Finally finished the retrofit headlights for my c230
#1
Junior Member
Thread Starter
Join Date: Feb 2009
Location: Palmdale, Ca
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
2012 Azera
Finally finished the retrofit headlights for my c230
Started these a long *** time ago... got lazy and never finished them. Roommate got a car with hids and I remembered what I was missing.
FX45 bixenon projects, m45 shrouds with ccfl rings behind them
FX45 bixenon projects, m45 shrouds with ccfl rings behind them
#3
Junior Member
Thread Starter
Join Date: Feb 2009
Location: Palmdale, Ca
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
2012 Azera
#4
Junior Member
#7
Junior Member
Thread Starter
Join Date: Feb 2009
Location: Palmdale, Ca
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
2012 Azera
Trending Topics
#9
Junior Member
#14
Junior Member
Thread Starter
Join Date: Feb 2009
Location: Palmdale, Ca
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
2012 Azera
Honestly, not sure. I started them about 2 years back when I got the car... did all the install of the projectors themselves, etc... spent about 4 hours this weekend in finishing them off... attaching the bezels, doing all the wiring, etc.
#15
Junior Member
Thread Starter
Join Date: Feb 2009
Location: Palmdale, Ca
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
2012 Azera
#19
Senior Member
Join Date: Nov 2008
Location: Tampa/Lutz, FL.
Posts: 475
Likes: 0
Received 1 Like
on
1 Post
Correction, Drove An '05 C230 Kompressor SS
I've done 9 Retrofits in the last 6 years, I'm planning for This set to take the cake
#20
Senior Member
Join Date: Nov 2008
Location: Tampa/Lutz, FL.
Posts: 475
Likes: 0
Received 1 Like
on
1 Post
Correction, Drove An '05 C230 Kompressor SS
#22
Junior Member
Thread Starter
Join Date: Feb 2009
Location: Palmdale, Ca
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
2012 Azera
#23
Junior Member
Mll....
I scored a set of those outer housings (just like yours) but they're not projectors. (just clear).
How hard (really) was it to do the retrofit?
Could you write up a step-by-step DIY for this project?
If it's not too much of an undertaking, I may do it to this set (which are in pristine condition) before I install them in my car.
Let me know, puuuhlease.
I scored a set of those outer housings (just like yours) but they're not projectors. (just clear).
How hard (really) was it to do the retrofit?
Could you write up a step-by-step DIY for this project?
If it's not too much of an undertaking, I may do it to this set (which are in pristine condition) before I install them in my car.
Let me know, puuuhlease.
#24
Junior Member
Thread Starter
Join Date: Feb 2009
Location: Palmdale, Ca
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
2012 Azera
Mll....
I scored a set of those outer housings (just like yours) but they're not projectors. (just clear).
How hard (really) was it to do the retrofit?
Could you write up a step-by-step DIY for this project?
If it's not too much of an undertaking, I may do it to this set (which are in pristine condition) before I install them in my car.
Let me know, puuuhlease.
I scored a set of those outer housings (just like yours) but they're not projectors. (just clear).
How hard (really) was it to do the retrofit?
Could you write up a step-by-step DIY for this project?
If it's not too much of an undertaking, I may do it to this set (which are in pristine condition) before I install them in my car.
Let me know, puuuhlease.
Not having pictures taken along the way makes it awfully hard to do a good DIY. Check out the forums over at hidplanet and you'll likely find lots of DIYs for other cars. The concepts are all the same.