MJ50's W203 Mod Fever (OEM Retrofits)
Newbie
Joined: Mar 2003
Posts: 22
Likes: 0
From: Las Vegas, NV
2002 c230 sport coupe
So mj50, you used #4pads all around or just in the rears? And I'm assuming that's to make it more even with the front? Sorry, a little confused about the pads.
Also, where did you get it installed if you don't mind me asking. Thanks.
Also, where did you get it installed if you don't mind me asking. Thanks.
Thread Starter
Super Moderator
Joined: Jul 2003
Posts: 22,075
Likes: 980
From: MBworld
bone stock E55 AMG
i used #4 pads for the rear... there are no spring pads on the fronts... yes, if u don't change the pads, the rear will have no gap while the front does... i got mine installed at TWS...
Originally posted by cruznlv
So mj50, you used #4pads all around or just in the rears? And I'm assuming that's to make it more even with the front? Sorry, a little confused about the pads.
Also, where did you get it installed if you don't mind me asking. Thanks.
So mj50, you used #4pads all around or just in the rears? And I'm assuming that's to make it more even with the front? Sorry, a little confused about the pads.
Also, where did you get it installed if you don't mind me asking. Thanks.
Thread Starter
Super Moderator
Joined: Jul 2003
Posts: 22,075
Likes: 980
From: MBworld
bone stock E55 AMG
haha...
i may get flat badge and CL grille later, but i like the star right now...
i may get flat badge and CL grille later, but i like the star right now...
Originally posted by AMG BRED
very nice.. now get a flat MB badge and a blacked out grille.
very nice.. now get a flat MB badge and a blacked out grille.
Newbie
Joined: Mar 2003
Posts: 22
Likes: 0
From: Las Vegas, NV
2002 c230 sport coupe
Originally posted by mj50
i used #4 pads for the rear... there are no spring pads on the fronts... yes, if u don't change the pads, the rear will have no gap while the front does... i got mine installed at TWS...
i used #4 pads for the rear... there are no spring pads on the fronts... yes, if u don't change the pads, the rear will have no gap while the front does... i got mine installed at TWS...
MBWorld Fanatic!
Joined: Nov 2003
Posts: 1,074
Likes: 0
From: Los Angeles
W209
Looks good. I thought the cup kit would lower the car even more, but you do have very thick spring pads. are you planning to replace the spring pad anytime soon. I would look awsome if the there are no gaps between the tires and the fenders. But it looks good already. 
Thread Starter
Super Moderator
Joined: Jul 2003
Posts: 22,075
Likes: 980
From: MBworld
bone stock E55 AMG
actually i like the drop now...
not too low and still sporty...
pretty good ground clearance...
i hope the springs won't settle down too much...
not too low and still sporty...
pretty good ground clearance...
i hope the springs won't settle down too much...
Originally posted by BrabusClK04
Looks good. I thought the cup kit would lower the car even more, but you do have very thick spring pads. are you planning to replace the spring pad anytime soon. I would look awsome if the there are no gaps between the tires and the fenders. But it looks good already.
Looks good. I thought the cup kit would lower the car even more, but you do have very thick spring pads. are you planning to replace the spring pad anytime soon. I would look awsome if the there are no gaps between the tires and the fenders. But it looks good already.
MBWorld Fanatic!
Joined: Jan 2004
Posts: 2,853
Likes: 1
From: Boston
CLK500/Range Rover HSE/E55 AMG/Bmw 328Xi coupe/BMW 4.8x/Bmw 335i/GS350/Audi S5/E350
Any of u ever head of I-bach springs...i heard that will lower your car in the front about an inch or so....any thoughts?
Newbie
Joined: Apr 2004
Posts: 13
Likes: 0
From: Bay Area
C230k sedan
Originally posted by vadim
Pad #4 is the thickest. To lower it more, one needs #1.
Pad #4 is the thickest. To lower it more, one needs #1.
i was wondering though, if it's possible to put #1's in the front and #4s in the rear? to give it a better stance...(the front is a little bit higher than the rear)?? any pictures with the #1's all around?
thanks in advance
Thread Starter
Super Moderator
Joined: Jul 2003
Posts: 22,075
Likes: 980
From: MBworld
bone stock E55 AMG
there are no front pads for w203...
Originally posted by C-hris ClasS
Nice ride,
i was wondering though, if it's possible to put #1's in the front and #4s in the rear? to give it a better stance...(the front is a little bit higher than the rear)?? any pictures with the #1's all around?
thanks in advance
Nice ride,
i was wondering though, if it's possible to put #1's in the front and #4s in the rear? to give it a better stance...(the front is a little bit higher than the rear)?? any pictures with the #1's all around?
thanks in advance
Newbie
Joined: Apr 2004
Posts: 13
Likes: 0
From: Bay Area
C230k sedan
sorry i misread the settings..im thinking about lowering mine...but for some reason i want the front to be a little lower than the backs? any suggestions for me..i like h&r's tho..
so the rides pretty much stock?
so the rides pretty much stock?
Thread Starter
Super Moderator
Joined: Jul 2003
Posts: 22,075
Likes: 980
From: MBworld
bone stock E55 AMG
only with coilover, u can drop front more...
yes, cup kit rides like stock...
yes, cup kit rides like stock...
Originally posted by C-hris ClasS
sorry i misread the settings..im thinking about lowering mine...but for some reason i want the front to be a little lower than the backs? any suggestions for me..i like h&r's tho..
so the rides pretty much stock?
sorry i misread the settings..im thinking about lowering mine...but for some reason i want the front to be a little lower than the backs? any suggestions for me..i like h&r's tho..
so the rides pretty much stock?
