SUNILP

Any news if the siemens s66 works on the s65 cradle or not?

VBD

Sunman, sorry to hijack your thread but I assume that if you are asking about the S66 then you have the cradle for the S65 and the UHI. If so could you please tell me the part numbers for the UHI and the Cradle for the S65?

Also when upgrading my W209 from the previous Nokia 6310i, are these the only parts that need upgrading, and if not, do you or does anyone else know what else is required?

Cheers

SUNILP

you need a PSE, cradle clip, cradle floor plate, custom made harness adapter crimped onto cradle clip

SUNILP

you need a PSE, cradle clip, cradle floor plate, custom made harness adapter crimped onto cradle clip

SUNILP

Hey Scorchie, how about an update now? I know all cingular dealers have the phone now. And you have the cradle. How about mating them?

scorchie

How can you know that all Cingular dealers have them? Have you checked all the dealers? Mine doesn't have them (except for the two they are holding for me, that they had to get from outside of the Bay Area because they aren't being rolled out in this area yet).

As an added bonus, I also am getting a C56 to test, which will let us know how the x55 cradle works with x56 models!

-s-

SUNILP

ehehehe. Ok, I did not check all dealers but I assumed that and I assumed wrong. Anyway, let me know when you get back to test. If you can't, send the cradle to me and I can test.

scorchie

I am up at the blindingly early hour of 8:30am so that I can make my 9:00am appointment at the AT&T store. I should have a report back shortly.

-s-

t-bone

Thanks for your efforts scorchie. I'm anxious for a response too.

SUNILP

whoo hooo! Crossing my fingers.

scorchie

Initial reports are not good... but I will keep you posted when I do some stuff. I may concentrate on the 6230B for a little while first.

So keep getting T637s.

-s-

SUNILP

Crap