AVIC-F700BT questions
#1
Junior Member
Thread Starter
Join Date: Feb 2009
Location: Eugene, OR
Posts: 45
Received 0 Likes
on
0 Posts
'04 c230 Coupe, '09 SLK 55
AVIC-F700BT questions
I'm close to throwing down for the AVIC-F700BT. Can anyone chime in on the sound quality of BT phone sound quality?
Thanks
S.
Thanks
S.
#7
Junior Member
Join Date: Feb 2009
Location: Palmdale, Ca
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
2012 Azera
Trending Topics
#12
Junior Member
Thread Starter
Join Date: Feb 2009
Location: Eugene, OR
Posts: 45
Received 0 Likes
on
0 Posts
'04 c230 Coupe, '09 SLK 55
Yes, I'll be getting the steering wheel control as well. They say it takes two adapters to make everything function.
I'd love to know if anyone has installed the steering wheel function and are you able to scroll through ipod menus? Or other things it might or might not control.
thanks for the photos!
s.
I'd love to know if anyone has installed the steering wheel function and are you able to scroll through ipod menus? Or other things it might or might not control.
thanks for the photos!
s.
#13
MBWorld Fanatic!
Join Date: Aug 2006
Location: SoCal, Irvine
Posts: 3,020
Likes: 0
Received 0 Likes
on
0 Posts
Stage 2 C7 A6, QX60
I did not buy the steering wheel control adapters, but I know someone on the forum did it and check the AVIC thread and it's also on Youtube.
#14
Double-Din kit
[quote=yeuchau;3403762]![](http://img25.imageshack.us/img25/5328/p2052470gh8.jpg)
![](http://img99.imageshack.us/img99/8963/p2052471wg2.jpg)
Where did you get the parts for the double-din opening. I have a 2003 C320, intalled the F700bt, but the bezel right around the radio didn't fit properly. Seems to be a little too thick. Please let me know.
![](http://img25.imageshack.us/img25/5328/p2052470gh8.jpg)
![](http://img99.imageshack.us/img99/8963/p2052471wg2.jpg)
Where did you get the parts for the double-din opening. I have a 2003 C320, intalled the F700bt, but the bezel right around the radio didn't fit properly. Seems to be a little too thick. Please let me know.
#15
Check out http://avic411.com/ for good info.
#17
Kit
Thx for the reply. I used ADT-VA133 from installer.com. http://www.installer.com/item/display_item.php?it=adt-va133.
It doesn't go in all the way so it is elevated from the dash about half an inch. Looks like I need a bezel around the radio that is a bit thinner, primarily on top and bottem.
It doesn't go in all the way so it is elevated from the dash about half an inch. Looks like I need a bezel around the radio that is a bit thinner, primarily on top and bottem.