REQUESTING REFUND FOR $5 FOR COST OF NEW TAPE FROM CAR KING ROOF SPOILERS
#28
MBWorld Fanatic!
we know it is quick and easy to install new 3M tape but some people here dont have time to do it.
#30
MBWorld Fanatic!
Guys, because of the bending of the spoiler, the wax on your car and may b the hot weather, no tape will resist. Use 3M bonding (glue). (3M 08603 w/shield bonding sys blk 310ml) to make sure the trunk spoiler is fitted good and you sont lose it. (google on 3M 08603)
I had a spoiler from Lorinser on my previous car and it came together with bonding to stick it on my car, so no tape but glue.
Don't complain about quality
but use the bonding to fix your spoiler and it NEVER will come lose again. It is dry in 2 hours.
I have OEM front spoiler lips on my car WITH tape and has the same problem, it won't stick good. So it isn't Brad's fault, XtinaNoel OEM spoiler also came lose.
So spent some money on good stuff and you are sure you dont lose you spoiler.
I had a spoiler from Lorinser on my previous car and it came together with bonding to stick it on my car, so no tape but glue.
Don't complain about quality
![Argue](https://mbworld.org/forums/images/smilies/argue.gif)
I have OEM front spoiler lips on my car WITH tape and has the same problem, it won't stick good. So it isn't Brad's fault, XtinaNoel OEM spoiler also came lose.
So spent some money on good stuff and you are sure you dont lose you spoiler.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#31
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2007
Posts: 1,914
Likes: 0
Received 5 Likes
on
4 Posts
LOADED 08' C350 & 14' GLK-350 Diamond White (P1, MM, AMG Pkg, Ln Trkng, Htd Sts, Keylss Go)
![word](https://mbworld.org/forums/images/smilies/werd.gif)
I think the issue is the rigidity of the spoiler in general. That was the first thing I noticed. If you look at higher quality spoilers, they are rather flexible and easy to bend, thus easy to contour to the body being attached to. I don't think it's an issue with the double sided tape.
![word](https://mbworld.org/forums/images/smilies/werd.gif)
#32
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2007
Posts: 1,914
Likes: 0
Received 5 Likes
on
4 Posts
LOADED 08' C350 & 14' GLK-350 Diamond White (P1, MM, AMG Pkg, Ln Trkng, Htd Sts, Keylss Go)
Guys, because of the bending of the spoiler, the wax on your car and may b the hot weather, no tape will resist. Use 3M bonding (glue). (3M 08603 w/shield bonding sys blk 310ml) to make sure the trunk spoiler is fitted good and you sont lose it. (google on 3M 08603)
I had a spoiler from Lorinser on my previous car and it came together with bonding to stick it on my car, so no tape but glue.
Don't complain about quality
but use the bonding to fix your spoiler and it NEVER will come lose again. It is dry in 2 hours.
I have OEM front spoiler lips on my car WITH tape and has the same problem, it won't stick good. So it isn't Brad's fault, XtinaNoel OEM spoiler also came lose.
So spent some money on good stuff and you are sure you dont lose you spoiler.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
I had a spoiler from Lorinser on my previous car and it came together with bonding to stick it on my car, so no tape but glue.
Don't complain about quality
![Argue](https://mbworld.org/forums/images/smilies/argue.gif)
I have OEM front spoiler lips on my car WITH tape and has the same problem, it won't stick good. So it isn't Brad's fault, XtinaNoel OEM spoiler also came lose.
So spent some money on good stuff and you are sure you dont lose you spoiler.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![word](https://mbworld.org/forums/images/smilies/werd.gif)
sorry for the over reaction
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
just was ticked off since the dude should have tested and disclosed this before selling to a ton of people...
point is, u buy something that comes with tape, u dont expect to have to purchase new tape or take it to a body shop...
i broke my wrist tonight playing softbal... icein the shizz out of it right now... its pretty crooked... just realized its not a sprain... crap...
typin with 1 hand sucks, not to mention the hell of a time i will have trying to reattach the spoiler with one hand...
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
Last edited by rb23lb; 10-02-2008 at 06:51 AM.
#33
Member
Join Date: May 2005
Location: T.O.
