need help.. Coolant Check Level, is on
#1
Newbie
Thread Starter
Join Date: Sep 2012
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2006 c230 sport
need help.. Coolant Check Level, is on
when i start the car the radiator fan kicks on high, and on the instrument cluster display it says, Coolant check level.. please help
#2
MBWorld Fanatic!
Join Date: Feb 2009
Location: fort worth, tx
Posts: 5,054
Likes: 0
Received 10 Likes
on
8 Posts
06 C230 SS 6spd
have you checked the coolant level? is the car running hot. you might need to add coolant and use the recommended MB coolant. if the coolant level is fine then check your thermostat, it might not be opening
#4
Newbie
Thread Starter
Join Date: Sep 2012
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2006 c230 sport
I checked coolant level and topped it off still need to check thermostat...
Carsy ? I also changed the windshield washer fluid sensor and topped it off..
Still having the same problem. I wonder if i have to much air in the coolant, cus my bro has a bmw and his fan once was kicking on high until he bleed the air out.. My ? is how do u bleed the air out the mb. i hope i don't need special tool..
Carsy ? I also changed the windshield washer fluid sensor and topped it off..
Still having the same problem. I wonder if i have to much air in the coolant, cus my bro has a bmw and his fan once was kicking on high until he bleed the air out.. My ? is how do u bleed the air out the mb. i hope i don't need special tool..
#6
MBWorld Fanatic!
The thermostat should fail open.
If the engine is not running hot it may be caused by faulty sensors. Check for codes .
If the engine is not running hot it may be caused by faulty sensors. Check for codes .
#7
Newbie
Thread Starter
Join Date: Sep 2012
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2006 c230 sport
Yesterday i noticed that the air tempture inside was blowing warm and whould not blow hot, so that leads to one thing, the thermostat. i guess it keeps sticking or its closed like phister said.
I got a new thermostat from MB dealer, and a new temp sensor. I also borrowed a snap-on air bleeder tool for the coolant. I will be fixing it tonight, hope it works.
I got a new thermostat from MB dealer, and a new temp sensor. I also borrowed a snap-on air bleeder tool for the coolant. I will be fixing it tonight, hope it works.