FS: Brabus Illuminated Shift Knob (Authentic+Custom)
Thread Starter
MBWorld Fanatic!
Joined: Jul 2005
Posts: 7,424
Likes: 3
From: New York City
C55 ///AMG, 535xi
FS: Brabus Illuminated Shift Knob (Authentic+Custom)
So, I have a Authentic, yet Custom Brabus R171 Illuminated Shift Knob.
I bought this a while ago, and once I bought my C55, I never used it. I recently found the shift knob while cleaning out my random car stuff and decided to give it an update. The original alcantara suede was kinda dirty and dusty after sitting in the garage for a bit too long. And of course, if My hands were sweaty, who would want a used shift knob like that!
Anyways, what was modified...
The original alcantara was removed, and replaced it with Carbon Fiber Fabric. it's wrapped 99% perfect because there is always room for improvement. The whole brushed silver was refinished, i took the whole shift knob apart, cleaned everything, wiped everything down. re-assembled everything. I also replaced the crappy LED that Brabus had included (yuck), it was a 0.01+/- watt LED powered with resistors.
I swapped it with a Nichia Chip, its 12v no resistors. High powered.
(http://www.nichia.co.jp/en/about_nichia/index.html)
You can see the beam spread below...
Of course, to make it original, it has to have that orange glow from the original shifter. I had to use 4 color swatches from RoscoLux Filter Gels to give it the same color as the original Brabus Shift Knob.
Why do I have all that equipment? Because I am a Lighting Designer, so the chip/filter is top notch.
Anyways, too long of a story. $180 obo.
Please note that the original shifter was $375, I'm open to offers, but if you're a low baller. Sorry!
I have to say, the B brabus logo is not in the best condition. But you can see from the pictures below.
I bought this a while ago, and once I bought my C55, I never used it. I recently found the shift knob while cleaning out my random car stuff and decided to give it an update. The original alcantara suede was kinda dirty and dusty after sitting in the garage for a bit too long. And of course, if My hands were sweaty, who would want a used shift knob like that!
Anyways, what was modified...
The original alcantara was removed, and replaced it with Carbon Fiber Fabric. it's wrapped 99% perfect because there is always room for improvement. The whole brushed silver was refinished, i took the whole shift knob apart, cleaned everything, wiped everything down. re-assembled everything. I also replaced the crappy LED that Brabus had included (yuck), it was a 0.01+/- watt LED powered with resistors.
I swapped it with a Nichia Chip, its 12v no resistors. High powered.
(http://www.nichia.co.jp/en/about_nichia/index.html)
You can see the beam spread below...
Of course, to make it original, it has to have that orange glow from the original shifter. I had to use 4 color swatches from RoscoLux Filter Gels to give it the same color as the original Brabus Shift Knob.
Why do I have all that equipment? Because I am a Lighting Designer, so the chip/filter is top notch.
Anyways, too long of a story. $180 obo.
Please note that the original shifter was $375, I'm open to offers, but if you're a low baller. Sorry!
I have to say, the B brabus logo is not in the best condition. But you can see from the pictures below.
Thread Starter
MBWorld Fanatic!
Joined: Jul 2005
Posts: 7,424
Likes: 3
From: New York City
C55 ///AMG, 535xi
thanks guys!, checked my PMs, sorry, will not ship out of the US as of now! and I'm not 100% sure if it fits 6 speeds, bc i remember reading a post that the 6 speeds have a shorter and fatter mount, so it probably will not fit!
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
MBWorld Fanatic!
Joined: Feb 2009
Posts: 5,537
Likes: 8
2006 C350 Sport 6MT
GLWS
Here is how the manual brabus shift knob looks like. Although I think Gary's should fit too
http://cgi.ebay.com/ebaymotors/Brabu...item1e670d748d
Here is how the manual brabus shift knob looks like. Although I think Gary's should fit too
http://cgi.ebay.com/ebaymotors/Brabu...item1e670d748d
Thread Starter
MBWorld Fanatic!
Joined: Jul 2005
Posts: 7,424
Likes: 3
From: New York City
C55 ///AMG, 535xi
Member
Joined: Oct 2007
Posts: 112
Likes: 0
From: Toronto, Canada
12 SLK55AMG 18 C43AMG 19GLC63sAMG
Brabus illuminated shift knob
So, I have a Authentic, yet Custom Brabus R171 Illuminated Shift Knob.
I bought this a while ago, and once I bought my C55, I never used it. I recently found the shift knob while cleaning out my random car stuff and decided to give it an update. The original alcantara suede was kinda dirty and dusty after sitting in the garage for a bit too long. And of course, if My hands were sweaty, who would want a used shift knob like that!
Anyways, what was modified...
The original alcantara was removed, and replaced it with Carbon Fiber Fabric. it's wrapped 99% perfect because there is always room for improvement. The whole brushed silver was refinished, i took the whole shift knob apart, cleaned everything, wiped everything down. re-assembled everything. I also replaced the crappy LED that Brabus had included (yuck), it was a 0.01+/- watt LED powered with resistors.
I swapped it with a Nichia Chip, its 12v no resistors. High powered.
(http://www.nichia.co.jp/en/about_nichia/index.html)
You can see the beam spread below...
Of course, to make it original, it has to have that orange glow from the original shifter. I had to use 4 color swatches from RoscoLux Filter Gels to give it the same color as the original Brabus Shift Knob.
Why do I have all that equipment? Because I am a Lighting Designer, so the chip/filter is top notch.
Anyways, too long of a story. $180 obo.
Please note that the original shifter was $375, I'm open to offers, but if you're a low baller. Sorry!
I have to say, the B brabus logo is not in the best condition. But you can see from the pictures below.
I bought this a while ago, and once I bought my C55, I never used it. I recently found the shift knob while cleaning out my random car stuff and decided to give it an update. The original alcantara suede was kinda dirty and dusty after sitting in the garage for a bit too long. And of course, if My hands were sweaty, who would want a used shift knob like that!
Anyways, what was modified...
The original alcantara was removed, and replaced it with Carbon Fiber Fabric. it's wrapped 99% perfect because there is always room for improvement. The whole brushed silver was refinished, i took the whole shift knob apart, cleaned everything, wiped everything down. re-assembled everything. I also replaced the crappy LED that Brabus had included (yuck), it was a 0.01+/- watt LED powered with resistors.
I swapped it with a Nichia Chip, its 12v no resistors. High powered.
(http://www.nichia.co.jp/en/about_nichia/index.html)
You can see the beam spread below...
Of course, to make it original, it has to have that orange glow from the original shifter. I had to use 4 color swatches from RoscoLux Filter Gels to give it the same color as the original Brabus Shift Knob.
Why do I have all that equipment? Because I am a Lighting Designer, so the chip/filter is top notch.
Anyways, too long of a story. $180 obo.
Please note that the original shifter was $375, I'm open to offers, but if you're a low baller. Sorry!
I have to say, the B brabus logo is not in the best condition. But you can see from the pictures below.
I have recently bought the same Brabus illuminated shift knob in leather. Have no problem with installation. However, I agree with you that the light is dim and too yellow for my liking. I read that you have switched to a brighter light. I have dismantled the top 2 screws under the plastic lens covering the light of the shift knob, but not too sure how to remove the top of the shift knob. seems to be quite rigid. Also, I followed your website suggestion about a replacement light, but was not sure what to get. Please advise.
