Just Rollnnn.... evolution of another W203..
#1051
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
siiick, Roland!
btw, did the digital electronic climate control work for you? Steve tried it on mine back in the day and it didn't work properly.
btw, did the digital electronic climate control work for you? Steve tried it on mine back in the day and it didn't work properly.
#1052
MBWorld Fanatic!
ya man I got an '07 R1...aka simply found something else to dump my money it I guess, lol...replaced all my lines with SS, put in new metal attractive brake fluid resevoirs, painted my rotors to match the gold I painted the calipers on my car, took all the decals off of it, put in some HIDs (which I swear are brighter than my car! which is great since she came with projectors for the low beams anyway) and I gutted my exhaust and de-catted it...
Also went to replace my rotors and pads the other day (since noone in my area can grind x-drilled rotors apparently), so I ordered some EBC rotors for the front from amazon because EBC said this particular rotor wouldnt fit my car. So I call them and ask them why 3 different vendors online said this model would fit my car but they're site doesn't, he asked me for the part number and then exclaimed that their website is wrong and it would fit my car. So what did i do? I went ahead and bought them from the cheaper vendor...
Low and behold I spent an hour alone just trying to get the old calipers and rotors off, since the damn things were frozen stiff, and put on the new rotors, all greased up with anti-seize, go to put on the calipers and notice that their remained about an inch gap of free space between the back of the caliper and the end of the rotor, lol...so i pull it off and put it on top of the rotor i took off an sure enough, its about an inch in radius smaller!!!!! FML
Luckily I was able to come across a rubber mallet to get my rotors off so i didnt damage them too bad and was able to put them back on and luckily I only got one rotor off before I moved on to the next, haha
How much those stoptechs put you back by the way? like 4-6k for the whole set, rotors, pads and all?
Also went to replace my rotors and pads the other day (since noone in my area can grind x-drilled rotors apparently), so I ordered some EBC rotors for the front from amazon because EBC said this particular rotor wouldnt fit my car. So I call them and ask them why 3 different vendors online said this model would fit my car but they're site doesn't, he asked me for the part number and then exclaimed that their website is wrong and it would fit my car. So what did i do? I went ahead and bought them from the cheaper vendor...
Low and behold I spent an hour alone just trying to get the old calipers and rotors off, since the damn things were frozen stiff, and put on the new rotors, all greased up with anti-seize, go to put on the calipers and notice that their remained about an inch gap of free space between the back of the caliper and the end of the rotor, lol...so i pull it off and put it on top of the rotor i took off an sure enough, its about an inch in radius smaller!!!!! FML
Luckily I was able to come across a rubber mallet to get my rotors off so i didnt damage them too bad and was able to put them back on and luckily I only got one rotor off before I moved on to the next, haha
How much those stoptechs put you back by the way? like 4-6k for the whole set, rotors, pads and all?
#1053
MBWorld Fanatic!
Thread Starter
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
#1054
MBWorld Fanatic!
Thread Starter
Thanks Phil, Yeah i got it to work, it was basically plug and play. I think if you use the latest model digital climate control, i believe it was made for the 06-07 car you should be fine...
#1055
MBWorld Fanatic!
Thread Starter
ya man I got an '07 R1...aka simply found something else to dump my money it I guess, lol...replaced all my lines with SS, put in new metal attractive brake fluid resevoirs, painted my rotors to match the gold I painted the calipers on my car, took all the decals off of it, put in some HIDs (which I swear are brighter than my car! which is great since she came with projectors for the low beams anyway) and I gutted my exhaust and de-catted it...
Also went to replace my rotors and pads the other day (since noone in my area can grind x-drilled rotors apparently), so I ordered some EBC rotors for the front from amazon because EBC said this particular rotor wouldnt fit my car. So I call them and ask them why 3 different vendors online said this model would fit my car but they're site doesn't, he asked me for the part number and then exclaimed that their website is wrong and it would fit my car. So what did i do? I went ahead and bought them from the cheaper vendor...
Low and behold I spent an hour alone just trying to get the old calipers and rotors off, since the damn things were frozen stiff, and put on the new rotors, all greased up with anti-seize, go to put on the calipers and notice that their remained about an inch gap of free space between the back of the caliper and the end of the rotor, lol...so i pull it off and put it on top of the rotor i took off an sure enough, its about an inch in radius smaller!!!!! FML
Luckily I was able to come across a rubber mallet to get my rotors off so i didnt damage them too bad and was able to put them back on and luckily I only got one rotor off before I moved on to the next, haha
How much those stoptechs put you back by the way? like 4-6k for the whole set, rotors, pads and all?
