sdsilverm3

Fedex has been pretty reliable in my experience as well. You know UPS is bad when their own employees tell you to use Fed-ex.

BlackC230Coupe

I definitely do not recommend the double side tape thing. This is very simple to install. When you hold this up to the car it is almost not flush, you have to do one side at a time. Using double sided tape will not allow it to mount properly and the lip will never be straight on the car. All I can say is read the instructions and follow them. If you have someone else install it, make it clear to them to follow the instructions. It is very simple. Once you read the instructions the lip can be installed in 5 min. Very easy job.

jan ken po

I was thinking of the double sided deal too. But just may get some of the neighborhood kids to help me.

Trekman

wow 5 min job! Sweet cant wait till Tuesday


thanks Neal

ericnovember

If there is anyone in the NY/NJ area who gets their lip and wants to work on installing it together I'm totally up for it. Just PM or e-mail me and let me know when!

Regards,
Eric Y.

BlackC230Coupe

Once you have the front end up to have room for a drill, 5 min. I have done it with the stock jack before but just had to keep switching sides. Maybe add another 5 min to that if you do it that way. Either way, its a pretty quick install.

IL230K

Neal, any way of getting an accent panel in carbon fiber created for the rear W203 AMG bumper. It would be that indented section of the rear bumper, some folks have either painted it or "decal" covered it. For all the other AMG models they come accented with a black plastic like cover. Getting one made in carbon fiber would be great, especially since it would match the front lilp. I'd be interested.

MiKeSSw203

Me too Neal!
Can't wait till my Lip arrives

BlackC230Coupe

We were going to do that. Still might. But it got put off. We were going to do a rear CF diffuser. Although at this time, i really don't know when or even if it will be done.

EV0LVE

congartulations to all of you that's waiting for your lip now, as for me, i'm still waiting for the next group-buy on this lips

jan ken po

Guess I'm the 1st to post pics. About a 10 min install for me & my 10 year old.
Thanks again Neal!!!!

Ultraman

Nice Job.

Can you post some pictures of the side edge of the lip which flushed with the bumper? I will install the lip tommorrow, but I still have no idea how to locate the ends of the lip.

Do you need to jack up the car for the installation? Any tips / precautions when you do the installation? What are the 3 pre-drilled holes on each side of the lip that never mentioned in the installation instruction?

Thanks.

BlackC230Coupe

The 3 holes not mentioned in the instructions have nothing to do with the install. That has to do with how it was made and the mold. Just follow the instructions exactly and your good to go. You somehow need to get the front end up to fit a drill under the bumper, so either use the stock jack, a floor jack and switch sides, or jackstands etc..

jan ken po

It is relatively easy. Just follow the good instructions by Neal & co. Mine practically fit flush so there was no pulling or pushing needed by me. Car was already jacked up. Son held one side, and I happen to have to short pieces of 2x4 just the right size to wedge under the front. (used shop towel to cover 2x4). The rest is just as the guide says and 10 mins later I was done.

My advice would be to not try it by yourself. Not that you can't, but easier with at least 2 people. Also, do it over a non-abrasive surface or put some old beach towels down at the area like I did. I dropped mine during a test fitment cuz I caught my finger on a edge (hurt like a bizzznitch). Scratch the bottom slighty.

Ultraman

Thanks for the photo. Now, I understand how the lip positioned at the bumper edge. It looks like the edge of the lip just slightly wrapped around the edge of the bumper.

Did you just put the jack under the front side of the lifting point of the car in order to lift up the car? I am planning to use the hydralic jack to lift my car up; however, I am still waiting my friend to come over to my place to give me a hand.

BlackC230Coupe

That looks great! What kind of wheels are those? they look nice too.

jan ken po

Yeah it kinda cuffs the bumper at that point. Well I had just finish putting my wheels on so the was already jacked up on both sides.

Thanks, Mandrus Milleniums.

Ultraman

I just installed the lip on my car too. It looks much sporty; however, we need Neal to design the CF spoiler for our cars in the future.

Thanks Neal for all the customer / technical supports for this group buy!

1Lop2K5C

Car is a lil dirty but enjoy :

C240Style

This thread really makes me wish I had either a) a C32AMG or b) the AMG package

14cue

1Lop2K5C,

looks hot! take a wider shot so we can see what it looks like with those dope wheels

14cue

1Lop2k5c,
i notice you have euro bumper strips, they look mint!
i'll be getting mine soon (hopefully). what did you do with the bumper bulbs?

e1000

man.... that Mars Red is growing on me. And Mars Red + CF lip is HOTT

1Lop2K5C

Thanks, I thought the lip would hang lower but it sits perfectly. No ground clearance issue so far. Thanks again for a great lip Neal !

14cue.. the bumper bulbs are now illuminating the inside of the bumper I ll take some more pics this weekend after she is washed.

14cue

i see. thats what most do. no tape around the bulb or anything? i'm still deciding what i should do before i receive my strips.