DIY installation of AVIC & other aftermarket HU's for W203 (Warning! lots of images!)
#151
Senior Member
Join Date: Mar 2006
Location: rochester, MI
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230 K, 6 speed
I am installing a Pioneer AVIC D2 in my car this weekend. I have a coupe with bose in it. I took the rear passenger right side panell off, and also the trunk cover for the subwoofer.
Questions:
1. How did you get the whires from the head unit in the back for the amp.
2. Is the bose sub going to work with the new amp?
3. Did you still connect the center speaker from the dash? If yes, how?
4.Could I place the new amp where the bose amp sits right now? I do not have an amp yet so I will look for something smaller thet could maybe fit there.
5. Is it possible to run all the speakers on the main units built in amp. or it has to be a separate one?
6. I understand that the vehicle speed sensor is under the fuse box. Is that correct? If so, how do I remove the fuse box to get to the VSS?
Thank you very much and I hope that this will not be to much trouble for you.
Greetings, John
Questions:
1. How did you get the whires from the head unit in the back for the amp.
2. Is the bose sub going to work with the new amp?
3. Did you still connect the center speaker from the dash? If yes, how?
4.Could I place the new amp where the bose amp sits right now? I do not have an amp yet so I will look for something smaller thet could maybe fit there.
5. Is it possible to run all the speakers on the main units built in amp. or it has to be a separate one?
6. I understand that the vehicle speed sensor is under the fuse box. Is that correct? If so, how do I remove the fuse box to get to the VSS?
Thank you very much and I hope that this will not be to much trouble for you.
Greetings, John
Last edited by cla 1000; 11-15-2006 at 06:46 PM.
#153
MBWorld Fanatic!
Join Date: Mar 2006
Location: Boston
Posts: 6,665
Likes: 0
Received 4 Likes
on
3 Posts
2004 C32 ///AMG
#154
Senior Member
Join Date: Mar 2006
Location: rochester, MI
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230 K, 6 speed
![Mad](https://mbworld.org/forums/images/smilies/mad.gif)
Please help with a "translation" of that thread.
#155
By the way, you can tap into the speed sensor but I found out that is too much trouble (or more than I wanted to be involved). Not needed though, it's pretty accurate as it is.
#156
Senior Member
Join Date: Mar 2006
Location: rochester, MI
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230 K, 6 speed
My friend that is going to do all the whireing said that I have to have the VSS othewhise it will not work.
I just want that thing in there allready. Right now it's laying on the flor in my bedroom.
#157
Senior Member
Join Date: Mar 2006
Location: rochester, MI
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230 K, 6 speed
Installed AVIC D2 in 2002 Coupe with Bose
K. I finally got my AVIC D2 installed today. My friend did all the whireing. He installed a sony amp in place of the bose amp, to power the Bose sub. All my speakers are powered by the D2. The sound is 10 times better than before and it looks great. I will try to take some pictures tomorow and I'll try to put them here.
The VSS was exactly where it sais in those older posts. It was hard to take the fuse box out but we did it.
Overall I am very happy with the results and the unit itself is great.
I have my 30gig Ipod video conected through the AV input and moovies are not bad at all. Sound is great.
The VSS was exactly where it sais in those older posts. It was hard to take the fuse box out but we did it.
Overall I am very happy with the results and the unit itself is great.
I have my 30gig Ipod video conected through the AV input and moovies are not bad at all. Sound is great.
#158
MBWorld Fanatic!
Join Date: Mar 2006
Location: Boston
Posts: 6,665
Likes: 0
Received 4 Likes
on
3 Posts
2004 C32 ///AMG
K. I finally got my AVIC D2 installed today. My friend did all the whireing. He installed a sony amp in place of the bose amp, to power the Bose sub. All my speakers are powered by the D2. The sound is 10 times better than before and it looks great. I will try to take some pictures tomorow and I'll try to put them here.
The VSS was exactly where it sais in those older posts. It was hard to take the fuse box out but we did it.
