Just Rollnnn.... evolution of another W203..
02-22-2011, 02:24 AM
#926
MBWorld Fanatic!
Strut bar looks dope. Do you feel an improvement?
Car is looking sexy as hell. I don't know whose car to steal your or Phister's. You're close and if I steal your car you might catch me riding around town. Phister is all the way in Texas and I don't know if I'll be able to drive that far. Or I can just steal Phil's M5 or Eric's M3 but then again those are so fast I'll probably crash it. Ahh decisions decisions, I can steal Franks car but it's so unique and fast that I'll get busted soo quick or end up crashing it because it's soo fast.
What do you guys think? Can anyone help me out?
Phister and Rollnnn's car are top10 hottest 203s out there!!!
Car is looking sexy as hell. I don't know whose car to steal your or Phister's. You're close and if I steal your car you might catch me riding around town. Phister is all the way in Texas and I don't know if I'll be able to drive that far. Or I can just steal Phil's M5 or Eric's M3 but then again those are so fast I'll probably crash it. Ahh decisions decisions, I can steal Franks car but it's so unique and fast that I'll get busted soo quick or end up crashing it because it's soo fast.
What do you guys think? Can anyone help me out?
Phister and Rollnnn's car are top10 hottest 203s out there!!!
02-22-2011, 02:32 AM
#927
Super Member
Strut bar looks dope. Do you feel an improvement?
Car is looking sexy as hell. I don't know whose car to steal your or Phister's. You're close and if I steal your car you might catch me riding around town. Phister is all the way in Texas and I don't know if I'll be able to drive that far. Or I can just steal Phil's M5 or Eric's M3 but then again those are so fast I'll probably crash it. Ahh decisions decisions, I can steal Franks car but it's so unique and fast that I'll get busted soo quick or end up crashing it because it's soo fast.
What do you guys think? Can anyone help me out?
Phister and Rollnnn's car are top10 hottest 203s out there!!!
Car is looking sexy as hell. I don't know whose car to steal your or Phister's. You're close and if I steal your car you might catch me riding around town. Phister is all the way in Texas and I don't know if I'll be able to drive that far. Or I can just steal Phil's M5 or Eric's M3 but then again those are so fast I'll probably crash it. Ahh decisions decisions, I can steal Franks car but it's so unique and fast that I'll get busted soo quick or end up crashing it because it's soo fast.
What do you guys think? Can anyone help me out?
Phister and Rollnnn's car are top10 hottest 203s out there!!!
Theres always Matts car
02-22-2011, 02:38 AM
#928
MBWorld Fanatic!
Once I tried breaking into Matt's car. I couldn't get the thing started so I started looking around at what I can steal. I opened his glove compartment and pow!!! some weird rubber microphone looking stuff popped out and hit me across the face. For some reason this rubber fist flew out and hit my eye. I had a black eye for 1 month. Who the hell carries a rubber fist in their car?? I guess it's a new kind of security system.
02-22-2011, 02:43 AM
#929
Super Member
Once I tried breaking into Matt's car. I couldn't get the thing started so I started looking around at what I can steal. I opened his glove compartment and pow!!! some weird rubber microphone looking stuff popped out and hit me across the face. For some reason this rubber fist flew out and hit my eye. I had a black eye for 1 month. Who the hell carries a rubber fist in their car?? I guess it's a new kind of security system.
could be 
02-22-2011, 11:48 AM
#930
MBWorld Fanatic!
Thanks guys!
this is my current mod list:
Performance:
Kleeman Header
Renntech Pulley Kit
K&N air filter
Custom Intake
Custom Intercooler kit (thanks to Mikessw203)
OE Tune
Wheels, Brakes & Suspension:
WORK VS-XX: Burning black 19x8F +32 225/35, 19x9.5R +34 255/30
20mm spacer front, 10mm rear (lots of fender work)
Tein Basic coilovers
H&R Sway Bars
Custom front strut bar
Color matched front and rear Calipers
Brembo front and rear drilled and slotted rotors
Akebono ceramic pads
Body:
Clear Bra
Euro Impact Strips
CF Euroteck Front Lip
CF Front Grill
CF Salvatore Replica trunk spoiler, custom paint
CF rear diffuser
CF roof spoiler
CF double din faceplate
Custom Dual exhaust setup (magnaflow muffler)
Gloss Vinyl roof wrap
CF Sideview mirrors
Euro Folding side mirrors
Huper Optik Ceramic tint, 30% around & sunroof, 60% windshield
Bixenon
Audio:
Kenwood Excelon DNX8120(w/steering controls-thanks to JreC230)
2 JL 10w3
Custom sealed box
JL HD600.1 sub amp
I think that's it....
probably do some interior work next...
