Swapping Hood problem
STOP ! if you grind them to a circle, you will NEVER get them off.
You are either using the wrong size Torx driver, or pushing too hard.
Try lubricating the screw from the opposite side.
Carlos

Saprissa@aol.com
Trending Topics
if you've already stripped the screw. Your only alternative may be what Doug said,
and drill them out. You're going to have to get new screws altogether, and recommend getting a good set of TORX drivers.
The Best of Mercedes & AMG
just make sure you're using the right size TORX driver.
it should fit snuggly and tight. if you're off by just one size you start stripping the inside pattern of the screw.
if, it still won't come off... might have to take it in to a body shop.
Carlos

Saprissa@aol.com


