V6 Performance Packages
#1
Former Vendor of MBWorld
Thread Starter
Join Date: Nov 2007
Location: Dunellen, NJ
Posts: 717
Likes: 0
Received 1 Like
on
1 Post
Chrysler Crossfire
V6 Performance Packages
Our TVT250 thread has diminished, so here's a new one more to the point.
We NEED a C320 or C240 for product testing and fitting.
Volunteers will receive:
At cost pricing on parts
Free Installation
Free Dyno Tuning
First spot at future modifications
We've had several cars promise to come through and not. If you are serious about doing this, we will need the cost of the parts PREPAID.
We are aiming at a 20% increase in HP with a cost around 1300 (retail).
We are located in NJ and are looking to get this done ASAP.
Initial kit will include ECU tuning, Cold Air Intake, and upgraded injectors.
Please call us at: (732) 649-9597 or email to info@tvtdes********
We want these cars to have the power they deserve!
We NEED a C320 or C240 for product testing and fitting.
Volunteers will receive:
At cost pricing on parts
Free Installation
Free Dyno Tuning
First spot at future modifications
We've had several cars promise to come through and not. If you are serious about doing this, we will need the cost of the parts PREPAID.
We are aiming at a 20% increase in HP with a cost around 1300 (retail).
We are located in NJ and are looking to get this done ASAP.
Initial kit will include ECU tuning, Cold Air Intake, and upgraded injectors.
Please call us at: (732) 649-9597 or email to info@tvtdes********
We want these cars to have the power they deserve!
Trending Topics
#8
Former Vendor of MBWorld
Thread Starter
Join Date: Nov 2007
Location: Dunellen, NJ
Posts: 717
Likes: 0
Received 1 Like
on
1 Post
Chrysler Crossfire
We've gotten 25% gain on the Crossfire (M112), but I know a lot of people aren't sure if it will work with the C class eventhough it's the same engine. So we want to prove that it will. Only problem being getting a C class.
As for warranty, we will replace any broken parts that we installed or were broken by a direct link to the parts we installed. Like I said, we've had these on the Crossfire for about a year now and 0 issues, other then new rear tires sooner.
#12
Super Moderator
#13
MBWorld Fanatic!
aside from my computer tune, k&n's, and the one-off crank pulley a friend of mine made- there isn't much for it. probably won't be either since the engine wasn't around too long.
TVT- good luck in your tuning/development quest.
TVT- good luck in your tuning/development quest.
#16
Former Vendor of MBWorld
Thread Starter
Join Date: Nov 2007
Location: Dunellen, NJ
Posts: 717
Likes: 0
Received 1 Like
on
1 Post
Chrysler Crossfire
As long as it is installed by a competant shop and able to by dyno tuned, all I care is that it gets done.
You guys really need some more power. The Crossfire guys are spoiled.
#19
Super Member
Join Date: May 2006
Location: 02116
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
Is @ Home
#20
Member
Join Date: May 2008
Location: Bay Area
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
'07 C230
If you find a shop that would like to work with us, send me their contact info or send them ours and I'll extend the same deal.
As long as it is installed by a competant shop and able to by dyno tuned, all I care is that it gets done.
You guys really need some more power. The Crossfire guys are spoiled.
As long as it is installed by a competant shop and able to by dyno tuned, all I care is that it gets done.
You guys really need some more power. The Crossfire guys are spoiled.
#24
Member
Join Date: May 2008
Location: Bay Area
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
'07 C230