Hyper-White & LED License Plate Lights thread
http://cgi.ebay.com/ebaymotors/2-No-...item2a051695b0
Work great and are bright.
These same ones actually.
http://cgi.ebay.com/ebaymotors/2-No-...item2a051695b0
Cheap!
These same ones actually.
http://cgi.ebay.com/ebaymotors/2-No-...item2a051695b0
Cheap!
this is an error free (or it comes with resistor not sure..) LED setup
http://www.e92-lighting.com/products..._A-404-39.html
and so is this one
http://www.pyspeed.com/product-p/dash-8022.htm
but again, if you want to stay away from LED, then Hoen's do a good job with the whitish/blue light
The Best of Mercedes & AMG
Do buy LED bulb replacements. They look much better than hyper white bulbs. The ones on eBay for $15/pair that omg its nate gave a link for will not cause errors and look great. I bought a set myself from a different seller on ebay for $19 a pair and am very satisfied with them.
Hoen's are nice, but VERY expensive. The $15 ones on ebay will do just fine.
tim! cant see to find these anywhere.. their website doesn't say who the dealers are either.. where did you get yours?
thanks
http://cgi.ebay.com/ebaymotors/2-No-...item2a051695b0
Work great and are bright.
Last edited by lbmazdaspeed; May 9, 2010 at 01:43 AM.
If it were more central to the plate I woulda done it already.

+1 the light from the hoen bulbs are spread very evenly, it looks OEM, and really nice
These ones, i dont remember 100%, but im pretty sure it was the C5W 36mm




And the kicker...total cost = $2 (resistors) + $5 (any Ebay LED's) + about 3 hours labor.
Let me know if any of you guys have questions.
And the kicker...total cost = $2 (resistors) + $5 (any Ebay LED's) + about 3 hours labor.
Let me know if any of you guys have questions.

it literally took longer to unscrew the cover than to actually install the bulb and ive never had one go out or one error message
http://www.hoen-usa.com/licenseplate.htm
And the kicker...total cost = $2 (resistors) + $5 (any Ebay LED's) + about 3 hours labor.
Let me know if any of you guys have questions.
. Andy
How do you replace the lights on the sedan? i unscrewed the 2 screws holding the plastic covers over the bulb and they didn't budge, and i didn't feel smart/safe trying to pry at it.. do i hvae to remove the trunk liner and go in through the back?
I'm not replacing the whole unit with LEDs, i bought the Hoen bulbs so just need to swap the bulbs out