Also went to replace my rotors and pads the other day (since noone in my area can grind x-drilled rotors apparently), so I ordered some EBC rotors for the front from amazon because EBC said this particular rotor wouldnt fit my car. So I call them and ask them why 3 different vendors online said this model would fit my car but they're site doesn't, he asked me for the part number and then exclaimed that their website is wrong and it would fit my car. So what did i do? I went ahead and bought them from the cheaper vendor...
Low and behold I spent an hour alone just trying to get the old calipers and rotors off, since the damn things were frozen stiff, and put on the new rotors, all greased up with anti-seize, go to put on the calipers and notice that their remained about an inch gap of free space between the back of the caliper and the end of the rotor, lol...so i pull it off and put it on top of the rotor i took off an sure enough, its about an inch in radius smaller!!!!! FML
Luckily I was able to come across a rubber mallet to get my rotors off so i didnt damage them too bad and was able to put them back on and luckily I only got one rotor off before I moved on to the next, haha
How much those stoptechs put you back by the way? like 4-6k for the whole set, rotors, pads and all?
sorry to hear about your rotors man, that sucks! Its too bad that many of these shops dont know what will and wont fit our car...
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
#1056
Member
Join Date: Jan 2011
Location: Upstate New York
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
2005 Mercedes C230
haha, nah not ballin at all, now you on the other hand ![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
not too many problems really, just have to drive right. Angles on driveways and watching the road for potholes and debris. Been doing it since i was 16, even when i drive a regular height car/truck, i still angle on driveways without even thinking about it![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
not too many problems really, just have to drive right. Angles on driveways and watching the road for potholes and debris. Been doing it since i was 16, even when i drive a regular height car/truck, i still angle on driveways without even thinking about it
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
#1061
MBWorld Fanatic!
where did you get those bolts from? and are they nuts or bolts, cuz all i could ever find were that brand in nuts...did you do a convert?
#1062
MBWorld Fanatic!
Thread Starter
they are the muteki sr48 lug nuts in gold. I did the lug conversion couple years ago. I used to run red work lug nuts, but really wanted extended open ended lugs.
#1063
Super Member
Join Date: Oct 2008
Location: Austin, TX
Posts: 553
Received 0 Likes
on
0 Posts
07 C230 (sold) 2009 E63 AMG (SOLD), 2015 E 63 AMG S
Damn! everytime i visit this thread you car gets better and better. Im falling behind! haha looks stunning bro!
#1064
Super Moderator
#1065
Super Member
Join Date: Feb 2010
Location: Los Angeles, CA
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
2005 C320 Sport, 2010 C300 Sport
Dang Roland, I haven't checked in for a the longest time and now I see this... holy crap the electronic climate control makes me want to do one too. Lookin great man!
#1069
Senior Member
Join Date: Apr 2011
Location: Derby, KS
Posts: 258
Likes: 0
Received 10 Likes
on
9 Posts
2005 MB C230K Sport Sedan & 2011 MB C300
ROLLNNN - when you removed the clear bra, did it affect the paint any? things such as discoloration and such? And do you plan on installing another clear bra?
I've had mine on for 2 years and it's been definitely worth the money since I do A LOT of road trips in state, out of state and cross country.
I've had mine on for 2 years and it's been definitely worth the money since I do A LOT of road trips in state, out of state and cross country.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#1071
MBWorld Fanatic!
Thread Starter
Thanks everyone, i apreciate it!
Frank i thought you did the conversion?? if not those BBS lugs are sexy.. gotta do it!!!
Frank i thought you did the conversion?? if not those BBS lugs are sexy.. gotta do it!!!
#1072
MBWorld Fanatic!
Thread Starter
ROLLNNN - when you removed the clear bra, did it affect the paint any? things such as discoloration and such? And do you plan on installing another clear bra?
I've had mine on for 2 years and it's been definitely worth the money since I do A LOT of road trips in state, out of state and cross country.![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
I've had mine on for 2 years and it's been definitely worth the money since I do A LOT of road trips in state, out of state and cross country.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
I do not plan on putting another clear bra on. As many times as that thing has saved me, i dont really like how it turned yellow, also the scratches in it look really bad. But who knows, in a couple years i might be sorry i didnt...
Last edited by ROLLNNN; 02-11-2012 at 10:11 PM.
#1073
MBWorld Fanatic!
thats sweet man...ive never heard of anyone doing the stud conversion to be honest...just out of curiosity why do that?
#1074
Super Member
Join Date: Jun 2004
Location: Ponce Puerto Rico
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
SL500 2003 previous/ E350 2007 actually
Hi rollnnn!! Your car really rocks!! Will you help me to find a proper folding mirror for my car to follow your lead on retrofit!!
Thanks in advance!!
Thanks in advance!!
#1075