View Poll Results: Aftermarket Wheel Thread
W203
![](https://mbworld.org/forums/images/polls/bar2-l.gif)
![](https://mbworld.org/forums/images/polls/bar2.gif)
![](https://mbworld.org/forums/images/polls/bar2-r.gif)
![](https://mbworld.org/forums/clear.gif)
0
0%
CL203
![](https://mbworld.org/forums/images/polls/bar3-l.gif)
![](https://mbworld.org/forums/images/polls/bar3.gif)
![](https://mbworld.org/forums/images/polls/bar3-r.gif)
![](https://mbworld.org/forums/clear.gif)
0
0%
Voters: 0. You may not vote on this poll
W203/CL203 Aftermarket Wheel Thread - All you want to know
#3501
Senior Member
Join Date: Jul 2006
Location: SoCal
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
non-MB
You got me John. All I know is the guys at Status put 3mm spacers on the front wheels. I have no issues with bolt engagement due to new bolts from the new wheels. However I do get slight vibration at 70mph and beyond; it's very minimal, but it lets you know its there. Didn't get vibrations before the Teins were put on, so I doubt it's from the wheels . Hopefully those who read this can help you more than me.
Thanks for the pic. Maybe I'll use it for my signature
Thanks for the pic. Maybe I'll use it for my signature
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#3502
Senior Member
Join Date: Jun 2007
Location: Boston, MA
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
2005 A4 1.8TQ
Thanks Greg and BadAssC230K, just the answers I was looking for. I don't think I'll be dropping my car anytime soon, so that shouldn't be an issue. As far as getting them from 7/1, would you mind me asking how much it cost for all 4 and what finish you got on them? The cheapest I seem to be able to find in chrome is about $1350 shipped (yes I know chrome rims seem to be sacraligious around here, but I think they'll look better as my car is silver and I don't like color matched rims). Oh, and the actual Mercedes center caps look much better than the Mandrus "M" ones IMO. Thanks again guys, good stuff.
#3503
MBWorld Fanatic!
Join Date: Mar 2006
Location: Boston
Posts: 6,665
Likes: 0
Received 4 Likes
on
3 Posts
2004 C32 ///AMG
If you don’t mind me asking, whose spacers did you install and how thick are they? Any issues with sufficient bolt engagement or vibration?
Reason being, I’m running 8½ X 17, 34ET (OE AMG rears) up front to help alleviate understeer. Even with the stock 225/45/17s, there is less than 1/16 strut clearance. Some of the track guys (Fifth Ring, AWDman) on the C32/55 forum are using the same spacer-less wheel with a 245/40. That’s not going to work for me unless I can source a proper spacer. Any advice would be most appreciated.
Credit to gregr09 for this pic-![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Reason being, I’m running 8½ X 17, 34ET (OE AMG rears) up front to help alleviate understeer. Even with the stock 225/45/17s, there is less than 1/16 strut clearance. Some of the track guys (Fifth Ring, AWDman) on the C32/55 forum are using the same spacer-less wheel with a 245/40. That’s not going to work for me unless I can source a proper spacer. Any advice would be most appreciated.
Credit to gregr09 for this pic-
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
try a 5mm H&R spacer. that will make it ET29.
you'll need 5mm longer bolts too. do you have coilovers?
BTW, love your Supersprint!
#3504
Super Moderator
Didn’t know of any members who have used them successfully. Until now that is. Thanks Robert. Coilovers are on the list, funds permitting. At this rate, looks like new tires will be first. Rather get the 245 fronts and 255 rears while at the tire store, if they can be spaced to fit without rubbing.
Anticipating the VMR V715 group buy is going to happen. That set will be for meets, track events and weekend cruises. The stockers will then be relegated to daily driving, with curb feelers for the Mrs.
Wish that Supersprint was mine...that is gregr09’s tight ride!
Anticipating the VMR V715 group buy is going to happen. That set will be for meets, track events and weekend cruises. The stockers will then be relegated to daily driving, with curb feelers for the Mrs.
Wish that Supersprint was mine...that is gregr09’s tight ride!
#3506
MBWorld Fanatic!
Join Date: Mar 2006
Location: Boston
Posts: 6,665
Likes: 0
Received 4 Likes
on
3 Posts
2004 C32 ///AMG
Didn’t know of any members who have used them successfully. Until now that is. Thanks Robert. Coilovers are on the list, funds permitting. At this rate, looks like new tires will be first. Rather get the 245 fronts and 255 rears while at the tire store, if they can be spaced to fit without rubbing.
Anticipating the VMR V715 group buy is going to happen. That set will be for meets, track events and weekend cruises. The stockers will then be relegated to daily driving, with curb feelers for the Mrs.
Wish that Supersprint was mine...that is gregr09’s tight ride!
Anticipating the VMR V715 group buy is going to happen. That set will be for meets, track events and weekend cruises. The stockers will then be relegated to daily driving, with curb feelers for the Mrs.
Wish that Supersprint was mine...that is gregr09’s tight ride!
#3508
Super Moderator
Yeah, I was afraid of that. The 19 inch VMR’s will be wrapped with 235/35 and 265/30.
Back on topic, jan ken po, your car looks sharp! Very cool.
Back on topic, jan ken po, your car looks sharp! Very cool.
#3509
For pete's sake people, it's an expression. ![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Like saying: "I'm gonna kill that ******* in the BMW that cut me off."
You're not really going to kill him, just feel sorry for him and his poor judgement when buying a car.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Like saying: "I'm gonna kill that ******* in the BMW that cut me off."
