C63 diffuser on w203
#52
Senior Member
Join Date: Jan 2008
Location: Plymouth, Devon, England
Posts: 292
Likes: 0
Received 2 Likes
on
2 Posts
Mercedes Benz C200K Sport Edition and 04 C55 AMG
Just a quick tip. As you know from the pics of my diffuser the double-sided tape was showing at the edges especially at the top centre and sides, anyway i removed the diffuser today, took of the double-sided tape and stuck the whole diffuser back on with black sealant round the inside edges and centre of the diffuser (make sure you have turps or white spirit handy to wipe excess sealant off the bodywork and lots of old rags as the sealant is hard to remove once set). The plus is it will never come off and the edges now blend in with my black body colour and no tape or fibreglass edge is visible. Unfortunately, its started raining so will hopefully take some pics tomorrow.
Hope that helps.
Hope that helps.
#55
Got it!!
Sorry for the crappy pics (cell phone to excited), the one on the car it is not even attached just resting there, the fit is perfect and the quality is excellent. Teo, YOU ARE THE MAN!!
Sorry for the crappy pics (cell phone to excited), the one on the car it is not even attached just resting there, the fit is perfect and the quality is excellent. Teo, YOU ARE THE MAN!!
#56
MBWorld Fanatic!
#58
Member
Thread Starter
Join Date: Jun 2008
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
A45 AMG Edition 1
#60
#61
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
the fins are why people buy it. If they don't like the fins they can just vinyl or paint the diffuser to the same effect.
with any aerodynamic mods they do serve some purpose. the fins can actually direct the air flow from under the car out cleaner.
with any aerodynamic mods they do serve some purpose. the fins can actually direct the air flow from under the car out cleaner.
#62
Member
Thread Starter
Join Date: Jun 2008
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
A45 AMG Edition 1
#65
Side Vents for W203 AMG front bumper
Looks like everybody is happy with the W203 rear diffuser, mine is on its way. I think Teo did a good job here.
Just out of curiosity, do you think he can make this thing happen! I am interested for a W203 front bumper side vent, anyone? I will start another thread as its a bit off topic here.
EDIT: Sorry to have stolen pics from some other forum members, no offence.
Just out of curiosity, do you think he can make this thing happen! I am interested for a W203 front bumper side vent, anyone? I will start another thread as its a bit off topic here.
EDIT: Sorry to have stolen pics from some other forum members, no offence.
Last edited by cnchung; 07-30-2008 at 12:30 PM.
#66
Member
Thread Starter
Join Date: Jun 2008
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
A45 AMG Edition 1
Looks like everybody is happy with the W203 rear diffuser, mine is on its way. I think Teo did a good job here.
Just out of curiosity, do you think he can make this thing happen! I am interested for a W203, anyone? I will start another thread as its a bit off topic here.
EDIT: Sorry to have stolen pics from some other forum members, no offence.
Just out of curiosity, do you think he can make this thing happen! I am interested for a W203, anyone? I will start another thread as its a bit off topic here.
EDIT: Sorry to have stolen pics from some other forum members, no offence.
#67
There is not much room for the W203, if it can be done, in any of the styles above, I really want to see it happen. The one on the SLK55 Black Series is actually an add on piece with mesh behind it.
To save me from cutting the bumper, I may just have the area painted in black, lay the mesh on and then sticky on the vents. since the front bumper stays low to the ground, it may not be too visible.
If that does not look good enough, I will have it cut.
The most difficult part is to have the thing accurately fitted.
I look forward to it.
To save me from cutting the bumper, I may just have the area painted in black, lay the mesh on and then sticky on the vents. since the front bumper stays low to the ground, it may not be too visible.
If that does not look good enough, I will have it cut.
The most difficult part is to have the thing accurately fitted.
I look forward to it.
#73
Junior Member
#74
MBWorld Fanatic!
Join Date: Aug 2007
Location: Sacramento/San Gabriel/Riverside
Posts: 3,560
Likes: 0
Received 2 Likes
on
2 Posts
01' C32o
Looks like everybody is happy with the W203 rear diffuser, mine is on its way. I think Teo did a good job here.
Just out of curiosity, do you think he can make this thing happen! I am interested for a W203, anyone? I will start another thread as its a bit off topic here.
EDIT: Sorry to have stolen pics from some other forum members, no offence.
Just out of curiosity, do you think he can make this thing happen! I am interested for a W203, anyone? I will start another thread as its a bit off topic here.
EDIT: Sorry to have stolen pics from some other forum members, no offence.
#75
Super Member
Just a quick tip. As you know from the pics of my diffuser the double-sided tape was showing at the edges especially at the top centre and sides, anyway i removed the diffuser today, took of the double-sided tape and stuck the whole diffuser back on with black sealant round the inside edges and centre of the diffuser (make sure you have turps or white spirit handy to wipe excess sealant off the bodywork and lots of old rags as the sealant is hard to remove once set). The plus is it will never come off and the edges now blend in with my black body colour and no tape or fibreglass edge is visible. Unfortunately, its started raining so will hopefully take some pics tomorrow.
Hope that helps.
Hope that helps.
Thanks,
Cintoman