the front endlink i got IS 12mm for sure...
it didn't fit to TEIN strut and we had to use dremel to make it fit perfectly...
the question remaining is the rear...

the front links on my car is 203-320-28-89

and on OEMPARTSDIRECT, the description says,

Front Suspension-Stabilizer bar-Link, Link c240, c320, c32 - w/o 4matic


the ones you have MJ,

203-320-29-89

on OEMPARTSDIRECT, description says....

Front suspension-stabilzer bar-link, Link c240 wagon- w/o 4matic, c320 wagon w/o 4matic



I'm taking a wild guess, all V6+ cars have the 12mm endlinks, and 4 cylinder has 10mm endlinks.

not exactly...
i have c240 and i had 10mm endlinks...

thats weird... I dont know whats going on, I guess I'll have to see tomorow morning at the shop

Gary i didnt find the Washer thingie Sorry....


i have a set BRAND NEW Front & Rear H&R Teflon Sway Bar Bushings For sale

D-Day 1

My 2003 C320 (V6) had 10mm endlinks.
I had them bored to 12mm to fit the AMG sways.

My 2004.5 C320 (V6) has 12mm endlinks with AMG sways standard.

Carlos

Saprissa@aol.com

hmm....

that is weird....according to the part#s, its amg endlinks

once josefina removes stock endlinks tomorrow, i'll post pics and part # for comparison...

great!,

i'm gonna install them anyways, well, see if they can install it

I have heard from many, with 10mm endlinks, they installed these 12mm sway bars anyways, and bolted them tight. no squeeks no nothing.

Saw mj's endlinks tonight. They're definitely the right ones, so the 28 part number must be correct.

We'll see.

so the ones MJ have are 28 or 29? I have 28,

The ones mj got are 28 because I gave the part number him and I got that number from flip and when I looked at them tonight, they were definitely wider than the 10mm. I could clearly see it when flip showed me the 10mm ones.

hmmm...well have the 28, MJ posted up "29" as the part # he got.

well, its 8:30 here in the east coast, and I'm heading to the shop

wish me luck!

drex, check ur pda... the part # u gave me was 29...
i know it's 12mm cuz it would not go thru tein strut with using dremel...

Gary just called me up from the shop and told me that his car came with stock AMG sway bars

How come my c230k did not come with AMG sway bars?

Sigh, I told you guys :\ - my car came with stock AMGs but I've been through so many suspension changes, I have to do the dremeling mod =).

ok back from the shop.


apparently my car came with amg sway bars/bushings/endlinks.

the endlinks are 12mm endlinks, we measured it,

sway bars, we took them off, they were the same exact ones that I have posted up, even with the pre-attached poly urethane bushings!

they measure 22mm front, 12mm holes

rear is the same as well, measured 16mm thick.

I apparently have AMG SWAY BARS ON MY CAR!

now i guess im going for eibach

lol... u will need to use dremel on eibach sway...

Oops...my bad. MJ is right. It's 29.

that is a bit weird...

after removing the stock sway bar, I placed it next to the AMG ones, they were exactly the same, just that my stock ones were dirty.


isnt that weird...I have stock AMG sway bars!

so does josefina...

But she switched to H&R. You know how she likes it... the thicker the better!

font amg sway has been installed! rear is to be installed later this week.
thx to josefina... otherwise, it would've been worse...
steering feels much firmer now...

front endlinks...
10mm vs 12mm