Coupe and AMG Door pins
this is the picture

and, i buy from ebay (cks performace UK)
I forgot how to remove the original one, i think its anti clockwise. you have to be patient cause the original door pin are long.
Are you able to confirm exactly how you got the originals off, I've tried to unscrew mine and they wouldn't budge
I didn't want to apply too much pressure in fear of something breaking.That would be a great help TIA
Ok, I will try it in 5min. I will let you know ASAP.
Im back hehhehehe
You have to use pliers and towel so it dont brake. twist it anticlockwise to loosen up.

Last edited by paleface; May 7, 2012 at 11:53 PM.
Trending Topics
The Best of Mercedes & AMG

Mine came in a 4 pack including those for the back doors on a sedan.
They are a shorter length, but AFAIK will work just fine on the front doors, so maybe I could pass them on if interested if or when we have a Melb. meet.
These are the ones I purchased DL250

http://www.ebay.com/itm/170726156320...U:3160&vxp=mtr
They are 70.00 CDN EACH, yes EACH.
Here in Canada at my MB dealership, M-B Burlington. I think the OEM ones are made of stainless steel, cause they are pretty heavy.
Like a dumb ***, I bought two of them

But they do look good once installed.
Two

Mine came in a 4 pack including those for the back doors on a sedan.
They are a shorter length, but AFAIK will work just fine on the front doors, so maybe I could pass them on if interested if or when we have a Melb. meet.
These are the ones I purchased DL250

http://www.ebay.com/itm/170726156320...U:3160&vxp=mtr
Any pics of them on. This is the first thing i want to replace on my car! I cant stand how cheap and nasty the OEM ones look!

You can also refer to the link I posted for pics of the pins on there own, I will put up a pic or 2 of mine sometime over the weekend.
The ones I've got are solid aluminium, brushed finished sides with polished top dome and AMG lettering - your right they do look a whole lot better than OEM and even though they're so small they are easily visible and stand out compared to the plastic black units

Also if you have brushed aluminium trims on your interior they match perfectly and really do make the door interior look heaps better

I installed mine at the same top finish level as the stock OEM pins which is almost flush to the higher or outer side of the door trim ring and about 2mm or so higher than the lower or inner side of the door trim

Mine came in a 4 pack including those for the back doors on a sedan.
They are a shorter length, but AFAIK will work just fine on the front doors, so maybe I could pass them on if interested if or when we have a Melb. meet.
These are the ones I purchased DL250

http://www.ebay.com/itm/170726156320...U:3160&vxp=mtr
I have ordered them through my dealer for installation in the coming weeks before delivery and I think it'll add a nice touch.
I have ordered them through my dealer for installation in the coming weeks before delivery and I think it'll add a nice touch.

I'm not totally repulsed by the OEM units LOL, IMO they look ok it's just that the metal AMG units look a whole lot better and make a nice match to all the other similar finished bits in the interior

Mine came in a 4 pack including those for the back doors on a sedan.
They are a shorter length, but AFAIK will work just fine on the front doors, so maybe I could pass them on if interested if or when we have a Melb. meet.
These are the ones I purchased DL250

http://www.ebay.com/itm/170726156320...U:3160&vxp=mtr

If you do get them just beware that when installing make sure you start off the thread properly or with any miss-alignment they'll become awefully hard to screw in, they should screw in easily by hand without having to use plyers