this is my current mod list:
Performance:
Kleeman Header
Renntech Pulley Kit
K&N air filter
Custom Intake
Custom Intercooler kit (thanks to Mikessw203)
OE Tune
Wheels, Brakes & Suspension:
WORK VS-XX: Burning black 19x8F +32 225/35, 19x9.5R +34 255/30
20mm spacer front, 10mm rear (lots of fender work)
Tein Basic coilovers
H&R Sway Bars
Custom front strut bar
Color matched front and rear Calipers
Brembo front and rear drilled and slotted rotors
Akebono ceramic pads
Body:
Clear Bra
Euro Impact Strips
CF Euroteck Front Lip
CF Front Grill
CF Salvatore Replica trunk spoiler, custom paint
CF rear diffuser
CF roof spoiler
CF double din faceplate
Custom Dual exhaust setup (magnaflow muffler)
Gloss Vinyl roof wrap
CF Sideview mirrors
Euro Folding side mirrors
Huper Optik Ceramic tint, 30% around & sunroof, 60% windshield
Bixenon
Audio:
Kenwood Excelon DNX8120(w/steering controls-thanks to JreC230)
2 JL 10w3
Custom sealed box
JL HD600.1 sub amp
I think that's it....
probably do some interior work next...
02-22-2011, 01:53 PM
#932
MBWorld Fanatic!
Thread Starter
Karo, i havent really had a chance to test it out too much, just turns on the streets, but so far so good.
02-22-2011, 02:05 PM
#933
MBWorld Fanatic!
Thread Starter
The plate was actually posted in this forum awhile ago, but of course it got bashed. It was posted in here and the w209 forum. Nobody had anything good to say about it. Then Dynomite in the w209 forum bought it and approved it and of course everyone jocked it. ....
Last edited by ROLLNNN; 02-22-2011 at 02:13 PM.
02-22-2011, 02:15 PM
#934
MBWorld Fanatic!
Thread Starter
did you feel a dramatic difference before and after the pulley?
thats one mod i know is hard to come by, but i'm wondering if its really worth it if i can ever find one... (if LET tuning ever gets around to finishing up their beta testing of their pulley for the m271)
thats one mod i know is hard to come by, but i'm wondering if its really worth it if i can ever find one... (if LET tuning ever gets around to finishing up their beta testing of their pulley for the m271)
Hopefully youll be able to get one...
02-22-2011, 02:17 PM
#935
MBWorld Fanatic!
Thread Starter
02-22-2011, 02:18 PM
#936
MBWorld Fanatic!
Thread Starter
02-22-2011, 02:20 PM
#937
MBWorld Fanatic!
Thread Starter
I was having that same problem a couple months ago. I even contacted Phil and another mod and they both told me i wasn't banned. After about a week, it just started working again.
02-22-2011, 04:24 PM
#938
MBWorld Fanatic!
Its actually my friends company. My din was the test fit and it was perfect. fit and quality. He was going to be selling them here, but i think he is just sticking to ebay.
The plate was actually posted in this forum awhile ago, but of course it got bashed. It was posted in here and the w209 forum. Nobody had anything good to say about it. Then Dynomite in the w209 forum bought it and approved it and of course everyone jocked it. ....
The plate was actually posted in this forum awhile ago, but of course it got bashed. It was posted in here and the w209 forum. Nobody had anything good to say about it. Then Dynomite in the w209 forum bought it and approved it and of course everyone jocked it. ....
The install was MUCH cleaner than the one they did in my C240. I've got some Scosche kits on the way, and I think I'm going to buy one of the CF ones. Not sure if it will look good with the Birdseye though.
03-06-2011, 01:39 PM
#941
MBWorld Fanatic!
Thread Starter
03-13-2011, 04:14 AM
#946
Senior Member
03-19-2011, 09:03 AM
#947
Super Member
Join Date: Mar 2011
Location: Jakarta, Indonesia
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
C240
03-25-2011, 02:33 PM
#948
Junior Member
Join Date: Aug 2007
Location: Singapore
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
CLK200 W209
Hi
Was just wondering, how did ya remove the cover of the intake hole you are currently using with the modded intake pipe?
Im driving a clk200 and carn't seem to be able to knock the cover off!
Nice mods btw! really interesting thread
ZY
Was just wondering, how did ya remove the cover of the intake hole you are currently using with the modded intake pipe?
Im driving a clk200 and carn't seem to be able to knock the cover off!
Nice mods btw! really interesting thread
ZY
03-25-2011, 04:38 PM
#949
Super Member
Join Date: Feb 2009
Location: Seattle
Posts: 676
Likes: 0
Received 1 Like
on
1 Post
W209, E46 M3 (dead), S54 swapped E46 Touring
was wondering.. is that a Vorsteiner spoiler on James' CLK?
and i'm waiting to order the Rogue Engineering stud kit until my wheels get here around May and i size out the front clearance. i'm guessing its a pretty straight forward install right?
and wheel and tire size for the CLK on LM's please if possible? looks like my setup (kinda)
and i'm waiting to order the Rogue Engineering stud kit until my wheels get here around May and i size out the front clearance. i'm guessing its a pretty straight forward install right?
and wheel and tire size for the CLK on LM's please if possible? looks like my setup (kinda)
Last edited by sweet jones; 03-26-2011 at 05:06 AM.
03-26-2011, 09:16 PM
#950
SPONSOR/MBworld Guru
Roland, gonna thread jack you lol. Anyone wants to buy that double din CF plate, shoot me a PM. Just won it at the Mercedes March Madness raffle. Same one Roland has. Full replacement piece, not just an overlay.
