License Bulb?
#26
Member
Thread Starter
Join Date: Jan 2008
Location: New York
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
'08C300 White w P2,MM,Pano
you went through all those steps? thats determination man! did you encounter any problems? When i changed it on my other car, you popped the lamp out front the outside of the car. I was thinking of just poping the glass off the front, did you see any pins there that holds the glass in? or is the long way, the only way?
#27
Out Of Control!!
Join Date: Nov 2005
Location: OC
Posts: 18,677
Likes: 0
Received 9 Likes
on
9 Posts
a quarter mile at a time
if the W204 is anything like the W203, it will be a pain to get anything other than the stock W5W bulbs working. Most aftermarket superwhite bulbs are 10W and will melt the plastic housings. The HOEN bulbs work ok, but some people have had problems with them as well (myself included). LED's have had thier share of problems from tracking down the correct resistors needed to eliminate the bulb out warning, to them burning out very quickly (less than 1mo), to constant flickering.
Good luck guys and hope you guys have it easier than we did!
Good luck guys and hope you guys have it easier than we did!
#28
There ARE pins that hold the housing and the glass/plastic cover from the inside, which is why you have to go thru so many procedures. I don't find the bulb lamp warning much of a nuisance, so it isn't a big problem at all. We'll just have to see how long these things last untill they burn out...
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
#29
Senior Member
Join Date: Feb 2008
Location: New England
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
CLS63
FINALLY installed, or tried to anyays, my Hoen plate light bulbs today. When I first turned on the parking lamp switch, both lights illuminated. After a second one blinked on and off, and I received a dash display bulb out alert. I returned my stock bulbs to the harness and reinstalled my deck-lid liner. I just order resistors online and will update you guys when I get them next week. I hope this works. I LOVE the look of the LEDs on the newer Lexus'.
#31
Junior Member
Join Date: Mar 2008
Location: Wellington NZ
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
2020 GLE 400 D and a 2024 EQE 350SUV
I preume you mean the Licence plate bulbs on the C (W204)
Im trying to upload 2 pages from the WIS manual for you.
Basically you need to remove the Trunk lid handle assy to get access to the bulb from behind.
Hope this helps.
Cheers
Quinni
Im trying to upload 2 pages from the WIS manual for you.
Basically you need to remove the Trunk lid handle assy to get access to the bulb from behind.
Hope this helps.
Cheers
Quinni
#34
MBWorld Fanatic!
if you are worried about the potential problems with using LED bulbs, why not get a pair of Polarg B1-Hybrid Hyper White M-4 bulbs instead?
GPI has these bulbs for the headlight eyebrows and it looks very nice:
GPI has these bulbs for the headlight eyebrows and it looks very nice:
#35
Senior Member
Join Date: Jun 2003
Location: Los Angeles
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
2008 C300 Sport Sedan: Panarama Roof, P2, Multimedia
#36
Senior Member
Join Date: Feb 2008
Location: New England
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
CLS63
https://mbworld.org/forums/showthrea...=1#post2738870
It is not hard if you are mechanically inclined. The resistors DO get warm/hot though so you have to mount them where they will do their job without touching anything that will melt or burn.
It is not hard if you are mechanically inclined. The resistors DO get warm/hot though so you have to mount them where they will do their job without touching anything that will melt or burn.
#37
Senior Member
Join Date: Jun 2007
Location: Bay Area
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
2008 W204
if the W204 is anything like the W203, it will be a pain to get anything other than the stock W5W bulbs working. Most aftermarket superwhite bulbs are 10W and will melt the plastic housings. The HOEN bulbs work ok, but some people have had problems with them as well (myself included). LED's have had thier share of problems from tracking down the correct resistors needed to eliminate the bulb out warning, to them burning out very quickly (less than 1mo), to constant flickering.
Good luck guys and hope you guys have it easier than we did!
Good luck guys and hope you guys have it easier than we did!
http://www.xtremewhite.com/ORD-Light...52-1-1-1-1.cfm
#38
MBWorld Fanatic!
i followed Snows advice and was able to switch out the license plate bulb and both trunk lights with super white bulbs. they look much better.
#39
MBWorld Fanatic!
i changed out my eyelid bulbs to hyper white and they are no where as bright as yours aowhaus
#40
Almost a Member!
Join Date: Apr 2008
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Marin Palisades Trail
Here is PIAA X-treme White Wedge Bulb, type 194 W5W
http://www.xtremewhite.com/ORD-Light...52-1-1-1-1.cfm
http://www.xtremewhite.com/ORD-Light...52-1-1-1-1.cfm
PIAA XTREME WHITE 5W
![](https://img441.imageshack.us/img441/2562/piaacz7.jpg)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#41
Super Member
Yea the Led's in White.. Im pretty sure i can figure it out.. just posted a question incase someones done it b4.. so i can be in and out of there..
I grabbed a pair from my friend at the lexus dealership (white 4300K).(yes... they will fit) ..So im gana post some pics when im done... maybe underglow(if i get really bored waiting for an oem backup camera from MB)
Thanks Guys
I grabbed a pair from my friend at the lexus dealership (white 4300K).(yes... they will fit) ..So im gana post some pics when im done... maybe underglow(if i get really bored waiting for an oem backup camera from MB)
Thanks Guys
PS -- I _still_ want it.
- Eric
#42
Almost a Member!
Join Date: Apr 2008
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Marin Palisades Trail
#43
Almost a Member!
Join Date: Apr 2008
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Marin Palisades Trail
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)