1st Step of M271 Pulley Kit development Complete!
#76
Super Member
Join Date: Apr 2003
Location: Las Vegas
Posts: 792
Likes: 0
Received 1 Like
on
1 Post
2003 C230 K , 2001 ML320
"I AM IN"
From what I can determine a 2.5 PSI boost from 11 to 13.5 PSI will increase flow by 20-25 CFM across entire RPM band. At top engine revs the heat to the intercooler will increase by 20-25 degrees, and the power to drive the supercharger at top engine RPM by 15 HP!
Where this kit will really shine is from 3000 to 5500 engine RPM. The volumetric efficiency increases by over 5% in these RPM ranges, but goes away totally at 6000+!
To illustrate the biggest problem, the MP45 Eaton adds 125 degrees at 5 PSI boost, 185 degrees at 11 PSI boost, and 215 degrees at 13.5 PSI boost at maximum engine RPM! This almost doubling of temp to the intercooler from the M111 engine to a hopped up M271 that uses the same IC.
From what I can determine a 2.5 PSI boost from 11 to 13.5 PSI will increase flow by 20-25 CFM across entire RPM band. At top engine revs the heat to the intercooler will increase by 20-25 degrees, and the power to drive the supercharger at top engine RPM by 15 HP!
Where this kit will really shine is from 3000 to 5500 engine RPM. The volumetric efficiency increases by over 5% in these RPM ranges, but goes away totally at 6000+!
To illustrate the biggest problem, the MP45 Eaton adds 125 degrees at 5 PSI boost, 185 degrees at 11 PSI boost, and 215 degrees at 13.5 PSI boost at maximum engine RPM! This almost doubling of temp to the intercooler from the M111 engine to a hopped up M271 that uses the same IC.
#78
Super Moderator
Originally Posted by Sauceboy01
Also I spoke to Vadim today about affordability, and EVOSPORT is going to make this kit VERY VERY affordable (hence we are afterall driving an entry level car)
#82
MBWorld Fanatic!
Originally Posted by BabyBenz6spd
I NEED MORE HP!! (and TQ), I AM IN!!
I'm tired of being over taken by Buicks :p
I'm tired of being over taken by Buicks :p
#83
Super Moderator
Originally Posted by vadim
Just drive faster! No Buick will dare to overtake you then
#84
MBWorld Fanatic!
Thread Starter
Originally Posted by UStifosi
It worked in my Subaru so it has to work in my Mercedes.
Now that's sound logic.
Now that's sound logic.
I'm just saying that I'm willing to modify my car, regardless of possible issues if the tuner is right and they release a tested product, which in this case, it is going to be!
Please keep your idiocracies to yourself.
Thank you!
-Danny
#86
MBWorld Fanatic!
Join Date: May 2002
Location: The blue white rock, third out.
Posts: 2,916
Likes: 0
Received 1 Like
on
1 Post
2002 C230 Coupe(M111)
Originally Posted by UStifosi
It worked in my Subaru so it has to work in my Mercedes.
Now that's sound logic.
Now that's sound logic.
Cluck Cluck Cluck. Again, iyou don't have to install this on your car. You're free to play it safe, drive 20 under in the slow lane, re-elect GW, and never take a chance in life. Enjoy. How did you ever get into a Mercedes Benz? Modding cars is a BILLIONS A YEAR business. Obviously, a lot of people are not afraid to mod their cars. They shouldn't be...its just a machine after all.
Why get all alarmist on him...just think, if it blows up, you can sit back all smug and say "I told you so". Now, that should make your little heart happy, eh?
#87
MBWorld Fanatic!
Join Date: May 2002
Location: The blue white rock, third out.
Posts: 2,916
Likes: 0
Received 1 Like
on
1 Post
2002 C230 Coupe(M111)
Originally Posted by nlpamg
seriously man! how many buicks are out there these days anyway? I hardly see them anymore...
Drive an ES300, you'll agree its the best Buick ever :p
#89
Almost a Member!
Join Date: Jan 2003
Location: Scottsdale, Arizona
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
2002 996TT,2004 996 C2,2005 C230K
I"M IN.
Though, I'm with UStifosi on a warranty issue...Porsche does the same thing...on the first day I started mods on my 996TT I sad bye-bye to the warranty,even a simple chip will void it.
Regards,
Serg
Though, I'm with UStifosi on a warranty issue...Porsche does the same thing...on the first day I started mods on my 996TT I sad bye-bye to the warranty,even a simple chip will void it.
Regards,
Serg
#90
Guest
Posts: n/a
Originally Posted by Sauceboy01
Alright, these are the Group Buy potentials so far. If you want to be added just post "I AM IN"
1.CitronC230k 03
2.Scottisha
3.JakeSnake
4.nlpamg
5.kiketron
6.breastroker
7.xxbenzc230kxx
8.mctwin2kman
9.tyro ??
1.CitronC230k 03
2.Scottisha
3.JakeSnake
4.nlpamg
5.kiketron
6.breastroker
7.xxbenzc230kxx
8.mctwin2kman
9.tyro ??
