W203/CL203 Suspension (Shocks/Springs/Sway Bars) Discussion/Upgrade Thread

I'll do my best to keep everybody posted with my TEIN thread.
The Carlsson, KW V2's and Bilstein PSS9 fully adjustables have been proven.
No matter what, it always comes down to how much you have or want to spend.

Carlos

Saprissa@aol.com
K&R?

flip
Go KW and don't look back! -shameless plug.
The Best of Mercedes & AMG
flip
Here's the link:
LINK: KLEEMAN SPEED SENSITIVE SUSPENSION
Also there are the Basic coilovers available. As of right now, this is only for the 240/320/C32. I'm finishing up R&D for the TEIN S-Tech sport springs at the end of next week and they might possibly do fitment testing for the current Super Street application for my 230 k SS.
Here's the link:
LINK: TEIN Coilovers
"depends on which company and what springs you're talking about"
Okay, that makes sense. As i have read and noticed contridicting things on the coupe and sedan being the same. Certain sites show differnt part numbers, others show the same part numbers.
"depends on which company and what springs you're talking about"
Okay, that makes sense. As i have read and noticed contridicting things on the coupe and sedan being the same. Certain sites show differnt part numbers, others show the same part numbers.
Miles: 69K miles going kinda strong
Suspension: H&R Coilovers at its LOWEST setting in the front
Rear Pad: #2
Spacers: 10mm in the FRONTto clear strut
Wheels: HRE 841 19x8.5/10
Tires: Toyo 235/35/19 & 265/30/19
Comments: No rubbing since I switched over to the Toyo's, best mod I have done in a while. Only problems of course is that the underbody does rub if it's an extreme dip or LARGE speed bumps. Ride is better than my previous set up IF my tires and alignment is proper. If it is not proper I do feel vibration(caused by the use of spacers)at the steering wheel.
:-)

Man, this is coming from the same company that wanted to put 20mm spacers on a set of Brabus replicas to clear my front brakes... Guess I'm not going there.
Man, this is coming from the same company that wanted to put 20mm spacers on a set of Brabus replicas to clear my front brakes... Guess I'm not going there.








