bumpnzx3

i've came to the conclustion that black wheels just look better in person.

i went through a stage where i loved the millenium wheel, then i hated them, now i am back to liking them again. i think they might look better in silver- however that's not the best picture to showcase a wheel i guess.

pledenko

would this fit an e55?

bumpnzx3

i looked all over today- i can't find a picture anywhere of the stuttgard mounted on anything. looks somewhat promising- but it's hard to tell w/o seeing it on a car.

kevincao

Fitment question (from a Audi A4)

would DPE front 19/8.5 et33 rear 19/9.5 et39

fit on a c230 sedan?


spacers needed?

Blake P

You'll have to find out if the centers were bored to Audi spec since Audis have smaller hubs than MB. I'm not sure if DPE makes their wheels hubcentric to fit the specific car or bores the centers larger and uses hub rings to fit a specific car, but you definitely need to find out.

drexappeal

You tell us. Will it work?
LINK: OFFSET CALCULATOR

Just to refresh everybody's memory (or for newbies that still haven't read from the beginning of this thread, there is a link to the offset calculator and to a tire calculator to help make your decisions about purchasing rims.

Then, it's as easy as going out to your car and measuring.

MiKeSSw203

Hi all,
I want wheels for my mercedes. Its a c class but it has 230 on the back not 203 so maybe I'm posting in the wrong room Will any wheels 5x112 fit on my car?? I found a good looking set of Audi RS4 replicas I want to put on along with the badges. Will they work??

kevincao

lol sorry guys but i just switched from BMW to Mercedes so i don't know much about W203

I can't figure out how to use the offset calculator cause i don't know my original offset

So can someone please tell me if et33 front with fit and et39 rear

will i need spacers?

For the DPE, i can would how to buy Hubcentric rings to fit

drexappeal

You freakin' clown You like how I suggested the euro convex for your x-mas present from the lady?...

bumpnzx3

unless you can try it before you buy it, or have seen pictures of the wheels mounted- i wouldn't chance it. the calculator isn't always right. i bought wheels that were the "correct" offset and tire size (32mm F, 35mm R and 235F, 265 R)- but they still didn't clear the calipers on my car.



anyone able to find a picture of the stuttgards?

MiKeSSw203

lol I wasn't trying to make fun of just you. I too moderate on another board and would go crazy if I saw all these questions and was expected to answer them. I'll spoon feed you since Drex needs a vacation. If you are running coilovers spacers will be needed to clear the front suspension. Rears maybe fine but not flushed to the fender. If the wheels are hubcentric w/o rings to an Audi they would need to be bore out since MB's have a larger hub. I would recomended looking for another set designed to fit your car.

kevincao

thanks a lot

MiKeSSw203

https://mbworld.org/forums/classifieds/222032-f-s-19-oz-superleggeraiii-wheels-2-front-tires.html
great wheels @ a great price nowures about fitment on this set

kevincao

founded my answer...got a hold of DPE in Cali and they told me it will fit, just need spacer in the rear to make right with the fenders

thanks guys, will post pics when rims installed

drexappeal

I was so shocked to see what they were!

Only difference with mine is the 19X10 in the rear. Other than that, definitely worth the price he's selling at.

ctC230K

woah my heart just skipped a beat! those are HOT, i think i'm in love

BrabusBNZ

Yes they would fit on a an E55...

Rareamg

Looking to sell this week. No tires $2300.00 shipping extra.

SeaCoupe

Dood, I feel for you and have seen your ad. You are trying to sell snow in winter.

Sharp wheels all the same. Good luck.

MiKeSSw203

not really people who don't get what they wanted for Xmas may pick these up or ask a special somebody to get these for them as a present.

joyofcola

hey ppl,

planning to get the axis penta

19x8.5 et30 fronts on 235/35/19
19x9.5 et40 rears on 255/30/19

would this set up work on a coupe with H&R coils

thanks

MiKeSSw203

offsets seem ok but you may have a problem with clearing the calipers. It depends on how much wheel pad the rim has. Basically is amount of clearance from the mounting surface and the back of the spokes. I remember in the past a couple people have that problem with other AXIS wheels.

o2 jockey

if i just didnt buy new wheels i wouldve probably took this off you. bump for awesome wheels.

joyofcola

what if i dun have bbk will it still have clearence issues......and how will i find out about the padding
thx

Blake P

We could say yes, but nobody really knows until you try it. I'm more worried about the 40mm rear offset...you might need a 5mm spacer.