Just ordered......
#1
MBWorld Fanatic!
Thread Starter
Just ordered......
For my M271 Engine...
Kleemann Headers with sport cat.
It leaves next week from Denmark , so it will be here end of next week
Special thanks to Steen Greeve from kleemann UK (SKG Perfromance)
The headers were on my wish list a long time, to complete my Brabus Exhaust....
Hope i can fit it soon!!!
#7
For my M271 Engine...
Kleemann Headers with sport cat.
It leaves next week from Denmark , so it will be here end of next week
Special thanks to Steen Greeve from kleemann UK (SKG Perfromance)
The headers were on my wish list a long time, to complete my Brabus Exhaust....
Hope i can fit it soon!!!
Trending Topics
#8
MBWorld Fanatic!
Join Date: Sep 2007
Location: Mississauga, ON CA
Posts: 1,258
Likes: 0
Received 19 Likes
on
14 Posts
15 Mercedes C400, 12 Mercedes C250 coupe
with the new headers, how will this fair with the stock exhaust?
also after the header upgrade can u also get by without engine management (ecu upgrades?)
also after the header upgrade can u also get by without engine management (ecu upgrades?)
#9
MBWorld Fanatic!
Thread Starter
Thanks
See above
See Kleemann's website :
More power - Better sound
The KLEEMANN tubular exhaust headers remove exhaust backpressure allowing the engine to breathe freely and thereby produce more power.
Supercharged as well as normally aspirated engines will benefit from the use of KLEEMANN stainless steel headers. A normally aspirated engine will typically gain 7 to 10 percent in horsepower and torque, while a supercharged engine will gain as much as 15 percent in horsepower and torque.
KLEEMANN headers are made of high quality stainless steel and feature mandrel bends, precision water-jet cut flanges, larger primary pipe diameters, and larger collectors and down-pipes. KLEEMANN headers integrate with the stock engine management flawlessly with no need for further modification.
Available for all Mercedes-Benz V6 and V8 engines
The KLEEMANN Tubular Exhaust Headers fit all V6 and V8 engines of 1998 and newer. Whether you own a six or an eight cylinder car with the M112/M113 - or the M272/M273-generation V8 engine KLEEMANN has a set of high flow exhaust headers that will add 20-30 Hp to your NA engine and up to 40-60 Hp to your forced induction V6/V8
Combined with a KLEEMANN exhaust system the sound is just phenomenal - something you have to experience.
More power for 4 cyl. models
New for 2006 is the tubular header for the four cylinder M271-engine mounted in all newer 180 and 200-models. Fitted with the new high flow header and down pipe power output is increased with up to 25 Hp on the 1.8 litre Kompressor engine.
Important notice: Our header and exhaust systems may not comply with noise and emission regulations of certain markets.
Last edited by Petje; 01-24-2009 at 03:18 AM.
#11
MBWorld Fanatic!
Thread Starter
See new image
Last edited by Petje; 01-24-2009 at 01:59 PM.
#13
MBWorld Fanatic!
Thread Starter
You motor code /type is M272 isnt it??
If it's the M272 than they have headers for your car also, see the kleemann catalogue 2009 on their website (www.kleemann.dk)
If it's the M272 than they have headers for your car also, see the kleemann catalogue 2009 on their website (www.kleemann.dk)
#14
MBWorld Fanatic!
Join Date: Sep 2007
Location: Mississauga, ON CA
Posts: 1,258
Likes: 0
Received 19 Likes
on
14 Posts
15 Mercedes C400, 12 Mercedes C250 coupe
You motor code /type is M272 isnt it??
If it's the M272 than they have headers for your car also, see the kleemann catalogue 2009 on their website (www.kleemann.dk)
If it's the M272 than they have headers for your car also, see the kleemann catalogue 2009 on their website (www.kleemann.dk)
#15
MBWorld Fanatic!
Thread Starter
Reaction received:
We have headers kit for M272 engine, but we haven’t tried it on the C300 W204.
Med venlig hilsen / Best regards
Ken Glintborg
Last edited by Petje; 01-26-2009 at 09:33 AM.
#17
MBWorld Fanatic!
Join Date: Sep 2007
Location: Mississauga, ON CA
Posts: 1,258
Likes: 0
Received 19 Likes
on
14 Posts
15 Mercedes C400, 12 Mercedes C250 coupe
Ya it is in prototype mode I heard. also an estimated price of $3,000 USD without install, dont quote me but thats what im hearing
might be a little too rich for my blood, plus i wanna wait till its actually tested and dyno'd
#19
MBWorld Fanatic!
Join Date: Mar 2008
Location: Hampton, GA
Posts: 1,420
Likes: 0
Received 2 Likes
on
2 Posts
CLK500 SPORT
that good can't wait to hear and see pics let us know if there is a power difference......i got a email back from kleemann and they have a supercharger in development for the M272 can't wait to hear more
#20
MBWorld Fanatic!
Thread Starter
Or someone with EPC can check if the oem headers are the same from a C300 and C350, if they have the same part # you can go for it.
Wow a supercharger for the M272, must be an expensive one, but if i had the M272 i would go for it if the price is a little bit normal.