to power it

any insight?

Diesel Benz

If you have a US Audio 50, you should have the AGW at the trunk, including the FM/AM tuner and the amplifier.

It is not straightforward to install any after market unit in this case. You would have to find a way to power the antenna amplifier and you would need to wired speakers from the front to the rear (where some would come back) and you would lose all devices on the fibre ring.

DeutscheM

thanks for the reply

I dont care about all the devices at the fiberring!! the CDC, HU, Teleaid and phone devices are all going OUT

i am also aware of all the wires i need to run to the front and back
BUT
can you please help me out in figuring out a way to power the antenna amplifier?
i would REALLY appreciate it


BR

UK-C200

Trivial, but you still have to run the wire. Block B, pin 7 on the NGT2.5 harness.

DeutscheM

thanks UK-C200....do you know that pin correspondes to which pin in the AWG?

DeutscheM

bump

Diesel Benz

Connector 5a, pin 1, yellow wire.