Overall I am very happy with the results and the unit itself is great.
I have my 30gig Ipod video conected through the AV input and moovies are not bad at all. Sound is great.
The VSS was exactly where it sais in those older posts. It was hard to take the fuse box out but we did it.
Overall I am very happy with the results and the unit itself is great.
I have my 30gig Ipod video conected through the AV input and moovies are not bad at all. Sound is great.
#159
Senior Member
Join Date: Mar 2006
Location: rochester, MI
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230 K, 6 speed
#161
Hello all. I'm new here so please pardon my ignorance. I have a 2005 mercedes c230 kompressor with "standard" radio (Not sure if it's Harmon Kardon or not but i doubt so). Can the avic-z1 be installed in the same manner as you did in your car? Your radio setup looks different from mine. Any response would be appreciated.
#162
Senior Member
Join Date: Mar 2006
Location: rochester, MI
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230 K, 6 speed
Ok. It's the first time I am posting pictures over here so I hope it works.
It was dark outside but, I will try take some more on day light tomorrow.
It was dark outside but, I will try take some more on day light tomorrow.
#165
Senior Member
Join Date: Mar 2006
Location: rochester, MI
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230 K, 6 speed
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
I didn't get the Ipod adaptor yet but, Ill get it today from CC and put it in when I will do the hack.
The unit works great. I have the AV cable for my Ipod and the video quality is good.
Overall I am more than happy with it.
![rice](https://mbworld.org/forums/images/smilies/rice.gif)
![rice](https://mbworld.org/forums/images/smilies/rice.gif)
![rice](https://mbworld.org/forums/images/smilies/rice.gif)
#166
![Smile](https://mbworld.org/forums/images/icons/icon7.gif)
Hello all. I'm new here so please pardon my ignorance. I have a 2005 mercedes c230 kompressor with "standard" radio (Not sure if it's Harmon Kardon or not but i doubt so). Can the avic-z1 be installed in the same manner as you did in your car? Your radio setup looks different from mine. Any response would be appreciated.
![DIY installation of AVIC & other aftermarket HU's for W203 (Warning! lots of images!)-stereo.jpg](https://mbworld.org/forums/attachments/c-class-w203/92134d1468963806t-diy-installation-avic-other-aftermarket-hu-s-w203-warning-lots-images-stereo.jpg)
I have pictures of the stereo setup i have for my ride. Is this a double DIN setup? I ask because the stereo looks too wide to be a double DIN configuration. Anways, with this pic, can any body tell me if i can still install the avic-Z1. I want to know before i look into ordering the avic-Z1
Note: This pic was obtained from http://www.classyauto.com/v/Mercedes+C230/51658. This is NOT my car but has the stereo in this car has the same configuration as that in mine.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Last edited by naijabenz; 11-22-2006 at 02:16 PM.
#167
MBWorld Fanatic!
Join Date: Mar 2006
Location: Boston
Posts: 6,665
Likes: 0
Received 4 Likes
on
3 Posts
2004 C32 ///AMG
Attachment 92134
I have pictures of the stereo setup i have for my ride. Is this a double DIN setup? I ask because the stereo looks too wide to be a double DIN configuration. Anways, with this pic, can any body tell me if i can still install the avic-Z1. I want to know before i look into ordering the avic-Z1
Note: This pic was obtained from http://www.classyauto.com/v/Mercedes+C230/51658. This is NOT my car but has the stereo in this car has the same configuration as that in mine.![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
I have pictures of the stereo setup i have for my ride. Is this a double DIN setup? I ask because the stereo looks too wide to be a double DIN configuration. Anways, with this pic, can any body tell me if i can still install the avic-Z1. I want to know before i look into ordering the avic-Z1
Note: This pic was obtained from http://www.classyauto.com/v/Mercedes+C230/51658. This is NOT my car but has the stereo in this car has the same configuration as that in mine.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#168
#169
Senior Member
Join Date: Mar 2006
Location: rochester, MI
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230 K, 6 speed
#170
MBWorld Fanatic!