You're not really going to kill him, just feel sorry for him and his poor judgement when buying a car.
#3511
MBWorld Fanatic!
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
#3513
Almost a Member!
Join Date: Mar 2007
Location: Bay area
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
w203
I am getting ready to sell my mandrus Millinums they are 18x8.5 et32 and 18x9.5 et35 wrapped in Michlin Pilot sport a/s...I am just waitng for my new rims to come... I was thinking a trade and some cash let me know 408-550-5855
Thank You!!!!
Thank You!!!!
#3514
MBWorld Fanatic!
Join Date: Jun 2006
Location: Long Island, NY
Posts: 2,140
Likes: 0
Received 0 Likes
on
0 Posts
C3Twon AWD Jumpofffff
i wanted to go for those wheels but didnt think they would go nice for my car b/c its the non facelifted sedan but on the sedans with the amg kit it looks great. those are good wheels i think they are hubcentric?? not sure i might be wrong but thats what i've heard
#3516
What do you guys think of these wheels?
Hey guys, well im new to the whole Mercedes world, so I have been trying to figure it all out so forgive me for my nubness.. lol...
so I had my first experiance with a crappy ebay grill... dont order the carbon badgeless grill off of ebay and expect it to fit a 2003 c320, even though it specifically says it will fit. Plus the carbon, even though i knew it wasnt going to be real carbon, was the worst spray on carbon print i have ever seen!!!
anyway for the real topic here i am thinking of getting these rims and wanted to know what you guys think! plus make sure my fitment is correct. here is the rim
![](http://www.edgeracing.com/images/wheel/ssw_raze_(gloss_black)_angle_zoom.jpg)
Ssw Raze (gloss Black)
Size: 18x8
PCD: 5x112
ET: 38
Weight: 25.5lbs.
a little heavy but then again im looking more for looks then performance.. so for the back though i thought i would throw on some 10 mm spacers to push them out a little. shouldnt have any problems with this right?
so I had my first experiance with a crappy ebay grill... dont order the carbon badgeless grill off of ebay and expect it to fit a 2003 c320, even though it specifically says it will fit. Plus the carbon, even though i knew it wasnt going to be real carbon, was the worst spray on carbon print i have ever seen!!!
anyway for the real topic here i am thinking of getting these rims and wanted to know what you guys think! plus make sure my fitment is correct. here is the rim
![](http://www.edgeracing.com/images/wheel/ssw_raze_(gloss_black)_angle_zoom.jpg)
Ssw Raze (gloss Black)
Size: 18x8
PCD: 5x112
ET: 38
Weight: 25.5lbs.
a little heavy but then again im looking more for looks then performance.. so for the back though i thought i would throw on some 10 mm spacers to push them out a little. shouldnt have any problems with this right?
#3518
I can see where you would say that, the bars are a little thick at the end. I'm torn because i want black, but i dont wan to thin of a bar, becuase then it looks a little too import race for me... but i dont want bling bling either... lol
#3520
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Join Date: Jul 2003
Location: MBworld
Posts: 20,941
Received 744 Likes
on
725 Posts
bone stock E55 AMG
Hyper Silver
1) Blake P (confirmed)
2) mj50 (confirmed)
3) emrliquidlife (confirmed)
4) splinter (confirmed)
5) rdscklasse (confirmed)
6) edtv82 (confirmed)
7) PheelinIt (confirmed)
8) Kilawin (confirmed)
9) eZg (confirmed)
-----
Hyper Black
1) mzcloud (confirmed)
2) Eurowow (confirmed)
3) JonB C240 (confirmed)
4) AndySays (confirmed)
5) tozfeekum (confirmed)
6) mono (confirmed)
7) C24owner (confirmed - 8.5" all around)
8) toughguy (confirmed)
9) Stormin (confirmed) - Faken FK-452
10) Takso (confirmed)
11) Takso (confirmed)
12) 292 (confirmed)
-----
Matte Black
1) EnkeiDynamics (confirmed)
2) kickR (confirmed)
3) temiLo (confirmed)
-----
Matte Maybe
1) coin (FS: LM6s)
2) c230ftw (Need money)
1) Blake P (confirmed)
2) mj50 (confirmed)
3) emrliquidlife (confirmed)
4) splinter (confirmed)
5) rdscklasse (confirmed)
6) edtv82 (confirmed)
7) PheelinIt (confirmed)
8) Kilawin (confirmed)
9) eZg (confirmed)
-----
Hyper Black
1) mzcloud (confirmed)
2) Eurowow (confirmed)
3) JonB C240 (confirmed)
4) AndySays (confirmed)
5) tozfeekum (confirmed)
6) mono (confirmed)
7) C24owner (confirmed - 8.5" all around)
8) toughguy (confirmed)
9) Stormin (confirmed) - Faken FK-452
10) Takso (confirmed)
11) Takso (confirmed)
12) 292 (confirmed)
-----
Matte Black
1) EnkeiDynamics (confirmed)
2) kickR (confirmed)
3) temiLo (confirmed)
-----
Matte Maybe
1) coin (FS: LM6s)
2) c230ftw (Need money)
#3523
Member
Join Date: Mar 2007
Location: Sonoma County, CA
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
2007 Arctic White C230
I think those are similar to the wheels my boyfriend and I just bought for our 05 chevy
They might work though, but I'm having trouble visualizing it working...pics might help!
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
They might work though, but I'm having trouble visualizing it working...pics might help!