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
2009 M.B. C300 Sport 6Sp
Just no communication telling me that I will actually be getting my spoiler..
I don't want it to go over a month, when I won't be able to file anything with paypal....
Just a simple email shouldn't take too long
#34
MBWorld Fanatic!
![word](https://mbworld.org/forums/images/smilies/werd.gif)
sorry for the over reaction
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
just was ticked off since the dude should have tested and disclosed this before selling to a ton of people...
point is, u buy something that comes with tape, u dont expect to have to purchase new tape or take it to a body shop...
i broke my wrist tonight playing softbal... icein the shizz out of it right now... its pretty crooked... just realized its not a sprain... crap...
typin with 1 hand sucks, not to mention the hell of a time i will have trying to reattach the spoiler with one hand...
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#35
MBWorld Fanatic!
I am doing this as a favor. But please don't hold me responsible, since I am not the 2nd GB starter.
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
#37
MBWorld Fanatic!
I think there are many people pleased (including me) that you started the GB and that you have done the communication. If they have troubles they have to send an email to Brad self. So dont feel responsible.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#38
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2007
Posts: 1,914
Likes: 0
Received 5 Likes
on
4 Posts
LOADED 08' C350 & 14' GLK-350 Diamond White (P1, MM, AMG Pkg, Ln Trkng, Htd Sts, Keylss Go)
UPDATE ON ROOF SPOILERS - ANYBODYS NEW 3M TAPE LIFT UP YET? ANYBODY USE GLUE?
UPDATE ON ROOF SPOILERS - ANYBODYS NEW 3M TAPE LIFT UP YET? ANYBODY USE GLUE?
Trying to figure out if it is worth it trying to retape it back on their with 3m double sided tape to replace the cheap taiwan tape, or if I should instead buy some type of glue or take it to a body shop to get put on permanently...
the unnatural bend makes me fear it will eventually pry up again over time...
just wanted to get an update on the latest from all who bought it to see if the 3M brand tape was actually holding over time...
thanks!
Trying to figure out if it is worth it trying to retape it back on their with 3m double sided tape to replace the cheap taiwan tape, or if I should instead buy some type of glue or take it to a body shop to get put on permanently...
the unnatural bend makes me fear it will eventually pry up again over time...
just wanted to get an update on the latest from all who bought it to see if the 3M brand tape was actually holding over time...
thanks!
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#39
Senior Member
Join Date: Oct 2007
Location: Reston, VA
Posts: 328
Likes: 0
Received 1 Like
on
1 Post
15 E350 4Matic
rb213lb,
I had to redo mine again even after I did the real 3M. It is not Brad's tape. However, my spoiler is curved like my roof line now after the 3M held it for a month or so. I am hoping this time it will hold longer since I re-applied it after I washed my car and let it sit in the sun for couple of hours. You need to calm down. For the price we paid, that is a reasonable product. Worst case, take it off and ebay it just like Brad. Seems like lots of other may want your spoiler
yxc,
Any chance the OEM spoiler have larger contact surface than what Brad produced? I think the issue maybe the 1/4 in on the 3 sides. I think 1/2 in would have been better but I have never seen an OEM version. I notice my top side of the spoiler is sticking to my windows really good and it is the 1/2 in 3M but the other sides are only 1/4 in and that seems to be where its peeling off. I tried to use 1/2 in on the vertical side this time. Hope that works out!
Thanks for the GB and you should not have to be the go between Brad and the others. You have better things to do and they can handle it themselves. Worst case dispute with Paypal..
For the rest of you guys, Brad is responsive as I communicated with him during the GB. He just take a bit to response. Tracking number really does nothing since it is for Taiwan. Mine came in two days after he said he shipped it out.
I had to redo mine again even after I did the real 3M. It is not Brad's tape. However, my spoiler is curved like my roof line now after the 3M held it for a month or so. I am hoping this time it will hold longer since I re-applied it after I washed my car and let it sit in the sun for couple of hours. You need to calm down. For the price we paid, that is a reasonable product. Worst case, take it off and ebay it just like Brad. Seems like lots of other may want your spoiler
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
yxc,
Any chance the OEM spoiler have larger contact surface than what Brad produced? I think the issue maybe the 1/4 in on the 3 sides. I think 1/2 in would have been better but I have never seen an OEM version. I notice my top side of the spoiler is sticking to my windows really good and it is the 1/2 in 3M but the other sides are only 1/4 in and that seems to be where its peeling off. I tried to use 1/2 in on the vertical side this time. Hope that works out!
