Comand Problem
Thread Starter
Newbie
Joined: Apr 2003
Posts: 9
Likes: 0
Comand Problem
Looking for ideas/help. Last week took my 320 Wagon in for Service A and intermittent problem with COMAND, specifically the radio mode would fail. Dealer replaced a fiber optic connector which seemed to correct. Now in any mode, radio, CD, phone, NAVI the audio intermittently ceases for a brief period, then resumes. The unit is still rcving power as the screen remains illuminated and no malfunction code appears. Have an appt to take back in, but just wonder if anyone has experienced anything similar.
BTW, for some reason the board dropped my access as member CHKMTE and repeated efforts to restore failed-so I just re-registered as Avrex.
BTW, for some reason the board dropped my access as member CHKMTE and repeated efforts to restore failed-so I just re-registered as Avrex.
Senior Member
Joined: Dec 2002
Posts: 322
Likes: 75
From: USA
G63
comand
Try resetting the comand. Go into the diagnostics menu (mute, 1 and 3). Press all three buttons simultaneously for a couple seconds until the screen shows up. There is a place to reset the comand. I can't remember off hand which menu it's in but you should be able to figure it out.
John
John
Senior Member
Joined: May 2002
Posts: 343
Likes: 0
From: UK
E320 CDI Elegance auto
Re: comand
Originally posted by JW001
Try resetting the comand. Go into the diagnostics menu (mute, 1 and 3). Press all three buttons simultaneously for a couple seconds until the screen shows up. There is a place to reset the comand. I can't remember off hand which menu it's in but you should be able to figure it out.
John
Try resetting the comand. Go into the diagnostics menu (mute, 1 and 3). Press all three buttons simultaneously for a couple seconds until the screen shows up. There is a place to reset the comand. I can't remember off hand which menu it's in but you should be able to figure it out.
John
I have tried to bring up the diognistics menu on my comand using this. I am getting nothing.
