Steering wheel audio controls & Audio 10 CD

Feb 20, 2003 | 05:15 PM

DCX Engineer

Thread Starter

Member

Joined: Nov 2001

Posts: 210

Likes: 0

From: Toledo, Ohio

Steering wheel audio controls & Audio 10 CD

My car has been at the dealership for a few days and the tech is having difficulty re-configuring the steering wheel mounted audio controls. The Star Diag system will not recognize the steering wheel mounted controls. I assumed it would be an easy part to replace and would not need to be setup. The problem he is trying to resolve is the -/+ buttons acting like the up/down buttons. This means I have no -/+ controls and both sides do the same function. They replaced these buttons due to cracking. I have the Audio 10 CD. Has anyone heard of this problem?

Feb 20, 2003 | 05:45 PM

Lockbuster

Senior Member

Joined: Jul 2002

Posts: 330

Likes: 0

No probles here, Audio 10 CD working fine, steering wheel radio controls working fine also. Sorry about your problem.

Feb 20, 2003 | 05:57 PM

session

MBWorld Fanatic!

Joined: May 2002

Posts: 8,189

Likes: 1

From: SF

2007 VW GTI

I can't imagine that the Audio 10 has anything to do with the malfunctioning buttons, as it's only set to receive a signal over the D2B fiber loop.

Feb 20, 2003 | 09:11 PM

DCX Engineer

Thread Starter

Member

Joined: Nov 2001

Posts: 210

Likes: 0

From: Toledo, Ohio

It sounds like it may be a defective -/+ button assembly. Everything was fine until it was replaced. Thanks for the input.

Feb 21, 2003 | 05:55 PM

DCX Engineer

Thread Starter

Member

Joined: Nov 2001

Posts: 210

Likes: 0

From: Toledo, Ohio

The problem was a defective -/+ button assembly from MB. It has been replaced and everything is fine. My dealer even delivered the car to my house. I drove their 2002 E320 4Matic for 7 days and 965 miles.