Thanks for the GB and you should not have to be the go between Brad and the others. You have better things to do and they can handle it themselves. Worst case dispute with Paypal..
For the rest of you guys, Brad is responsive as I communicated with him during the GB. He just take a bit to response. Tracking number really does nothing since it is for Taiwan. Mine came in two days after he said he shipped it out.
#42
Junior Member
Join Date: Jul 2008
Location: Cary, NC
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
08 C350 Artic white, MM, PII, 18 AMG, Ipod
Hi Guys,
I received my roof spoiler as part of 2nd GB. After learning from your experience I didn't take chances. I bought 3M tape and applied to the one provided by Brad. 2 tapes instead of one that provided little extra cushion. I applied on Saturday after cleaning with alcohol pad, and placed heavy books to the edges. It's been 4 days and still holding. Also I placed the books back when inside garage for the first 3 nights.
Regards
I received my roof spoiler as part of 2nd GB. After learning from your experience I didn't take chances. I bought 3M tape and applied to the one provided by Brad. 2 tapes instead of one that provided little extra cushion. I applied on Saturday after cleaning with alcohol pad, and placed heavy books to the edges. It's been 4 days and still holding. Also I placed the books back when inside garage for the first 3 nights.
Regards
#43
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2007
Posts: 1,914
Likes: 0
Received 5 Likes
on
4 Posts
LOADED 08' C350 & 14' GLK-350 Diamond White (P1, MM, AMG Pkg, Ln Trkng, Htd Sts, Keylss Go)
anybody use glue?
mine just peeled up again for the second time... this time with real 3m tape... only peeled up on the corners though...
i used rubbing alcohol and real 3m tape for install on pristine clean glass...
I am wondering, anybody use glue, and if so, what type is best for this application to make it more "permanent"???
thanks,
i used rubbing alcohol and real 3m tape for install on pristine clean glass...
I am wondering, anybody use glue, and if so, what type is best for this application to make it more "permanent"???
thanks,
#46
Member
Join Date: Apr 2008
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
2008 Steel Grey C300 Sport 6MT
sorry to hear you are having problems...mine has been on with original tape from Brad for over a month...even been through a car wash twice...holding strong...must have been the lysol wipes i used to clean the glass...formed a super bonding seal
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
#49
MBWorld Fanatic!
#50
MBWorld Fanatic!
I received my roof spoiler from the GB today and it looks very nice.
I will probably remove the tape that's already on the spoiler as it is only 1/4" wide, and replace it with black 3M tape that's 1/2" wide so that it covers entire lip and wraps around into the cavity. I also don't want the tape to show on the inside through the glass as my spoiler is black.
I will probably spray a light coat of matte black paint in the inside cavity of the spoiler as I don't want the inconsistant paint finish on the inside to show through the glass either.
In the past, when installing any trim or spoiler with 3M tape I always clean the surface with a clay bar and rubbing alcohol (not at the same time). Before sticking the part on I heat both the surface and the part with a hair dryer so that is has a nice warm surface for the tape to stick to.
Since fall weather is here, I will keep my car in my heated garage and limit any driving for the next two days.
I'll keep you posted on how it goes.
I will probably remove the tape that's already on the spoiler as it is only 1/4" wide, and replace it with black 3M tape that's 1/2" wide so that it covers entire lip and wraps around into the cavity. I also don't want the tape to show on the inside through the glass as my spoiler is black.
I will probably spray a light coat of matte black paint in the inside cavity of the spoiler as I don't want the inconsistant paint finish on the inside to show through the glass either.
In the past, when installing any trim or spoiler with 3M tape I always clean the surface with a clay bar and rubbing alcohol (not at the same time). Before sticking the part on I heat both the surface and the part with a hair dryer so that is has a nice warm surface for the tape to stick to.
Since fall weather is here, I will keep my car in my heated garage and limit any driving for the next two days.
I'll keep you posted on how it goes.