Just Rollnnn.... evolution of another W203..
#951
MBWorld Fanatic!
Thread Starter
was wondering.. is that a Vorsteiner spoiler on James' CLK?
and i'm waiting to order the Rogue Engineering stud kit until my wheels get here around May and i size out the front clearance. i'm guessing its a pretty straight forward install right?
and wheel and tire size for the CLK on LM's please if possible? looks like my setup (kinda)
and i'm waiting to order the Rogue Engineering stud kit until my wheels get here around May and i size out the front clearance. i'm guessing its a pretty straight forward install right?
and wheel and tire size for the CLK on LM's please if possible? looks like my setup (kinda)
LM's are 19x8.5 and 19x9.5, dont know the offsets though. He is running a spacer on front and rear just dont know the sizing either..
#952
MBWorld Fanatic!
Thread Starter
Ive had a cel on since about the beginning of last summer. I forgot what code i was getting, but it was basically saying im running too lean. I had Serge check it and his computer said i had a bad downstream O2 sensor. I never had it changed since i read a thread saying people have been getting the same cel with the Kleeman Header and have changed out the sensor only to get the cel again.
Another thread came along saying you have to get the defouler/spacer from Cory at Kleeman and it should take care of it. Well i contacted Cory, he sent it to me free of charge, took the car down to Steve at Cypress muffler this past Sat. and had it installed. After driving a couple miles, the cel went away on its own and has not come back....
Another thread came along saying you have to get the defouler/spacer from Cory at Kleeman and it should take care of it. Well i contacted Cory, he sent it to me free of charge, took the car down to Steve at Cypress muffler this past Sat. and had it installed. After driving a couple miles, the cel went away on its own and has not come back....
#953
MBWorld Fanatic!
Ive had a cel on since about the beginning of last summer. I forgot what code i was getting, but it was basically saying im running too lean. I had Serge check it and his computer said i had a bad downstream O2 sensor. I never had it changed since i read a thread saying people have been getting the same cel with the Kleeman Header and have changed out the sensor only to get the cel again.
Another thread came along saying you have to get the defouler/spacer from Cory at Kleeman and it should take care of it. Well i contacted Cory, he sent it to me free of charge, took the car down to Steve at Cypress muffler this past Sat. and had it installed. After driving a couple miles, the cel went away on its own and has not come back....
Another thread came along saying you have to get the defouler/spacer from Cory at Kleeman and it should take care of it. Well i contacted Cory, he sent it to me free of charge, took the car down to Steve at Cypress muffler this past Sat. and had it installed. After driving a couple miles, the cel went away on its own and has not come back....
#954
MBWorld Fanatic!
Join Date: Feb 2009
Location: fort worth, tx
Posts: 5,054
Likes: 0
Received 10 Likes
on
8 Posts
06 C230 SS 6spd
yeah thats usually the norm with headers after install. I know with alot of racer header(s) you'll need a defouler or spacer. You can actually make from oreilys for like 5 bucks. you just need to get to different defoulers, one with the normal size o2 sensor size then a smaller outlet one that connects to the header, so its a stacked. But you getting it free is the best lol..
#955
Super Member
Join Date: Feb 2009
Location: Seattle
Posts: 676
Likes: 0
Received 1 Like
on
1 Post
W209, E46 M3 (dead), S54 swapped E46 Touring
Yes that is the Vorsteiner spoiler. It looks really nice on the w209.. Stud conversion should be pretty straight forward, although i didnt do mine, had a shop do it for me.
LM's are 19x8.5 and 19x9.5, dont know the offsets though. He is running a spacer on front and rear just dont know the sizing either..
LM's are 19x8.5 and 19x9.5, dont know the offsets though. He is running a spacer on front and rear just dont know the sizing either..
thank you roland. sorry for all of the question it was just nice to see a car in a similar style as mine.
you guys probably like this video.
http://www.youtube.com/watch?v=pIvxaDThqWs
#956
MBWorld Fanatic!
Thread Starter
I spoke to soon about the CEL going away. a couple days after adding the spacer it came back on and i am getting these 3 codes. i dont know if its a problem with my scanner but im getting p0171 twice.
P0171, System too lean (bank 1)
P0420, catalyst system, efficiency below threshold (bank 1)
P0171, system too lean (bank 1)
P0171, System too lean (bank 1)
P0420, catalyst system, efficiency below threshold (bank 1)
P0171, system too lean (bank 1)
#957
MBWorld Fanatic!
Thread Starter
i also just noticed this. Looks like oil is leaking from the cam sensors i think?? I added the extensions awhile ago. Do i just replace those sensors??
Thanks!
sorry for crappy phone pic.
Thanks!
sorry for crappy phone pic.
#959
MBWorld Fanatic!
Thread Starter
Thanks Henry.
My next mod, shouldve been done by now, but unfortunately, it wont be my next mod anymore. Ive been wanting to CF wrap my hood vent. But not my original one a spare one. So i bought one and while en route to my cf person overseas the piece broke. Figured id buy another one, while usps had it, they broke this one too. Probably go for a third, but i have to find another one first, not sure when that will happen. So for now, i will probably do something else, just not sure what...
My next mod, shouldve been done by now, but unfortunately, it wont be my next mod anymore. Ive been wanting to CF wrap my hood vent. But not my original one a spare one. So i bought one and while en route to my cf person overseas the piece broke. Figured id buy another one, while usps had it, they broke this one too. Probably go for a third, but i have to find another one first, not sure when that will happen. So for now, i will probably do something else, just not sure what...
![](http://img824.imageshack.us/img824/876/img00335201104161116.jpg)
#960
Junior Member
Join Date: Aug 2009
Location: Vancouver, Canada
Posts: 53
Likes: 0
Received 1 Like
on
1 Post
2006 C280 4Matic, 2011 E92 335i
Ah, I see. Cf wrapping the vent is a good idea. And yes, USPS is the crappiest shipping company I know.
I guess it's hard to decide what mod to do next when your car basically has everything a w203 could want haha
I guess it's hard to decide what mod to do next when your car basically has everything a w203 could want haha
#964
MBWorld Fanatic!
Thread Starter
lol, not everything... still a lot of stuff have in mind for her..
#965
MBWorld Fanatic!
Thread Starter
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
i thought about the cf hood, but probably wont. If i do, i would paint most of it white and just leave a small portion up top cf...
do they make a cf trunk for the w203? i don't think i would do it anyways, i like the trunk spoiler i have too much... and thanks, but not so sure about that, there are a lot of really nice w203's in this forum...
#966
MBWorld Fanatic!
Thread Starter
#969
Senior Member
(Last picture) my eyes looked at ur open trunk with your big lip before I looked at the lambo doors LOL
#975
Super Member
Join Date: Mar 2009
Location: Dunstable, ,Ma
Posts: 912
Likes: 0
Received 0 Likes
on
0 Posts
Nowhere ...Fast