15-25 HP for $1000 USD, I am definitely in.
The more and more stuff like this comes out the more I consider keeping the C230. I wanted to trade to a CLK320, yet the modding potential may keep me interested in my current car.
We need more NA tuners to get involved on this engine, otherwise its trade-up to the 320 time.
#91
MBWorld Fanatic!
Thread Starter
well, last i spoke w/ evosport they were shooting for a bit over 40-45 whp. w/ an intake kit and powerchip.
Anyway, all this isn't guaranteed until we get some testing done, which will probably take place in a couple of weeks. Once again, i'll keep you all posted.
-Danny
Anyway, all this isn't guaranteed until we get some testing done, which will probably take place in a couple of weeks. Once again, i'll keep you all posted.
-Danny
#93
Originally Posted by taylor192
I AM IN
15-25 HP for $1000 USD, I am definitely in.
The more and more stuff like this comes out the more I consider keeping the C230. I wanted to trade to a CLK320, yet the modding potential may keep me interested in my current car.
We need more NA tuners to get involved on this engine, otherwise its trade-up to the 320 time.
15-25 HP for $1000 USD, I am definitely in.
The more and more stuff like this comes out the more I consider keeping the C230. I wanted to trade to a CLK320, yet the modding potential may keep me interested in my current car.
We need more NA tuners to get involved on this engine, otherwise its trade-up to the 320 time.
I spoke to my Eaton wholesaler and they make pulleys from scratch.
#95
Senior Member
Join Date: Mar 2003
Location: Stamford, CT
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230
SauceBoy, can you list all the items in the kit required for the 40+ whp?
And what the estimated $$ cost will be? How will customers far way from evosport install such a kit?
Thanks
CZ
Thanks
CZ
#96
MBWorld Fanatic!
Thread Starter
Originally Posted by miroj
Why $1000 for one pulley ? ...... they are only worth $150 - $300 at most.
I spoke to my Eaton wholesaler and they make pulleys from scratch.
I spoke to my Eaton wholesaler and they make pulleys from scratch.
-Danny
#97
MBWorld Fanatic!
Thread Starter
Originally Posted by czachari
And what the estimated $$ cost will be? How will customers far way from evosport install such a kit?
Thanks
CZ
Thanks
CZ
All i know right now in regards to price is that it's going to be cheaper then anything else in the market. That's it for now. Sorry guys.
-Danny
#98
MBWorld Fanatic!
Originally Posted by Sauceboy01
All i know right now in regards to price is that it's going to be cheaper then anything else in the market. That's it for now. Sorry guys.
-Danny
-Danny
#99
Gentlemen, here is the latest:
OverDrive Pulleys Kit (ODPS), will consist of following:
1. New, larger damper crank pulley. The exact size is still in development. It will be a brand new, not modified stock, damper. Very much like our E55 damper. www.evosport.com
2. Smaller water pump pulley, to clear larger crank damper.
3. Larger alternator pulley, to compensate for larger crank damper.
I am expecting around 20-25HP and 15-20TQ from about 2 to 2.5 psi increase. With software and better intake we could see 185-190 RWHP.
Pricing information and dyno graphs will be follow shortly. Thank you for your interest.
OverDrive Pulleys Kit (ODPS), will consist of following:
1. New, larger damper crank pulley. The exact size is still in development. It will be a brand new, not modified stock, damper. Very much like our E55 damper. www.evosport.com
2. Smaller water pump pulley, to clear larger crank damper.
3. Larger alternator pulley, to compensate for larger crank damper.
I am expecting around 20-25HP and 15-20TQ from about 2 to 2.5 psi increase. With software and better intake we could see 185-190 RWHP.
Pricing information and dyno graphs will be follow shortly. Thank you for your interest.
#100
Originally Posted by Vadim @ evosport
Gentlemen, here is the latest:
OverDrive Pulleys Kit (ODPS), will consist of following:
1. New, larger damper crank pulley. The exact size is still in development. It will be a brand new, not modified stock, damper. Very much like our E55 damper. www.evosport.com
2. Smaller water pump pulley, to clear larger crank damper.
3. Larger alternator pulley, to compensate for larger crank damper.
I am expecting around 20-25HP and 15-20TQ from about 2 to 2.5 psi increase. With software and better intake we could see 185-190 RWHP.
Pricing information and dyno graphs will be follow shortly. Thank you for your interest.
OverDrive Pulleys Kit (ODPS), will consist of following:
1. New, larger damper crank pulley. The exact size is still in development. It will be a brand new, not modified stock, damper. Very much like our E55 damper. www.evosport.com
2. Smaller water pump pulley, to clear larger crank damper.
3. Larger alternator pulley, to compensate for larger crank damper.
I am expecting around 20-25HP and 15-20TQ from about 2 to 2.5 psi increase. With software and better intake we could see 185-190 RWHP.
Pricing information and dyno graphs will be follow shortly. Thank you for your interest.