Join Date: Oct 2002
Location: Louisiana
Posts: 7,587
Likes: 0
Received 0 Likes
on
0 Posts
E320
With the permission of fanito, I've posted the DIY here:
http://www.wikieasy.org/index.php/In...IC_Z1_for_W203
You guys can add to it if something needs clarification. Thanks to fanito!
http://www.wikieasy.org/index.php/In...IC_Z1_for_W203
You guys can add to it if something needs clarification. Thanks to fanito!
Last edited by oggle; 11-22-2006 at 10:43 PM.
#171
K. I finally got my AVIC D2 installed today. My friend did all the whireing. He installed a sony amp in place of the bose amp, to power the Bose sub. All my speakers are powered by the D2. The sound is 10 times better than before and it looks great. I will try to take some pictures tomorow and I'll try to put them here.
The VSS was exactly where it sais in those older posts. It was hard to take the fuse box out but we did it.
Overall I am very happy with the results and the unit itself is great.
I have my 30gig Ipod video conected through the AV input and moovies are not bad at all. Sound is great.
The VSS was exactly where it sais in those older posts. It was hard to take the fuse box out but we did it.
Overall I am very happy with the results and the unit itself is great.
I have my 30gig Ipod video conected through the AV input and moovies are not bad at all. Sound is great.
hmmm this is very interesting for me.
So i have Audio 10 CD with bose sound system on my scoupe.
cla1000 you're still using the bose speakers, right? and the pioneer is powering them? correct..?
I wanted to connect a PC (with RCA or Jack/Mini-Jack..doesn't matter the plug) to my bose sound system..so the bose speakers could give the sound that comes out of the computer. does anyone has any idea on how can i do this? Audio 10 doesn't have any Aux Input so.. i would need to install an extra amp in the place of the bose amp? ahmmm.. any help would be appreciated.
thanks in advance,
#173
Senior Member
Join Date: Mar 2006
Location: rochester, MI
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230 K, 6 speed
So i have Audio 10 CD with bose sound system on my scoupe.
cla1000 you're still using the bose speakers, right? YES
and the pioneer is powering them? correct..?CORRECT, except the bose sub that is now powered by a POS sony amp. That sits in the same place where the bose amp was. I ordered a new 2 OHM amp (300W MTX) to replace the sony, because right now when the volume on the sub is a little higher, the sony will shut down. The sony amp is a 4 ohm one.
For right now I would like to keep a clean interior so I want my amp hidden behind the pannell.
cla1000 you're still using the bose speakers, right? YES
and the pioneer is powering them? correct..?CORRECT, except the bose sub that is now powered by a POS sony amp. That sits in the same place where the bose amp was. I ordered a new 2 OHM amp (300W MTX) to replace the sony, because right now when the volume on the sub is a little higher, the sony will shut down. The sony amp is a 4 ohm one.
For right now I would like to keep a clean interior so I want my amp hidden behind the pannell.
#175
So i have Audio 10 CD with bose sound system on my scoupe.
cla1000 you're still using the bose speakers, right? YES
and the pioneer is powering them? correct..?CORRECT, except the bose sub that is now powered by a POS sony amp. That sits in the same place where the bose amp was. I ordered a new 2 OHM amp (300W MTX) to replace the sony, because right now when the volume on the sub is a little higher, the sony will shut down. The sony amp is a 4 ohm one.
For right now I would like to keep a clean interior so I want my amp hidden behind the pannell.
cla1000 you're still using the bose speakers, right? YES
and the pioneer is powering them? correct..?CORRECT, except the bose sub that is now powered by a POS sony amp. That sits in the same place where the bose amp was. I ordered a new 2 OHM amp (300W MTX) to replace the sony, because right now when the volume on the sub is a little higher, the sony will shut down. The sony amp is a 4 ohm one.
For right now I would like to keep a clean interior so I want my amp hidden behind the pannell.
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
thanks in advance,