How do I get to my front turn signal bulb to replace it?
Thread Starter
Newbie
Joined: Jul 2007
Posts: 14
Likes: 0
How do I get to my front turn signal bulb to replace it?
Hi everybody. I drive an 02 C230K Sportcoupe. My driver side front turn signal just went out. I popped the hood and noticed things are a lot more complicated than the lights in back, which are the only ones I've replaced previously. How do I get to this bulb? Do I have to take out the whole assembly? There's a rubber bushing/grommet/seal/whatever around the lenses to keep water from getting in that I'm afraid of taking out and not putting back in correctly. Also, can this be done without tools? I noticed alot of clips.
Last edited by blk; Jul 7, 2007 at 12:03 PM.
MBWorld Fanatic!
Joined: Feb 2007
Posts: 3,840
Likes: 1
From: MA
E90 M3
Hi everybody. I drive an 02 C230K Sportcoupe. My driver side front turn signal just went out. I popped the hood and noticed things are a lot more complicated than the lights in back, which are the only ones I've replaced previously. How do I get to this bulb? Do I have to take out the whole assembly? There's a rubber bushing/grommet/seal/whatever around the lenses to keep water from getting in that I'm afraid of taking out and not putting back in correctly. Also, can this be done without tools? I noticed alot of clips.
Thread Starter
Newbie
Joined: Jul 2007
Posts: 14
Likes: 0
Replaced it this morning, but still getting the fault. I'm going to try with another bulb in case I somehow F'ed this one up, but if not - does this sound like the dreaded lamp wiring issues I've heard about?
MBWorld Fanatic!
Joined: Nov 2003
Posts: 4,278
Likes: 0
From: Fresno, CA
'09 A4 S Line
Last edited by Blake P; Jul 8, 2007 at 01:12 AM.
