D.I.Y. - M271 Air Filter Change
1. Remove the plastic cover
2. The stock filter should now be exposed
3. Remove the stock filter along with extra dirt, leaves, bees, you name it
4. install your K&N filter (it already comes pre-oiled)
5. Screw the plastic cover back on
6. Haul ***!
Enjoy
Last edited by Zillarpillow23; Aug 21, 2015 at 06:56 PM.
:v
Last edited by Zillarpillow23; Aug 21, 2015 at 06:56 PM.

it looks like there's only four screws... at least now I know it won't be as hard (looking at least) from the writeups I've seen from the C55 and C320.
hopefully I'll be doing the same soon.

also, the stock is supposed to last pretty long too right?
the reason why I ask is because I was thinking of just getting the filter and then after 30k miles or so just getting a new one so I don't risk re-oiling it and such and possibly messing up my MAF...
also, the stock is supposed to last pretty long too right?
the reason why I ask is because I was thinking of just getting the filter and then after 30k miles or so just getting a new one so I don't risk re-oiling it and such and possibly messing up my MAF...
You could always just purchase a new filter, Phil. $50 ain't that much. I'm too lazy to clean stuff, so I might do the same.
Trending Topics
I had mine custom painted the same color as my car now Midnight Blue 904 Mercedes Benz paint.
Last edited by drexappeal; Nov 16, 2005 at 08:36 PM.
The Best of Mercedes & AMG
it looks like there's only four screws... at least now I know it won't be as hard (looking at least) from the writeups I've seen from the C55 and C320.
hopefully I'll be doing the same soon.
the whole process should take less than 10 minutes.
1-do u have to screw the plastic peace bak on??
2-if you dont .. is it louder ...
3.possibly a bit .. better .. as in hp ?
4- what could be as a result if you dont screw it bak on? ..
cause like some cars like Honda ect .. has it like that as a intake opened ...
5-will i have to replace the filter earliar if i do open the plastic .. be cause dust will ge tin easiar and faster ?
Thanks you
1-do u have to screw the plastic peace bak on??
2-if you dont .. is it louder ...
3.possibly a bit .. better .. as in hp ?
4- what could be as a result if you dont screw it bak on? ..
cause like some cars like Honda ect .. has it like that as a intake opened ...
5-will i have to replace the filter earliar if i do open the plastic .. be cause dust will ge tin easiar and faster ?
Thanks you
I couldn't more pics so here they are with some alternate views and some collaterall damage.
uhh.....
how much?
how much?
:v
:v
:v
lols, you know, I called MBUSA and they said no replacements of the air filter =T
Now, I'm an 03 and the car did about 23k in SoCAL, and I've added about 4k of Vegas Valley Dust, currently at 27K. When I am done replacing my filter (I appreciate this thread.... BIGUPS to chkdg8 and mbworld) I will try and post pics to see how dirty it really was.
MORE CONTRIBUTIONS:
1. Torque size is T27.
2. There are 6 screws - not 4. (dont' forget the ones hidden in the back)
3. It only takes 10 minutes b/c the screws are so damn long. Otherwise it would take 5 min or less.
4. I found a moth in my airbox! Yuck!
Good luck. Have fun. I'm getting my K&N asap.


