Front seat and steering wheel removal without disconecting the battery
04-03-2007, 04:19 AM
#1
Member
Thread Starter
Join Date: Nov 2006
Location: Brisbane, Australia
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
C32
Front seat and steering wheel removal without disconecting the battery
I was just going to remove the battery before tryng to figure out how to pull out the steering wheel and front seats ...... but after reading about all the hassles people have had when disconnecting the battery, I guess I should try and get seme advice of anyone who has pulled the seats and wheel with the battery connected as I don't want to have any airbag problems or errors from dissconnecting the seats while the car has power........ how have you guys done it ?
04-03-2007, 06:54 AM
#2
Out Of Control!!
As long as you replug the seat back in, you'll have no errors. The steering wheel, I've never removed, but I wouldn't want to have the power on when I'm messing around with it, on general principles.
04-03-2007, 04:50 PM
#3
Member
Thread Starter
Join Date: Nov 2006
Location: Brisbane, Australia
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
C32
Yeh I am worried abotu the airbag going off in my face :0
So to pull the battery, I just dissconnect the negative termonal .... like a normal car .... and then reattach the negative when I am done ?
So to pull the battery, I just dissconnect the negative termonal .... like a normal car .... and then reattach the negative when I am done ?
04-03-2007, 08:21 PM
#6
Member
Thread Starter
Join Date: Nov 2006
Location: Brisbane, Australia
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
C32
Thanks Sunman ... so I can pull the steering wheel with the battery still connected, and there is no hassle with the airbag going off ?.... I assume it is just the torx screws at the back, and then pull it off and dissconnect the wires ?
And the same with the seats .... disconnecting the seat wires while the battery is connected will not cause any errors when I reconnect the seat wires ?
And the same with the seats .... disconnecting the seat wires while the battery is connected will not cause any errors when I reconnect the seat wires ?
04-03-2007, 09:03 PM
#7
MBWorld Fanatic!
Join Date: Mar 2006
Location: Boston
Posts: 6,665
Likes: 0
Received 4 Likes
on
3 Posts
2004 C32 ///AMG
Thanks Sunman ... so I can pull the steering wheel with the battery still connected, and there is no hassle with the airbag going off ?.... I assume it is just the torx screws at the back, and then pull it off and dissconnect the wires ?
And the same with the seats .... disconnecting the seat wires while the battery is connected will not cause any errors when I reconnect the seat wires ?
And the same with the seats .... disconnecting the seat wires while the battery is connected will not cause any errors when I reconnect the seat wires ?
then disconnect wires and remove the 10mm Hex bolt in middle with a Torque Wrench or Breaker Bar
Trending Topics
04-03-2007, 10:31 PM
#8
Member
Thread Starter
Join Date: Nov 2006
Location: Brisbane, Australia
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
C32
excellent, I appreciate the help 
and any info on getting the seats out.
This is all so I can put them in a heated room for a couple of days and soak them in Leatherique .... I did the same thing with my M3 seats and wheel, and the results were amazing.
and any info on getting the seats out.
This is all so I can put them in a heated room for a couple of days and soak them in Leatherique .... I did the same thing with my M3 seats and wheel, and the results were amazing.
